|
Dockside Bumper
The ultimate in heavy impact protection
Rugged, air filled Heavy-wall molded PVC & integral inflation valve
Angled ends to deflect craft
Use Straight bumpers in pairs to form inside corners
Excellent gunnel protection
Industrial Strength with the Standard Quality and Performance of Dolphin Fenders
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
73.04 |
|
|
Dock Edge Dolphin Dockside Bumper
7" x 16"
The ultimate in heavy impact protection
Rugged, air filled Heavy-wall molded PVC & integral inflation valve
Angled ends to deflect craft
Use Straight bumpers in pairs to form inside corners
Excellent gunnel protection
Industrial Strength with the Standard Quality and Performance of Dolphin Fenders
Product Specifications:
Part No.: 1060-W-F
Description: Dock-Side Dock Bumper, 7" x 16", White
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
29.70 |
|
|
Dock Edge Dolphin Dockside Bumper 12 x 12 Corner White
The ultimate in heavy impact protection
Rugged, air filled Heavy-wall molded PVC & integral inflation valve
Angled ends to deflect craft
Use Straight bumpers in pairs to form inside corners
Excellent gunnel protection
Industrial Strength with the Standard Quality and Performance of Dolphin Fenders
Product Specifications:
Part No.: 1064-W-F
Description: Dock-Side Dock Bumper Corner, 12x12, White
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
48.68 |
|
|
Piling Post Bumper - One End Capped - 6' - White
Premium marine grade PVC construction
Molded-in UV Inhibitors & Fungicides
Integral strengthening ribs
Curved profile and extended legs make piling post mounts easier
Available in 6 Ft. Lengths
|
68.51 |
|
|
Dock Edge "C" Guard Economy PVC Profiles 10ft. Roll - White
This economy "C" Shape co-extruded Profile is made to exacting standards from Marine Grade PVC with UV Inhibitors and Fungicides. It will not crack or distort with temperature extremes. It comes in easy to install 10 Ft. coil. It can be used on flat surfaces as well as on pilings.
Product Specifications:
Part No.: 1132-F
Description: "C" Guard Profile, (10 Ft/Roll), White
WARNING: This product can expose you to chemicals including Titanium dioxide,Vinyl Chloride which are known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
24.28 |
|
|
4-Degree Wedge for Most Closed Dome Radars - 18"-24" - White
Improve your radar performance with a Seaview direct mount Angled Wedge. This wedge angles your radar 4 degrees below the horizontal. Goes directly underneath your radar. Fits major brands such as Garmin, Raymarine, Simrad, Furuno & more!
Features:
Simple and Easy Installation
Pre-drilled to fit your specific radar, allowing for quick and easy hassle-free installation.
Durable
Made from marine-grade polymer
Compatible Manufacturers:
B & G
Garmin
Humminbird
Koden
Lowrance
Raymarine
Simrad
|
177.60 |
|
|
Super Gard™ 8.5" x 26" Inflatable Vinyl Fender - White
Taylor Made Products has incorporated the latest in technology, design innovation, and attention to detail to bring you the finest looking, top performing protection for your dollar. Super Gard™ fenders are in a class of their own. Made from the highest quality marine grade vinyl, Super Gards™ feature a HIGH GLOSS finish and double molded black ends for extra strength where you need it the most. Seamless one-piece construction with ribbed sides minimizes roll, and a molded-in valve ensures easy inflation and long life.
Boat Size: 25' to 35'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
76.39 |
|
|
Storm Gard™ 8.5" x 27" Inflatable Vinyl Fender - White
Taylor Made Products introduces the latest in fender color technology. Introducing Storm Gard™ colors to our inflatable vinyl fenders. These fenders are in a class of their own, and feature all the same great qualities and Life Time Guarantee as our standard Hull Gard®, Super Gard™ and Big B™ fenders.
Integrated color agents provide added luster in sunlight.
Patented color enhancement process provides deeper richer colors.
Color matches depth of gelcoats on most boats.
Rubber football needle valve for easy inflation and long life.
Valve seats are integrally molded into the fender, not glued in like the competition.
Reinforced molded-in eyelets
Boat Size: 25' to 35'
Recommended inflation is 2 psi.
* The most accurate way to select the right fender for your boat is to survey your docking area to find out what fender is in use for the same size and weight of boat, in terms of fender dimensions and quantities, and use that as a guideline.
Lifetime Warranty against splitting or bursting
|
62.59 |
|
|
F-1 Twin Eye Fender 6" x 24" - White
Polyform has been producing the F Series fender for over 50 years and there is no comparison when it comes to quality, range of sizes, and protection offered.
The F Series fender has offered protection to the world's finest yachts and fishing vessels. Why? Because the owners and captains of these prestigious boats know that they can rely on Polyform’s F Series fenders to offer the size, strength, and dependability to protect their vessels from the rigors of the sea and weather. If you want the ultimate protection for your boat, Polyform F Series fenders are the only choice!
Classic European twin-eye style boat fenders for the most discerning eye.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 6" x 24" (15.24 x 60.96cm)
Eye Diameter - .7" (1.78cm)
Circumference - 18.9" (48cm)
Volume - 1.9 gallons (7.19L)
Boat Size - 20' - 25' (6.1 - 7.62M)
Weight - 2.6lbs
*Sold as an Individual
|
53.63 |
|
|
G-4 Twin Eye Fender 6.5" x 22" White with Adapter
Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.
Utility boat fenders with Polyform dependability.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 6.5" x 22" (16.5 x 55.9cm)
Eye Diameter - .75" (1.9cm)
Circumference - 20.4" (51.9cm)
Volume - 2.2 gallons (8.3L)
Boat Size - 20' - 25' (6.1 - 7.6M)
Weight - 2.7lbs
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
35.00 |
|
|
HTM-2 Fender 8.5" x 20.5" - White with Adapter
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 26.7" (67.9cm)
Volume - 4.7 gallons (17.8L)
Boat Size - 25' - 30' (7.6 - 9.1M)
Weight - 4.7lb
In the Box:
Fender
Inflation Adapter
*Sold as a Kit
|
62.23 |
|
|
G-4 Twin Eye Fender 6.5" x 22" White
Polyform’s G Series boat fender has raised the bar for quality and appearance in utility fenders. Subscribing to the philosophy that quality does not have to cost more, we include ribs for extra strength, inflation valves for larger sizes and reinforced ropeholds for long-term durability.
Utility boat fenders with Polyform dependability.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced ropeholds
Designed for use by trailered boats and in permanent protected moorings
Twin-eye design for vertical or horizontal use
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 6.5" x 22" (16.5 x 55.9cm)
Eye Diameter - .75" (1.9cm)
Circumference - 20.4" (51.9cm)
Volume - 2.2 gallons (8.3L)
Boat Size - 20' - 25' (6.1 - 7.6M)
Weight - 2.7lbs
*Sold as an Individual
|
34.45 |
|
|
HTM-2 Fender 8.5" x 20.5" - White
In keeping with the Polyform tradition of quality, the HTM (hole-through-middle) boat fender was designed to provide maximum protection in a wide variety of applications. Vertical ribs for extra protection, reinforced tube ends to prevent lines from pulling through if the fender gets caught in a tight spot, and extra wall thickness to resist punctures and tears are just a few of the features of this high-quality fender has to offer.
The HTM Series fender is designed to provide protection and stand-off for larger vessels between 20 to 50 feet in length.
Features:
Even wall thickness for maximum strength and durability
Molded-in ribs for strength and abrasion resistance
Reinforced tube ends
Designed for medium-duty use in both permanent protected and unprotected moorings
Unique Polyform valve for years of service
One (1) piece design
Technical Specifications:
Size (diameter x length) - 8.5" x 20.5" (21.6 x 52.1cm)
Tube Diameter - 0.625" (1.6cm)
Circumference - 26.7" (67.9cm)
Volume - 4.7 gallons (17.8L)
Boat Size - 25' - 30' (7.6 - 9.1M)
Weight - 4.7lb
*Sold as an Individual
|
61.68 |
|
|
Marine Auxiliary Accent Lighting Pod - 1.5" x 3" - White
SPECS
Input Voltage: 10-30V DC
White: (3-5W CREE LEDs)
Wattage: 15W
Raw Lumens: 1200/720
Beam Pattern: 120deg Flood
CONSTRUCTION
Housing Material: White Die-cast Aluminum Housing
Lens Material: PC
Mounting: Two Rubber Bases Included
Hardware: Stainless 316
OPERATION
Operating Temperature: -40degC to +60degC
Current Consumption: .2 amps at 13.8 volts
IP Rating: IP68
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
34.34 |
|
|
RGB Marine Accent Light - 1.5" x 3" - White/RGB
Whether you are fishing at night – cruising trails on your ATV – or want more lighting in your truck this 1.5 × 3 Inch RGB LED Accent Light provides endless RGB color options. Our accent lights can be used individually or combined with other accent lights to provide even more light. The white die-cast aluminum housing with a polycarbonate cover is virtually indestructible. With a 10 foot long cable you will have no problem reaching the area you need illuminated. Longer applications make use the waterproof 10 foot extension (HE-EXTRGB). This accent light provides 720 raw lumens from three 3 watt Cree LEDs and has a 120 degree beam pattern. This RGB accent light plugs into the Heise control box (HE-CBRGB).
Specifications:
Input Voltage: 10-30V DC (3-3W CREE LEDs)
Wattage: 9W
Raw Lumens: 720
Beam Pattern: 120 Degree Flood
Construction:
Housing Material: White Die-Cast Aluminum Housing
Housing Color: White
Lens Material: PC
Mounting: Cutout Template and Gasket Included
Hardware: Stainless 316
Operation:
Operating Temperature: -40 degrees F to +140 degrees F
Current Consumption: 0.2 Amps at 13.8 Volts
IP Rating: IP68
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
30.35 |
|