Dock Edge Stainless Steel Profile Fasteners 100 pcs. 1" Stainless Steel will prevent unsightly staining caused by rusting or regular steel fasteners. Recommended for use with all Profiles. Robertson driver bit included. Product Specifications: Part No.: 1006-F Description: Mounting Screws & Drivers, SS, (100 Pc/Pk)

Stainless Steel Louvered Vent - Oval - 9-1/8" x 4-5/8"  Louvered Vents are designed to promote air circulation and prevent mold, mildew, and unpleasant odors. Ideal for cabin doors, lockers, dock boxes, etc. Easy to install with six #6 RH fasteners (not included). Corrosion resistant stamped 304 stainless steel construction.

XKA Stainless Steel Trim Tab with ALC-1 Control - 12 x 24  The Lectrotab stainless steel trim tab design provides unmatched strength and reliability.  All stainless steel tabs are fabricated with a continuous rolled and pinned hinge.  This design eliminates the need for welding.  Combined with a precision-engineered actuator, this kit is built to combine quiet operation with a non-hydraulic, maintenance free design.  The unit is corrosion free, ensures very accurate tab positioning, provides maximum lift force, and is totally self-contained for easy installation.  The actuator assembly is packaged in a non-metallic permanently sealed housing.  No components need to be installed inside the boat.  Most importantly, unlike hydraulic trim tabs, there is no oil to leak out.  The actuator incorporates either a standard or low profile transom mounting bracket.  The Automatic Leveling Control (ALC) will automatically adjust your trim tabs to maintain a level boat for a more comfortable and enjoyable ride. Additionally, the ALC automatically corrects the roll from side to side and pitch from fore to aft to enhance your boating experience and improve your fuel economy. Features: Continuous rolled and pinned hinge provides added strength and eliminates the need for welding Upper ram seal location cannot be damaged due to fouled ram or barnacle growth Utilizes internal pressure equalization system Internal brake system prevents unwanted tab movement when under way or backing down Quiet operation Actuators are fully load tested to push 1000 lbs of force Non-metallic external structure which cannot corrode and will not deteriorate in the sun or under water Technical Specifications:  Trim Tab Size (L x W) - 12" x 24" (30 x 61 cm) Boat Length - 28' to 48' (8.5 to 14.5 M) Trim Tab Material - 12 gauge, 304 Stainless Steel  Actuator DC Voltage - 12 V Actuator Stroke Length - 2.25" (57 mm) Actuator Cable Length  - 23' (7 M) Actuator Vertical Height - 11.875" (302 mm) Control Dimensions (W x H) - 3.15" x 3.07" (80 x 77 mm) Control Mounting Hole Cutout - 2" (50 mm) Control Operating Voltage - 12 or 24 V In the Box: One (1) Automatic Leveling Control Two (2) Stainless Steel tabs Two (2) actuators w/23' (7 M) cables Instruction Manual  *Sold as a Kit

LED Docking Lights - Stainless Steel - White LED - Pair Compared to its 55-watt halogen competition, the Attwood Surface Mount LED Docking Light draws a fraction of the power while producing a brighter output. The Attwood product also transmits light in a much broader pattern as opposed to a narrow beam generated by today’s competitors. Simply put, Attwood’s docking light performs like a true “docking light” instead of a narrow-beam headlight.  Power draw and performance are important, but what about assembly? At 1.2" thick, the lights are designed to be mounted directly to the surface of the hull. With only a small hole for wiring and three (3) screws for attachment, Attwood’s surface mount design makes installation quick and ncomplicated.  This new LED Docking Light allows for fewer hull cuts and minimal intrusion while producing results that are reliable and attractive. Backed by a 10-year warranty, Attwood’s LED Docking Light is designed and tested for extreme conditions. Attwood used only the highest grade Stainless Steel and aluminum components to ensure the product is resistant to corrosion. The rubber gasket provided creates a barrier that protects your hull from water entry, ensures the light is watertight and keeps all electrical components fully sealed. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Welded Pad Eye - 2-1/4"L x 5/8"W Specifications: Eye Width 1/2" (13 mm) Eye Height 1/2" (13 mm) Eye Stock 1/4" (6 mm) Length 2-1/4" (57 mm) Width 5/8" (16 mm) Fasteners (2), #10 RH (5 mm) C/C 1-11/16" (42 mm) SWL 750 lbs. (350 kg) Weight 1.75 oz. (50 g)

Jabsco 17372-1000 Stainless Steel Wearplate For the following pumps: Caterpillar 3N4862 Detroit Diesel 8927568  

Compression Handle Stainless Steel Non-Locking 3" OD - 1/4 Turn Features: Stainless Steel Non-Locking 3" OD Compression Handle 1/4 Turn

Stainless Steel Ratchet Gunwale Tie-Down - 1" x 10' This 1" x 10' stainless steel ratchet gunwale features a stainless steel ratchet and 2 stainless steel S Hooks. 1,200 lb. capacity.

Stainless Steel Ratchet Gunwale Tie-Down - 1" x 13' This 1" x 13' stainless steel ratchet gunwale features a stainless steel ratchet and 2 stainless steel S Hooks. 1,200 lb. capacity.

Stainless Steel Ratchet Gunwale Tie-Down - 1" x 16' This 1" x 16' stainless steel ratchet gunwale features a stainless steel ratchet and 2 stainless steel S Hooks. 1,200 lb. capacity.

Stainless Steel Chain Stopper - 3/16" - 1/4" Chain Stoppers help prevent damage to the windlass and reduce the risk of accidental free fall of the anchor while under way. Chain Stoppers mount alone or inside most bow rollers and work with your anchor roller to take tension off your windlass. Chain and rope should be secured at anchor when your windlass is not in use to avoid high loads the windlass was not designed for. 321820 fits chain sizes 3/16" - 1/4". 321825 fits chain sizes 5/16" - 3/8". Constructed of corrosion resistant formed 304 stainless steel.

Stainless Steel Round Locker Ventilator 2-1/2" Features: Polished Stainless Steel Round 2-1/2"

Stainless Steel Round Locker Ventilator 3-1/4" Features: Polished Stainless Steel Round 3-1/4"

Stainless Steel Pipe to Hose Adapter - 1/4" IPS Stainless Steel Pipe to Hose Adapter - 1/4" IPS

RAM Stainless Steel U-Bolt Base w/1" Ball The RAM motorcycle handlebar base contains a 1" rubber ball designed to sit at right angles to the mounting rail. The rust proof metal u-bolt accommodates rails in diameter from 1" to 1.25" in diameter. The base also includes black cover caps to be placed over the exposed ends of the u-bolt. U-Bolt Dimensions: Accommodates rails from 1" to 1.25" in diameter. Material: Powder Coated Marine Grade Aluminum Ball Size: 1" Rubber Ball "B" Size Note: The "U" in the part number reflects product packaged in poly bag. If you prefer the RAM (RAM-B-231ZU) zinc coated u-bolt motorcycle handlebar base, click here.