25' Extension Cable Easily extend the 50 cable included with the PowerMax™ 4KSBR-50U Small Building Repeater System. Only to be used with cables 50' or less in length. 25 of DA340 cable Factory attached type N male and type N female connectors

Lowrance Extension Cable 25' extension cable. For use with LGC-3000 and red NMEA network.

RG-8X Cable with N Male, Mini-UHF Female - 30' RG-8X premium antenna cable is ideal for use with 800 and 900-series cellular and 700-series VHF antennas. A popular choice for custom installations, this antenna is 30 ft. long. For an 800 or 900-series cellular antenna, use the included DA624 mini-UHF male-to-male adapter to attach the antenna to a PowerMax™ cell booster. For a 700 series VHF antenna, a DA645 mini-UHF male to UHF male adapter is needed (sold separately). Features: Low loss, tinned braid, foil shielded, UV stable RG-8X antenna cable Factory-attached type N male and mini-UHF female connectors DA624 double mini-UHF male adapter included For a cellular cable that runs in excess of 40', use Digital Antenna’s PowerMax™ low loss antenna cables.

RG-8X Cable with N Male, Mini-UHF Female - 20' RG-8X premium antenna cable is ideal for use with 800 and 900 series cellular and 700 series VHF antennas. A popular choice for custom installations, it is available in 10', 20', 30' and 40' lengths. For an 800 or 900 series cellular antenna, use the included DA624 mini-UHF male to male adapter to attach the antenna to a PowerMax™ cell booster. For a 700 series VHF antenna, a DA645 mini-UHF male to UHF male adapter is needed (sold separately). Features: Low loss, tinned braid, foil shielded, UV stable RG-8X antenna cable Factory attached type N male and mini-UHF female connectors DA624 double mini-UHF male adapter included For cellular cable runs in excess of 40', use Digital Antenna’s PowerMax™ low loss antenna cables.

Extension Cable f/500 Series VHF/AIS Antennas - 10' An easy solution to extending the cable on Digital Antenna's 500 series VHF and AIS antennas. Simply connect the included double mini-UHF male adapter between the 500 series antenna's mini-UHF female connector and the 500 series extension cable's mini-UHF female connector. The cable's other end accepts the 500 series antenna's PL-259 adapter. All Extension Cables for 500 Series VHF/AIS Antennas Feature: Our exclusive low loss, tinned braid, foil shielded, UV stable RG-8X marine cable Factory attached mini-UHF female and mini-UHF female connectors DA624 mini-UHF double male adapter

Extension Cable f/500 Series VHF/AIS Antennas - 20' An easy solution to extending the cable on Digital Antenna's 500 series VHF and AIS antennas. Simply connect the included double mini-UHF male adapter between the 500 series antenna's mini-UHF female connector and the 500 series extension cable's mini-UHF female connector. The cable's other end accepts the 500 series antenna's PL-259 adapter. All Extension Cables for 500 Series VHF/AIS Antennas Feature: Our exclusive low loss, tinned braid, foil shielded, UV stable RG-8X marine cable Factory attached mini-UHF female and mini-UHF female connectors DA624 mini-UHF double male adapter

Wideband 695-3000 MHz Omni-Directional Bullet Antennas   Featured Products!   Digital Antenna's newest antenna, known as the bullet, provides excellent performance from LTE to WiMax and is ideal for mobile or fixed locations. Maximum performance and distance is achieved with its physically resonant design and outstanding VSWR of less than 1.5:1 in all 3G and 4G bands.           Specials     Rebates    Close Outs     Remanufactured

Antenna Extenders Constructed of high-quality reinforced fiberglass and finished to match Digital Antennas award-winning antennas, our antenna extenders are used to increase the height of an antenna to improve effective range or to place an antenna above on-board obstructions that may interfere with proper radiation. All extenders mount standard 1"14 threaded mounts. Use a center brace when the combined length of your antenna and all extensions is more than 8' All Antenna Extenders Feature: Heavy duty fiberglass Stainless steel ferrules 1"14 threaded top and base High gloss urethane finish 528-EW Dimensions: 4' - 1" O.D.This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

4' VHF/AIS White Antenna with 15' Cable The 594-MW is one antenna designed for the best performance on VHF and AIS signals. To ensure the most incredible AIS and VHF range, Digital Antenna’s new 4.5dB gain AIS/VHF antenna features a less than 1:5:1 SWR on both the VHF (156MHz) and AIS (162MHz) frequencies. Digital VHF radio-based transponder systems need antennas designed for digital signals. Digital Antenna is the only manufacturer to design all antennas to maintain and maximize digital signals for the best transmit and receive range. Ideal for use on any size commercial or recreational vessel. Perfect for use with combined VHF/AIS radios. Factory-installed mini-UHF connector (less than 3/8” OD) and included PL259 adapter make a quick and secure connection to the radio. (no soldering needed). Features: Designed for Digital AIS/VHF signals 4.5dBi Omni-directional gain Rugged fiberglass rod with UV stable finish Secure soldered connections 316 stainless steel base 1”x14 female threaded base 15’ premium low-loss RG-8X cable Factory-installed mini-UHF connector 5-year warranty Specifications: Radiation: Pattern Omni-Directional Gain: 4.5dBi Bandwidth: VSWR: < 1.5:1 = 1 56-162.5 MHz (6.5MHz) Cable: 15’ Digital Antenna exclusive low loss RG-8X Impedance: 50 ohms Max Input Power: 50 watts Exterior Finish: White polyurethane high gloss UV stable Dimensions: 4’ length x 1” OD taper Weight: 1.7 lbs RF Connector: Mini-UHF female with included PL259 adapter Installation: 1”x14tpi female threaded base Elements: Brass - Hand soldered Polarization: Vertical Wind Rating: >160KPH Operating Temp: 30º F to +175º F Warranty: 5 Years Compliance: Automatic Identification System (AIS) Use with all AIS class A and B transceivers, AIS transponders, Smart AIS transponders, AIS receivers, auxiliary civil services, multi-use radio service (MURS), 2-way land mobile, VHF marine radio, narrow band FM, VHF SATCOM, Automatic Identification System (AIS), and NOAA Weather Stations. Applications:  Commercial Recreational Government vessels where AIS is required

50' SRC-50 Extension Cable For longer cables runs, pick the appropriate length Shakespeare SRC Series cable kit for your installation.  These cable kits must be run as a single piece and cannot be joined together. Features: Cable length - 50' Pre-installed SMB and RNC connectors Cable material - RG-58 Compatible with: SRA-25 antenna SRA-40 antenna SRA-50 antenna *Sold as an Individual 

90' SRC-90 Extension Cable For longer cables runs, pick the appropriate length Shakespeare SRC Series cable kit for your installation.  These cable kits must be run as a single piece and cannot be joined together. Features: Cable length - 90' Pre-installed SMB and RNC connectors Cable material - RG-58 Compatible with: SRA-25 antenna SRA-40 antenna SRA-50 antenna *Sold as an Individual 

18" Antenna Extender - White Constructed of high-quality reinforced fiberglass and finished to match Digital Antennas award-winning antennas, our antenna extenders are used to increase the height of an antenna to improve effective range or to place an antenna above on-board obstructions that may interfere with proper radiation. All extenders mount standard 1"14 threaded mounts. Use a center brace when the combined length of your antenna and all extensions is more than 8' Features: Heavy duty fiberglass Stainless steel ferrules 1"14 threaded top and base High gloss urethane finish This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

4' Cellular Antenna Digital Antenna's 1100 series antennas with a collet ferrule ensure no cable twisting and allows the antenna to be removed when needed. This new technique allows the use of existing coax or a new run of premium low loss cable. A taperedcollet securely locks Digital Antenna's 1100 series antenna to the bottom ferrule which mounts standard 1"-14 threads. All marine antennas are manufactured in the USA with 316 surgical stainless, UV stable high gloss finish and precision soldered components. Features: Sleek, rugged design Locking collett allows antenna to be attached without twisting cable Large connector pass thru Mounts to standard 1"-14 mount or mount with U-bolt to a pole This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

4' VHF Antenna Digital Antenna's 1100 series antennas with a collet ferrule ensure no cable twisting and allows the antenna to be removed when needed. This new technique allows the use of existing coax or a new run of premium low loss cable. A taperedcollet securely locks Digital Antenna's 1100 series antenna to the bottom ferrule which mounts standard 1"-14 threads. All marine antennas are manufactured in the USA with 316 surgical stainless, UV stable high gloss finish and precision soldered components. Features: Sleek, rugged design Locking collett allows antenna to be attached without twisting cable Large connector pass thru Mounts to standard 1"-14 mount or mount with U-bolt to a pole This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

528-VW 4' VHF Antenna with 15' Cable - White Voted the best 4' VHF antenna by PowerBoat Reports, Digital Antennas 4' VHF antennas are ideal for use on T-tops, speedboats and sailboats. With 4.5dB gain and award-winning quality construction, these powerful and compact antennas deliver high performance that will last for years. Customers and installers love the 500 GOLD Series easy installation connector system. The gold factory-attached mini-UHF female connector with PL-259 (UHF) adapter makes connecting to the radio easy, eliminating the need to solder connectors. All of Digital's antennas are made in the USA, assembled, tested and tuned by hand for maximum performance, quality and durability. Features: Powerful brass radiators Soldered connections Power directing ferrite choke bead High gloss urethane finish 316 stainless steel ferrule 4.5dB gain 500 GOLD Series: Mount: Standard 1"14 threaded base Connector: Gold factory-attached mini-UHF female with mini-UHF male to UHF male (PL259) adapter Cable: Includes 15' of Digital's low-loss, tinned braid, foil shielded, UV stable RG-8X marine cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.