|
Air-Dryr™ Mildew Fighter
Say Goodbye to Mold, Mildew and Moisture
1458 Air-Dryr 1000. Handles up to 1000 cubic feet of living space. Draws only 1.1 amps,130 watts. Circular unit measures 13.5" in diameter (34 cm) and 4.25" high (11 cm). EU model handles up to 28 cubic meters of living space.
Air-Dryrª is an inexpensive and effective way to fight moisture problems, cold drafts, and corrosion. Designed to operate anywhere, 24 hours a day. Place Air-Dryr on the floor in any damp, enclosed space and plug into a 110/120 volt outlet. The damp air is heated to the point moisture is held in suspension (above dew point), then released through the top vents of the device. As warmed air rises, cooler damp air is drawn in, where it too is heated. Air-Dryr costs no more to operate than the burning of a light bulb. A thermal cutoff turns the unit off should air flow be impeded.
Key Features of all Air-Dryr Units:
Attractive, neutral beige housing made of polycarbonate for strength and durability
Slim and stable
Can be placed out of the way in confined spaces
Handle a high volume of air
Designed to be left on 24 hours a day
Safe to the touch
Low operating cost
Trouble free
no switch, fan, or thermostat; uses natural convection to circulate the air
Silent operation
Safe for marine use
no components which cause sparking
UL listed
Use at Home or Office
Basements
Closets
Under Desks
Storage Units
Tack Rooms
Pump Rooms
Gun Cabinets
Pianos
Use in RVs
Motor Homes
Trailers Cars Airplanes
Use in Boats
Cabins
Bilges
Engine Rooms
V-Berths
|
60.76 |
|
|
Air-Dryr™ Mildew Fighter
Say Goodbye to Mold, Mildew and Moisture
1459 Air-Dryr 500. Handles up to 500 cubic feet of living space. Draws only 0.6 amps, 70 watts. Rectangular unit measures 14 x 5 x 4.5" (36 x 13 x 11 cm). EU model handles up to 14 cubic meters of living space.
Air-Dryrª is an inexpensive and effective way to fight moisture problems, cold drafts, and corrosion. Designed to operate anywhere, 24 hours a day. Place Air-Dryr on the floor in any damp, enclosed space and plug into a 110/120 volt outlet. The damp air is heated to the point moisture is held in suspension (above dew point), then released through the top vents of the device. As warmed air rises, cooler damp air is drawn in, where it too is heated. Air-Dryr costs no more to operate than the burning of a light bulb. A thermal cutoff turns the unit off should air flow be impeded.
Key Features of all Air-Dryr Units:
Attractive, neutral beige housing made of polycarbonate for strength and durability
Slim and stable
Can be placed out of the way in confined spaces
Handle a high volume of air
Designed to be left on 24 hours a day
Safe to the touch
Low operating cost
Trouble free
no switch, fan, or thermostat; uses natural convection to circulate the air
Silent operation
Safe for marine use
no components which cause sparking
UL listed
Use at Home or Office
Basements
Closets
Under Desks
Storage Units
Tack Rooms
Pump Rooms
Gun Cabinets
Pianos
Use in RVs
Motor Homes
Trailers Cars Airplanes
Use in Boats
Cabins
Bilges
Engine Rooms
V-Berths
|
47.26 |
|
|
Air Blower 1000 Inline 250 - 24V
7″ in-line mounted marine ventilation 24V axial blower with capacity 1000 m3 per h, 589 CFM. 178mm port connection and 250mm length. Sheltered blades from blower housing interference at tough installation. Compact 5 blade design to maximize performance.
Features:
Weight: 1.4 kg/3 lbs
Dimensions: 250/9.8L x 220/8.7H x 178/7W mm/in
Type: 7" In-Line
For continous duty. 3,5A fuse
Interchangeable with Vetus Vent17824A.
*Certification: CE marked ISO 9097:1991 Marine (small craft electrical fans), ISO8846 1990 (ignition protection), ISO 10133 2000 (electrical systems), EN55014-1 2006 (2004/108EC)
|
200.69 |
|
|
Air Blower 1000 Inline 165 - 12V
7″ in-line mounted marine ventilation 12V axial blower with capacity 1000 m3 per h, 589 CFM. 178mm port connection and 165mm length. Sheltered blades from blower housing interference at tough installation. Compact 5 blade design to maximize performance.
Features:
Weight: 1.2 kg/2 lbs
Dimensions: 165/6.5L x 220/8.7H x 178/7W mm/in
Type: 7" In-Line
For continous duty
7A fuse
*Certification: CE marked ISO 9097:1991 Marine (small craft electrical fans), ISO8846 1990 (ignition protection), ISO 10133 2000 (electrical systems), EN55014-1 2006 (2004/108EC)
|
197.16 |
|
|
Air Blower 1000 Inline 165 - 24V
7″ in-line mounted marine ventilation 24V axial blower with capacity 1000 m3 per h, 589 CFM. 178mm port connection and 165mm length. Sheltered blades from blower housing interference at tough installation. Compact 5 blade design to maximize performance.
Features:
Weight: 1.2 kg/2 lbs
Dimensions: 165/6.5L x 220/8.7H x 178/7W mm/in
Type: 7" In-Line
For continous duty
3,5A fuse
Certification: CE marked ISO 9097:1991 Marine (small craft electrical fans), ISO8846 1990 (ignition protection), ISO 10133 2000 (electrical systems), EN55014-1 2006 (2004/108EC)
|
200.69 |
|
|
Air Blower 1000 In-Line 250 - 12V
7″ in-line mounted marine ventilation 12V axial blower with capacity 1000 m3 per h, 589 CFM. 178mm port connection and 250mm length. Sheltered blades from blower housing interference at tough installation. Compact 5 blade design to maximize performance.
Features:
Weight: 1.4 kg/3 lbs
Dimensions: 250/9.8L x 220/8.7H x 178/7W mm/in
Type: 7" In-Line
For continous duty
7A fuse
Interchangeable with Vetus Vent17812A.
*Certification: CE marked ISO 9097:1991 Marine (small craft electrical fans), ISO8846 1990 (ignition protection), ISO 10133 2000 (electrical systems), EN55014-1 2006 (2004/108EC)
|
197.16 |
|
|
Jabsco 18596-1000 Gasket (Pair)
|
13.43 |
|
|
D-XL PRO Diffused - Pair - Black
With the enormous popularity of the original D-Series came the need for a slightly larger, more powerful lighting solution. The D-XL PRO boasts more light than ever before in a housing that measures 4"x4". Recent improvements to the LEDS in the D-XL Series PRO with the Professional Race Output of up to 170% more raw lumens while maintaining the efficiency that is the hallmark of the entire product line. Featuring an unbreakable polycarbonate lens, durable UV-resistant polyester powder coat, stainless steel hardware, and a vibration isolator, the D-XL Series PRO is available with your choice of beam pattern optics. Recent updates include RIGID branding and blacked-out circuit boards for a more refined look. Whether it's off-road, power sports, general automotive, mining, agriculture, or fire and rescue, the D-XL PRO is perfect for any application that requires a high intensity LED light.
Features:
Stainless Steel Hardware
Includes: Harness, Bracket, and All necessary mounting hardware
UV-resistant Polyester Powder-Coat
Unbreakable Polycarbonate Lens
Vibration Isolator
Specifications:
Watts: 67
Amp Draw: 4.79
LED's: 9
Raw Lumens: 7128
Lux @ 10m: 39.8
Beam Distance: 63.1 m
Peak Beam Intensity: 3980 cd
|
414.00 |
|
|
AirForce® Quick Draw Portable Pet Dryer - Orange
With this powerful, handheld pet dryer, it’s possible to dry a pet safely in minutes. This dog and cat dryer has a lightweight frame for easy portability.
Catalog Part Number: QD-1
Features:
This pet dryer produces 10 times more blowing power than a human hair dryer, and best of all, it's safe for all pets because there's no heating element to dry out their coats or burn their skin.
Technical Specifications:
Motor: 1.3 HP
Amps: 8.3 AMPS
Watts: 1000 Watts
Airflow: 85 CFM/160 MPH
Cord: 12 in.
Plug: Two (2) prong electrical plugs
Weight: 3.1 pounds
Dimensions (inch): 4.5" x 7.5" x 9.75"
In the Box:
Dryer
6" hose with airflow control
Easy change filter x 1
Air concentrator nozzle
Air flare nozzle
Table mounting hook
Instruction Manual
|
146.00 |
|
|
Stor-Dry 9406 110V Warm Air Circulator & Dehumidifier - 75W
Low wattage warm air circulator. Prevents mold and mildew. Great for boat storage.
The Stor-Dry low wattage warm air circulator is the "must-have" product for the winterization season. The model 9406 Stor-Dry combats mold, mildew, and musty odors in any boat that is closed up or winterized. This dual-action air dryer uses a low-wattage heating element and internal fan to both heat and circulates the air. The heat and circulation prevent stale air pockets which in turn prevent mold or mildew from forming on the interior surface of the boat.
Features:
Dual-action of fan and heating element
Low power consumption of 90 watts
Raises the ambient temperature above the dew point
Corrosion-resistant aluminum
Rugged construction
Made in Canada
2-year warranty
Benefits:
Superior performance overheating element only products
No maintenance required
Effective in areas up to 1000 cubic feet
Controls mold and mildew
Ready to use out of the box
Odor free boats
Years of trouble free use
|
104.29 |
|
|
Air-Flow Tels
Lightweight, ripstop nylon Air-Flow Tels attach to sails with waterproof adhesive locator discs. No holes required. Tels show the air flow across the sails - allowing you to trim sails for maximum performance.
Each kit includes 14 Tels and full instructions on where to apply them and how to read them.
|
10.13 |
|
|
March 0986-0002-1000 Air Motor 1/8 Hp
|
730.00 |
|
|
March 0125-0106-1000 Mounting For 809 Series
March Pump Mounting Bracket for 809 Series Base (Mtr Connecting) for Air Motors 12 & 24 volt only
|
33.48 |
|
|
March 0809-0161-1000 809 Brc Imp Shaft W/ D Flat
|
7.56 |
|
|
Yamada NDP-20BAN-D Drum Pump
Yamada Pumps NDP-20BAN Type, Model 851515 NDP-20 Series, Air Operated Double Diaphragm Pump, Buna N Diaphragm, Buna N Flat Check Valve / O-Rings, Aluminum (ADC-12) Material, 31.7 GPM Max Flow, 3/4" NPT Fluid Port, 3/8" Female NPT (includes ball valve) Air Inlet, 3/4" Female NPT (includes silencer) Air Exhaust, Aluminum Air Motor, 18 Feet Max Suction Lift
|
1228.80 |
|