Fittings for use with 4300/43C series universal cables.

Stainless Steel Cushion Clamps - 2" - 10-Pack Stainless steel cushion clamps prevent corrosion and are resistant to oils, acids and salt water. Features: Temperatures range from -50° to 300° F Absorbs shock and vibration Reduces unwanted noise 1/4" clearance mounting hole WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Stainless Steel Cushion Clamps - 2-1/2" - 10-Pack Stainless steel cushion clamps prevent corrosion and are resistant to oils, acids and salt water. Features: Temperatures range from -50° to 300° F Absorbs shock and vibration Reduces unwanted noise 1/4" clearance mounting hole WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Steering Trim Control Unit Trim Switches on the Steering Wheel Improve Safety and Performance.  This steering trim control unit is molded of black plastic with raised white letters to not only enhance boat appearance but also provide the ultimate in control of any high performance boat. The steering trim control unit mounts easily to steering wheel spokes to place engine trim control at your finger tips for maximum safety and ease of operation. The weather proof, rubber booted, push button switches combined with a black urethane coiled cord provide a unit which will provide trim control without removing hands from steering wheel. Features: Puts trim switches on steering wheel for convenience and safety Allows driver to keep both hands on the steering wheel Mounts easily on steering wheel spokes Weatherproof rubber booted switches Rugged urethane coiled cord Can be used for trim control or jack plate control WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Transom Trim Control Push Button Trim Switch Transom Trim Control Switch/Hydraulic Jack Plate Switch Put a trim switch or hydraulic jack plate anywhere you want with this versatile switch.  The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions. Features: Trim switch for outboards or stern drives Hydraulic jack plate switch Puts Tilt & Trim Control Anywhere Weatherproof Control Switches UV stable molded housing Can Also Operate Power Jack Plates WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rectangular Base - Rail Fitting 2-Hole Base Description: 316 S.S. 90° 2-Hole Base Outer Diameter: 7/8" Base: 2-7/8" x 1-1/4" Fastener: 1/4" (2) Weight: 4.4.oz.

Rectangular Base - Rail Fitting 2-Hole Base Description: 316 S.S. 90° 2- Hole Base Tube Outer Diameter: 1" Base: 2-13/16" x 1-5/16" Fastener: 1/4" (2) Weight: 5.0 oz.

SystemPod Pre-Cut for Garmin GPSMAP® 1242 & 1222xsv with 2 Holes for 9.5" Wide Angle Guard SystemPods are for mounting a Radar or Chartplotter and Instruments together at the helm. Navigation at your fingertips… “Where you need it when you need it.” SystemPods are the smart solution for mounting your Radar or Chartplotter and Instruments together at the helm where you can easily operate and clearly see the fine details of the screen. A SystemPod is best mounted on a Single Bend AngleGuard. Structural Rigidity – The Gen3 enhancements now include a thicker gauge acrylic capped ABS material that improves strength and provides better structural rigidity. This thicker material allows for a larger waterproof seal. The better the structural rigidity, the less flexing when tightening and the more uniform the pressure on the seal. The excellent UV stability of the acrylic is combined with the durability of the ABS. The acrylic cap protects the ABS from UV and its potentially damaging effects on plastic. Waterproof Seal – All SystemPods are manufactured with a double gasket system providing an excellent watertight seal. This seal provides the best protection for your Marine Electronics. SystemPods are made to withstand the harshest wet offshore boating conditions. Gen3 enhancements include a thicker external silicone gasket with an improved flush fit. The internal Poron Microcell Polyurethane gasket is now 50% thicker and is not subject to a “compression set” like many rubber compounds. This is important when you need to open the SystemPod in the future in order to service your electronics. The gasket will continue to do its job. Nickel Chrome Plated Stainless Steel – We use all 316 stainless steel hardware that is supplied with each NavPod. Large round head tamperproof screws have deeper sockets for the NavPod wrench for better holding ability when tightening than screws used on our Traditional Series NavPod. For Gen3 NavPods we provide nickel chrome-plated stainless steel tamperproof screws for security combined with a little style! Commitment to quality - We stand behind our commitment by offering a 10-year warranty on all new Gen3 NavPods.

Myers Pumps 25886A500 Venturi Plastic 1/2 Hole Myers 25886A500 Venturi for use with Model HJ50S, Series HJ, HR

RAM® Vibe-Safe™ with NPT Adapter for 2-Hole Holders The RAM® Vibe-Safe™ Adapter for 2-hole Holders (RAP-462NPT) is a vibration-damping accessory designed to protect electronic devices from a wide range of vibration frequencies. The RAM® Vibe-Safe™ is based on an NPT connection point and boasts the versatility to rotate between portrait and landscape while keeping the device secure in rugged environments. This adapter is compatible with most 2-hole RAM® holders, including the RAM® Quick-Grip™, RAM® Tough-Charge™, RAM® Quick-Charge™ & RAM® Form-Fit Holders. The RAM® Vibe-Safe™ is only compatible with the metal diamond ball adapter (RAM-B-238U). Features: RAM® Vibe-Safe™ dampens a wide range of vibration frequencies NPT thread connection allows for rotation between portrait and landscape while remaining secure Compatible with RAM® holders with a 2-hole AMPS hole pattern, and the metal diamond ball adapter (RAM-B-238U) for any B-size ball and socket mount Unique structure and thoughtfully designed with all industries in mind Backed by a lifetime warranty Specifications: Hardware Included: (2) #10-32 x 7/16" Machine Screws, (2) #8-32 x 1/2" Machine Screws, and (2) #8-32 Nylock Nuts Product Dimensions: Overall Length: 3.38", Overall Width: 3", Overall Thickness: 1.36" Hole Pattern: 2-Hole AMPS: 1.912" Materials: High-strength composite Packaging Type: Retail Bag Weight: 0.3 lbs

Hypro 3300-0002, 1/2" M X 1/2" F Bronze Relief Valve 200 PSI Ports-NPT Inlet (M) Outlet (F): 1/2" M x 1/2" F Max PSI: 200 Body Material: Cast Bronze Valve Material: Stainless Steel Ball

Sierra fuel line assemblies meet or exceed both USCG safety regulations and EPA evaporative emissions requirements. Assemblies consist of engine connector, low-perm primer bulb and tank connectors. Designed to be used in connection with 18-8078 large bore 13mm tank adapter. 2-stroke DT model complete with 13mm tank adapter to replace small (11mm) and large (13mm) bore fuel line assemblies. 4-stroke DF model designed with 13mm quick-disconnect tank connector and a prong engine connector to replace most 15 to 140HP assemblies. Hi visibility display packaging.

Max Control Holding Tank Deodorant - 1-Gallon Max Control Advanced formaldehyde-free formula.  Long lasting treatment eliminates and controls holding tank odors by breaking down waste and toilet tissue.  Features: 4 ounces treats a 40 gallon holding tank Formaldehyde-Free Formula Easy to use. See-through window stripe and 8-oz. increment marks make measuring easy One (1) Gallon container New Item # 9108557756  *Sold by the Gallon WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Max Control Holding Tank Deodorant - 32oz Bottle Max Control Advanced formaldehyde-free formula.  Long lasting treatment eliminates and controls holding tank odors by breaking down waste and toilet tissue.  Features: 4 ounces treats a 40 gallon holding tank Formaldehyde-Free Formula Easy to use. See-through window stripe and 8-oz. increment marks make measuring easy 32 oz. Container New Item # 9108557757  *Sold by the 32 oz. Container WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Max Control Holding Tank Deodorant - Four (4) Pack of 8oz Bottles Max Control Advanced formaldehyde-free formula.  Long lasting treatment eliminates and controls holding tank odors by breaking down waste and toilet tissue.  Features: 4 ounces treats a 40 gallon holding tank Formaldehyde-Free Formula Easy to use. See-through window stripe for measuring ease Eight (8) oz. Container New Item # 9108557759  *Sold by the four (4) Pack WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.