Fittings for 3300 and 33C series shift and throttle control cables.

Fittings for 3300 and 33C series shift and throttle control cables.

12-10 AWG - 5/16" Nylon Ring Terminal - 25-Pack Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection. Features: Nylon insulated with insulation grip Double crimp, funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12-10 AWG - 5/16" Nylon Ring Terminal - 100-Pack Ancor's Marine Grade terminals differ from automotive terminals by being designed for the harsh marine environment. Nylon insulators are easy to crimp and will not split. Barrels are designed to tightly grip the wire with the least effort. Tinned copper gives the least electrical resistance but the most corrosion protection. Features: Nylon insulated with insulation grip Double crimp, funnel entry UL 486C WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12-10 Gauge - 5/16" Heat Shrink Ring Terminal - 25-Pack Gauge Size: 12-10 Screw Size: 5/16" Quantity: 25 Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12-10 Gauge - 5/16" Heat Shrink Ring Terminal - 100-Pack Gauge Size: 12-10 Screw Size: 5/16" Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

12-10 Gauge - 5/16" Heat Shrink Ring Terminal - 3-Pack Gauge Size: 12-10 Screw Size: 5/16" Quantity: 3 Product Features: Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage UL Listed and CSA Recognized Highest shrink ratio - shrinks to 1/3 original size Shrinks at 257° F/125° C Operating temperature range 40° C to 110° C ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing Shrinks to form a water tight seal and the ultimate vibration and strain relief Tinned for corrosion resistance Pure copper for maximum current flow Brazed seam for maximum strength WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Swivel Shackle - 5/16" Pin - 2-3/8"L x 21/32"W Features: Coined head pin 7.9mm(5/16") Diameter Pin Grade 316 Stainless Steel bodies and pins Stainless Steel ball bearing race

Wide Dee Shackle - 5/16" Pin - 2"L x 1-3/32"W Features: 5/16" pin diameter High strength to weight ratio

Halyard Shackle - 7.9mm(5/16") Pin Halyard Shackles have a lever action for easy opening and closing, with a keyed pin for positive locking Features: High strength to weight ratio Grade 316 stainless steel bodies and pins

Fittings for 3300 and 33C series shift and throttle control cables.

Standard Dee Shackle - 7.9mm(5/16") Pin Features: High strength to weight ratio Grade 316 stainless steel bodies and pins

Twisted Shackle - 5/16" Pin - 1-7/8"L x 5/8"W Features: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Coined shackle pin head

Bow Shackle - 5/16" Pin - 1-1/16"L x 7/8"W Features: High strength to weight ratio Grade 316 Stainless Steel bodies and pins Coined shackle pin head

Swivel Cleat Fairlead - 2-8mm(3/32-5/16") Rope Diameter Swivel cleat bases permit easy cleating and releasing from any angle.Dead eyes contain stainless steel liners for low friction and long life. Cleating plates are heavy guage alloy for stiffness and minimum distortion under load. Features: 360° Rotation Small T-Cleat & Fairlead Applications: Sheet leads and halyards on dinghies and catamarans Materials: Alloy cleating arms Grade 316 Stainless Steel fittings