Original Equipment Quality Replacement Tilt Trim Motor with 96" Leads - 2 Wire, 3-Bolt Mount Replacement tilt trim motor that will fit BRP-OMC. 2-wire connection, Includes O-ring,3-bolt mount, Male Spade Terminal Ends, 96” Leads  ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: BRP-OMC Tilt Trim Motor 391264 BRP-OMC Tilt Trim Motor 393259 BRP-OMC Tilt Trim Motor 393988 BRP-OMC Tilt Trim Motor 395840 BRP-OMC Tilt Trim Motor 434795 BRP-OMC Tilt Trim Motor 983019 BRP-OMC Tilt Trim Motor 983446 BRP-OMC Tilt Trim Motor 985237 SIERRA Tilt Trim Motor 18-6759 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Replacement Johnson/Evinrude Tilt Trim Motor - 2-Wire, 4 Bolt, Flat Blade Shaft Replacement outboard tilt trim motor that will fit BRP-OMC, 60, 70, 90, 115, 150, 175 HP. 1991-Up 200, 225 HP, 1991-94 120, 140 HP, 1995-UP 50 HP 3-cyl, 60 HP, V4 130 HP, 1997-Up 115-200 HP, 1998-99 225 HP, 2-wire connection, 4-bolt mount, Flat-blade shaft, Female Spade Terminal Ends.  ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: BRP-OMC Tilt Trim Motor 434495 BRP-OMC Tilt Trim Motor 434496 BRP-OMC Tilt Trim Motor 438529 BRP-OMC Tilt Trim Motor 438531 BRP-OMC Tilt Trim Motor 5005374 BRP-OMC Tilt Trim Motor 5005376 SIERRA Tilt Trim Motor 18-6780 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Control Engine Trim with Pro-Trim Single, or any two functions with Pro-Trim Dual. Fits Safe-T mechanical steering, Rack & Pinion Steering, NFB No Feedback steering (all helms), SeaStar and SeaStar PRO hydraulic steering, Command 200 Rack & Pinion, Baystar, Sport, Sport Plus or Classic Tilt mechanism. “Momentary-On” switch is off in its center “at-rest” position. Switch actuates in up and down directions. U.V. stabilized ABS switch cover blends with dash. Stainless steel bracket fits most steering & adjusts for regular or deep dish wheels. Heavy duty marine wiring harness, color coded to match existing trim & jackplate wiring. Mylar decals for labeling of switch functions. Mounting hardware, instructions included. Display packed.

Control Engine Trim with Pro-Trim Single, or any two functions with Pro-Trim Dual. Fits Safe-T mechanical steering, Rack & Pinion Steering, NFB No Feedback steering (all helms), SeaStar and SeaStar PRO hydraulic steering, Command 200 Rack & Pinion, Baystar, Sport, Sport Plus or Classic Tilt mechanism. “Momentary-On” switch is off in its center “at-rest” position. Switch actuates in up and down directions. U.V. stabilized ABS switch cover blends with dash. Stainless steel bracket fits most steering & adjusts for regular or deep dish wheels. Heavy duty marine wiring harness, color coded to match existing trim & jackplate wiring. Mylar decals for labeling of switch functions. Mounting hardware, instructions included. Display packed.

Control Engine Trim/Tilt, Jackplate or Horn with Pro-Trim Single, or any two functions with Pro-Trim Dual. Fits Safe-T mechanical steering, Rack & Pinion Steering, NFG No Feedback steering(all helms), SeaStar and SeaStar PRO hydraulic steering, Command 200 Rack & Pinion, Baystar, Sport, Sport Plus or Classic Tilt mechanism. "Momentary-On" switch is off in its center "at-rest" position. Switch actuates in up and down directions. U.V. stabilized ABS switch cover blends with dash. Strainless steel bracket fits most steering & adjusts for regular or deep dish wheels. Heavy duty marine wiring harness, color coded to match existing trim & jackplate wiring. Mylar decals for labeling of switch functions. Mounting hardware, instructions included. Display packed.

Control Engine Trim/Tilt, Jackplate or Horn with Pro-Trim Single, or any two functions with Pro-Trim Dual. Fits Safe-T mechanical steering, Rack & Pinion Steering, NFG No Feedback steering(all helms), SeaStar and SeaStar PRO hydraulic steering, Command 200 Rack & Pinion, Baystar, Sport, Sport Plus or Classic Tilt mechanism. "Momentary-On" switch is off in its center "at-rest" position. Switch actuates in up and down directions. U.V. stabilized ABS switch cover blends with dash. Strainless steel bracket fits most steering & adjusts for regular or deep dish wheels. Heavy duty marine wiring harness, color coded to match existing trim & jackplate wiring. Mylar decals for labeling of switch functions. Mounting hardware, instructions included. Display packed.

Steering Trim Control Unit Trim Switches on the Steering Wheel Improve Safety and Performance.  This steering trim control unit is molded of black plastic with raised white letters to not only enhance boat appearance but also provide the ultimate in control of any high performance boat. The steering trim control unit mounts easily to steering wheel spokes to place engine trim control at your finger tips for maximum safety and ease of operation. The weather proof, rubber booted, push button switches combined with a black urethane coiled cord provide a unit which will provide trim control without removing hands from steering wheel. Features: Puts trim switches on steering wheel for convenience and safety Allows driver to keep both hands on the steering wheel Mounts easily on steering wheel spokes Weatherproof rubber booted switches Rugged urethane coiled cord Can be used for trim control or jack plate control WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Original Equipment Quality Replacement Tilt Trim Motor for Late Model Volvo Penta with Oildyne Pump - 2 Wire Replacement tilt trim motor that will fit 6227, Late model Volvo Penta, w/Oildyne pump, 2-wire connection.  ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: VOLVO Tilt Trim Motor 3151278 VOLVO Tilt Trim Motor 3858071 VOLVO Tilt Trim Motor 854525-3 SIERRA Tilt Trim Motor 18-6805 SIERRA Tilt Trim Motor 18-6817 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Single Lever Top Mount Control w/Neutral Lock - No Trim Switch - Black In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G

Single Lever Top Mount Control w/Neutral Lock - No Trim Switch - Chrome In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G

Twin Lever Top Mount Control w/Neutral Lock - No Trim Switch - Black In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G

Twin Lever Top Mount Control w/Neutral Lock - No Trim Switch - Chrome In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants. Features: Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling Chrome plated high resistance ABS housing control with die cast chrome plated levers Push in button disengages shift for warm-up X12 neutral safety switch which prevents in-gear starting (optional) Exceeds EN ISO 11547 standards when X12 safety switch is installed For use with all Ultraflex control cables except C4: C14 and MACH14 cables require no kit for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included C5, C16 and MACH5 cables require K60 Kit - 40145E C36 and MACH36 cables require K62 Kit - 40157J C22 cable requires K61 Kit - 40146G

SR-M Series Pro Spot Surface Mount - Black  Among the smallest, most compact products that RIGID offers, the SR-M PRO (Single Row-Mini Professional Race Output) still packs a lot of lighting power with an impressive output up to 111% more raw lumens thanks to improved LED technology.  The size of SR-M PRO makes it highly adaptable to a variety of uses, including everything from a flood light on a toy hauler, handlebar-mounted lights for motorcycles and many other power sports applications. Common automotive uses include back bumper lighting. With a range of beam patterns in your choice of optics, the SR-M PRO is one of the brightest mini LED lights on the market.  In addition to more powerful LEDs, recent updates include branding and blacked-out circuit boards make the SR-M PRO more powerful and refined than ever before. They feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand.  Features: Blacked-Out Circuit Board GORE® Pressure Equalizing Vent Harness & Switch Included (Exclusions Apply) High-Grade Aluminum Alloy Heatsink IP68 Compliant -Dust / Water Ingress 50,000+ Hour Lifespan 9-36 V DC Patented Technology Impact Resistant Polycarbonate Lens Integrated Thermal Management System What's Included? Mounting Hardware Stainless Steel, U-Shape Bracket (Excludes FM) Solid Black Light Cover (Excludes FM) Harness w/Switch Deutsch Connector ∗Sold as an Individual

SR-M Series Pro Diffused Flush Mount - Black Among the smallest, most compact products that RIGID offers, the SR-M PRO (Single Row-Mini Professional Race Output) still packs a lot of lighting power with an impressive output up to 111% more raw lumens thanks to improved LED technology.  The size of SR-M PRO makes it highly adaptable to a variety of uses, including everything from a flood light on a toy hauler, handlebar-mounted lights for motorcycles and many other power sports applications. Common automotive uses include back bumper lighting.  With a range of beam patterns in your choice of optics, the SR-M PRO is one of the brightest mini LED lights on the market. In addition to more powerful LEDs, recent updates include new branding and blacked-out circuit boards make the SR-M PRO more powerful and refined than ever before. They feature the same superior build quality as the rest of RIGID’s lighting products, providing reliable and efficient lighting on demand. Features: Blacked-Out Circuit Board GORE® Pressure Equalizing Vent Harness & Switch Included (Exclusions Apply) High-Grade Aluminum Alloy Heatsink IP68 Compliant -Dust / Water Ingress 50,000+ Hour Lifespan 9-36 V DC Patented Technology Impact Resistant Polycarbonate Lens Integrated Thermal Management System In the box: Mounting Hardware Stainless Steel, U-Shape Bracket (Excludes FM) Harness w/Switch Deutsch Connector ∗ Sold as an Individual

129ATP Hydraulic Trim Tab Complete Kit with Auto Trim Pro Hydraulic trim tabs are known for power, precision and durability. Get the most from your boat, no matter what the load, speed or sea conditions. Using the helm control, you can adjust the tabs individually or in unison to create the perfect cruising attitude. Increase speed and fuel economy, smooth a rough ride and get on plane faster.  Kits Include: (2) Trim plane assemblies (2) Hydraulic actuators (1) Hydraulic Power Unit Hydraulic tubing and hardware Helm Control Features: Get on plane fast and stay on plane at intermediate speeds Correct listing and uneven loads Improve visibility and safety Reduce pounding and eliminate porpoising Low maintenance, long-term value and ease of service Exclusive transom mount interlocking tab design Sport batwing option (M80/M120) provides 30% more lift Bottom and piano hinge mounts are available for custom order WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.