Original Equipment Quality Replacement Tilt Trim Motor with 96" Leads - 2 Wire, 3-Bolt Mount Replacement tilt trim motor that will fit BRP-OMC. 2-wire connection, Includes O-ring,3-bolt mount, Male Spade Terminal Ends, 96” Leads  ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: BRP-OMC Tilt Trim Motor 391264 BRP-OMC Tilt Trim Motor 393259 BRP-OMC Tilt Trim Motor 393988 BRP-OMC Tilt Trim Motor 395840 BRP-OMC Tilt Trim Motor 434795 BRP-OMC Tilt Trim Motor 983019 BRP-OMC Tilt Trim Motor 983446 BRP-OMC Tilt Trim Motor 985237 SIERRA Tilt Trim Motor 18-6759 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Control Engine Trim/Tilt, Jackplate or Horn with Pro-Trim Single, or any two functions with Pro-Trim Dual. Fits Safe-T mechanical steering, Rack & Pinion Steering, NFG No Feedback steering(all helms), SeaStar and SeaStar PRO hydraulic steering, Command 200 Rack & Pinion, Baystar, Sport, Sport Plus or Classic Tilt mechanism. "Momentary-On" switch is off in its center "at-rest" position. Switch actuates in up and down directions. U.V. stabilized ABS switch cover blends with dash. Strainless steel bracket fits most steering & adjusts for regular or deep dish wheels. Heavy duty marine wiring harness, color coded to match existing trim & jackplate wiring. Mylar decals for labeling of switch functions. Mounting hardware, instructions included. Display packed.

Replacement Johnson/Evinrude Tilt Trim Motor - 2-Wire, 4 Bolt, Flat Blade Shaft Replacement outboard tilt trim motor that will fit BRP-OMC, 60, 70, 90, 115, 150, 175 HP. 1991-Up 200, 225 HP, 1991-94 120, 140 HP, 1995-UP 50 HP 3-cyl, 60 HP, V4 130 HP, 1997-Up 115-200 HP, 1998-99 225 HP, 2-wire connection, 4-bolt mount, Flat-blade shaft, Female Spade Terminal Ends.  ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor. Features: Tilt trim motors are dynamically tested to ensure out-of-the-box performance  Motor shafts induction case hardened at bearing surfaces for superior wear resistance  Epoxy Powder coated for maximum insulation protection Warranty Information: When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.  Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration  Replaces: BRP-OMC Tilt Trim Motor 434495 BRP-OMC Tilt Trim Motor 434496 BRP-OMC Tilt Trim Motor 438529 BRP-OMC Tilt Trim Motor 438531 BRP-OMC Tilt Trim Motor 5005374 BRP-OMC Tilt Trim Motor 5005376 SIERRA Tilt Trim Motor 18-6780 This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Control Engine Trim/Tilt, Jackplate or Horn with Pro-Trim Single, or any two functions with Pro-Trim Dual. Fits Safe-T mechanical steering, Rack & Pinion Steering, NFG No Feedback steering(all helms), SeaStar and SeaStar PRO hydraulic steering, Command 200 Rack & Pinion, Baystar, Sport, Sport Plus or Classic Tilt mechanism. "Momentary-On" switch is off in its center "at-rest" position. Switch actuates in up and down directions. U.V. stabilized ABS switch cover blends with dash. Strainless steel bracket fits most steering & adjusts for regular or deep dish wheels. Heavy duty marine wiring harness, color coded to match existing trim & jackplate wiring. Mylar decals for labeling of switch functions. Mounting hardware, instructions included. Display packed.

Designed specifically to be used with late model Mercury 4000 series controls. Engineered to significantly reduce or eliminate cable "Wig-Wag", this design results in a significantly improved feel with less shifting effort. Improves the feel of the Mercury 4000 Series Controls. Nickel plated brass swivel tube. WHILE QUANTITIES LAST.

Mercury/Mercruiser 600A type cable. Complete drop-in replacement cable for Mercury/Mercruiser engines. Stainless steel & brass fittings. Stainless cable wire. WHILE QUANTITIES LAST.

Mercury/Mercruiser 600A type cable. Complete drop-in replacement cable for Mercury/Mercruiser engines. Stainless steel & brass fittings. Stainless cable wire. WHILE QUANTITIES LAST.

OMC 479 type cable (1979 & later). Complete drop-in replacement cable for OMC O/B and I/O's. Stainless steel and brass fittings. 6" minimum bend radius. WHILE QUANTITIES LAST.

Designed specifically to be used with late model Mercury 4000 series controls. Engineered to significantly reduce or eliminate cable "Wig-Wag", this design results in a significantly improved feel with less shifting effort. Improves the feel of the Mercury 4000 Series Controls. Nickel plated brass swivel tube.

Designed specifically to be used with late model Mercury 4000 series controls. Engineered to significantly reduce or eliminate cable "Wig-Wag", this design results in a significantly improved feel with less shifting effort. Improves the feel of the Mercury 4000 Series Controls. Nickel plated brass swivel tube.

Control Engine Trim with Pro-Trim Single, or any two functions with Pro-Trim Dual. Fits Safe-T mechanical steering, Rack & Pinion Steering, NFB No Feedback steering (all helms), SeaStar and SeaStar PRO hydraulic steering, Command 200 Rack & Pinion, Baystar, Sport, Sport Plus or Classic Tilt mechanism. “Momentary-On” switch is off in its center “at-rest” position. Switch actuates in up and down directions. U.V. stabilized ABS switch cover blends with dash. Stainless steel bracket fits most steering & adjusts for regular or deep dish wheels. Heavy duty marine wiring harness, color coded to match existing trim & jackplate wiring. Mylar decals for labeling of switch functions. Mounting hardware, instructions included. Display packed.

Control Engine Trim with Pro-Trim Single, or any two functions with Pro-Trim Dual. Fits Safe-T mechanical steering, Rack & Pinion Steering, NFB No Feedback steering (all helms), SeaStar and SeaStar PRO hydraulic steering, Command 200 Rack & Pinion, Baystar, Sport, Sport Plus or Classic Tilt mechanism. “Momentary-On” switch is off in its center “at-rest” position. Switch actuates in up and down directions. U.V. stabilized ABS switch cover blends with dash. Stainless steel bracket fits most steering & adjusts for regular or deep dish wheels. Heavy duty marine wiring harness, color coded to match existing trim & jackplate wiring. Mylar decals for labeling of switch functions. Mounting hardware, instructions included. Display packed.

Smoother and lower effort steering system. Quick connect feature on both cable and spent travel tube side. No tools required to snap steering cable or spent travel tube in place. Easy system installation, single steering cable to route with standard 8" bend radius. Fits standard dash cut out for Safe-T and 4.2 bracket. Gear train is custom designed to allow the smallest foot print with the lowest effort available in a mechanical Helm. Improved NFB clutch "feel" to allow smoother clutch release. Includes NFB helm, bezel and Xtreme cable.

3 Blade stainless interchangeable hub propeller for 40-140 horsepower engines with thru hub exhaust, 4-1/4" gear case. Category D prop. Requires RBX™ hub kit for installation.

Prop kits containing thrust washer, spacer, washer, nut and cotter pin. Complete kit contents depends upon application.