OMC 479 type cable (1979 & later). Complete drop-in replacement cable for OMC O/B and I/O's. Stainless steel and brass fittings. 6" minimum bend radius. WHILE QUANTITIES LAST.

Designed specifically to be used with late model Mercury 4000 series controls. Engineered to significantly reduce or eliminate cable "Wig-Wag", this design results in a significantly improved feel with less shifting effort. Improves the feel of the Mercury 4000 Series Controls. Nickel plated brass swivel tube. WHILE QUANTITIES LAST.

Xtreme® premium control cables provide smooth, easy action with minimum lost motion. Superior feel at the controls, especially in multi-station vessels. Patented splined core with ridges that allow a close fit with the cable's inner liner, but with minimum contact so the core glides back and forth smoothly. .34" super tough HDPE jacket for ultimate protection from the elements.

Replacement cable for Mariner low horsepower engines when used with Mercury controls. Uses existing connection components. Also used for converting old Mercury control boxes to Japanese motors. Stainless & brass fitting, stainless cable wire.

Drop-in replacement cable for engines with controls that accept cable with 10-32 threaded ends. Mercury Sport Jet requires connection kit #CA27319P for engine end. Stainless steel conduit fittings. 3" nominal travel. 4" minimum bend radius. Packed one per box.

Replacement rotary steering cable with simple snap-in connection. Direct replacement for SSC61 and SSC72 cables. Stainless steel core.

Mercury/Mercruiser 600A type cable. Complete drop-in replacement cable for Mercury/Mercruiser engines. Stainless steel & brass fittings. Stainless cable wire.

Drop-in replacement cable for Mercury/Mercruiser engines using 600A type cable. Splined core allows easy movement and minimum lost motion. Designed for complex and/or long cable runs, or to simply create a superior feel. Stainless steel fittings and cable wire. 4" min. bend radius. Packed one per box.

Drop-in replacement cable for OMC outboard and I/O engines using 479 type cable. Splined core allows easy movement and minimum lost motion. Designed for complex and/or long cable runs, or to simply create a superior feel. Stainless steel fittings and cable wire. 4" min. bend radius. Packed one per box.

Transom Trim Control Push Button Trim Switch Transom Trim Control Switch/Hydraulic Jack Plate Switch Put a trim switch or hydraulic jack plate anywhere you want with this versatile switch.  The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions. Features: Trim switch for outboards or stern drives Hydraulic jack plate switch Puts Tilt & Trim Control Anywhere Weatherproof Control Switches UV stable molded housing Can Also Operate Power Jack Plates WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

3" travel, 10-32 thread stainless steel ends. Stainless 16 strand Lubri-Core wire for smooth operation. 6" minimum bend radius. Stainless steel rods, hubs, and end fittings. Covered core wires with moisture protective seals help protect against corrosion and lengthen cable life. UV resistant polyethylene outer jacket resists abrasion and withstands effects of salt water, chemicals, gasoline, and oil.

RJ45-M Ethernet Adapter Cable RJ45-Yellow Round Ethernet adapter cable for Simrad NSO evo2 and Zeus2 displays.

Steering Trim Control Unit Trim Switches on the Steering Wheel Improve Safety and Performance.  This steering trim control unit is molded of black plastic with raised white letters to not only enhance boat appearance but also provide the ultimate in control of any high performance boat. The steering trim control unit mounts easily to steering wheel spokes to place engine trim control at your finger tips for maximum safety and ease of operation. The weather proof, rubber booted, push button switches combined with a black urethane coiled cord provide a unit which will provide trim control without removing hands from steering wheel. Features: Puts trim switches on steering wheel for convenience and safety Allows driver to keep both hands on the steering wheel Mounts easily on steering wheel spokes Weatherproof rubber booted switches Rugged urethane coiled cord Can be used for trim control or jack plate control WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

MPPT Charge Controller Remote Panel with 25' Cable PPT Remote Display Provides real-time data about your solar system. Designed for quick and easy installation. Includes 25' cable.

EnviroComfort ECD6KZ-HV AC Retrofit Kit - 6,000 BTU - 230V The Dometic Marine Air 6,000 BTU EnviroComfort Air Conditioning Retrofit Kit provides reverse-cycle cooling and heating capability so you stay comfortable onboard year-round.  This 6,000 BTU unit replaces an older self-contained air conditioner of comparable capacity in the 5,000 to 7,000 BTU range. All units have high-velocity blowers with internal motors for a more compact installation footprint.  The blower can be rotated to a horizontal or vertical position for greater installation flexibility.  Units are built on an easy-to-plumb stainless-steel drain pan, and the pre-installed return-air filter is removable for cleaning. ECD kits are ideal for replacing an existing air conditioning system or for a new air conditioning installation.  The Retrofit Kit includes the ECD self-contained air conditioning unit and digital control with bezel and is intended to replace an older self-contained air conditioner of comparable capacity. Legacy Part Number - 207500307 Features: High-velocity, rotatable blower for horizontal or vertical installation Environmentally friendly R-410A refrigerant Easy to use Dometic Passport I/O digital control and display (P/N 9600005997) Plastic remote electrical box for convenience in mounting Stainless-steel drain pan Pre-installed return-air filter, easily removable and cleanable Small, compact, space-saving design Specifications: Input voltage - 230 V Starting amps - 34 A Fuse Max. / Min. - 20 A/12 A Input frequency 50/60 Hz Refrigerant type - R410A Colling capacity - 6,000 BTU Min. supply duct size - 4" Seawater inlet connection - .625" Dimensions - Height 11.25" x Width 16" x Depth 9"  In the Box: Self-contained AC unit Digital control w/bezel and 15' cable Instruction manual *Sold as an Individual  WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.