Grand Slam 800 VHF Antenna Mount The GS-800 VHF Antenna Mount was created specifically to prevent climbing on the boat gunnel to raise and lower a VHF antenna. Lift and descend the antenna from the safety of the deck from under the top. Its smooth operation, attractive machined aluminum frame and cast stainless-steel rotator make this item a must for any boater.  Features: Safe, no-hassle raising and lowering of a VHF antenna  No more climbing on T-tops or gunnels  Machined / Anodized aluminum body  Light brushed finish  Polished Type-316L stainless steel crank handle  Folding crank handle locks flush into base  Threaded shaft for consistent lift and descent  Delrin bearings for smooth operation  Roller bearings in crank assembly  Mounts through up to 2" thick hardtops  Includes 4" x 1/4" round backing plate (hardware not included)  Made in the USA  1-year limited warranty 

Wedge Plate for GS-800 & GS-900 In case your T-top has a slight curve, keep the appearance of your Grand Slam 800 VHF Antenna Mount and Grand Slam 900 Masthead Anchor Light clean by mounting them perfectly straight with our plastic wedge plates.  Features & Benefits: Corrects the angle of GS-800 and GS-900 to perpendicular to the T-top  Fits Grand Slam 800 VHF Antenna Mount and Grand Slam 900 Masthead Anchor Light No drilling Sold individually 1-year limited warranty

Grand Slam 400 Outrigger Top Mount - Pair TACO Marinenow offers a higher performance outrigger mount with their 400 series specifically designed for boat lengths surpassing 50’ and quad engines exceeding 1600 horsepower. The center console market continues to grow and so does the size of its vessels and the engines that power them. The new GS-400 provides the upgrade in strength to easily handle the increasing outrigger pole lengths in both Aluminum and Carbon Fiber for up to 30’. Experience the difference with this new high performance series of outrigger mounts. Features and Benefits Increased surface area on the hard top plate Increased thickness of the 6" x 8" oval hard top plate to 3/4" to reduce flex Larger top tube with longer bearing surface for improved stability Extended upper casting to prevent tube buckling Compatible with TACO Marine aluminum and carbon fiber poles (1-1/2" diameter) Ideal for use on high performance boats with 3, 4 or 5 engines Double the amount of top assembly hardware compared to Grand Slam 280 series Stainless lever grip for additional strength New mushroom outrigger twist and lock pin for one hand operation Eight bolt pattern attachment for increased arm and pole support Increased thickness in the backing plate to 1/2" Uses same bolt and hole pattern for installation as current Grand Slam series Sold in Pairs Three year limited warranty

Grand Slam 170 Outrigger Top Mounts - 1-1/8" (Pair) Simple, strong and perfect for boats 24' and under, our Grand Slam 170 Outrigger Mounts are the ideal addition to make your boat into an offshore fishing machine. Their easy installation and attractive appearance will make your days on the water more productive. Features: Compatible with 1-1/8" Tele-Outrigger Poles Adds up to 30-feet of fishing spread Stainless-steel and Anodized Aluminum construction Sure-Grip knob allows lift adjustments every 18° Locking lever secures out-bound rotation to desired location Delrin bearings allow for smooth, secure operation Easy installation with the outrigger-ready mounting plates Sold in pairs 3-year limited warranty

Grand Slam 850 Electric VHF Antenna Mount Designed with safety and innovation in mind, boaters can adjust the position of their VHF antenna with the simple push of a button from the comfort of their helm. The GS-850 is a fully electric unit with hidden wires inside the hardtop. This mount easily installs to the surface of the hardtop and fits all top thicknesses. Features: Standard 1”-14 thread (male) shaft to accept standard VHF antennas  No under-mount clearance required  Machined / Anodized aluminum body with a light brushed finish  Threaded shaft for consistent lift and descent  Delrin bearings for smooth operation  Features removable set screw for manual adjustment  Kit includes drill template and installation instructions  Includes 10” lead for 12-volt DC power supply for lift and descent  Accepts 3A fuse in the main +12 VDC power feed (not included)  Sold individually  Made in the USA  1-year limited warranty

Grand Slam 280 Outrigger Top Mount The GS-280 is the 4th generation of the top mount that sets the standard in the industry. Its rugged design will provide years of reliable service even in the most challenging saltwater applications. The redesigned locking head provides secure outrigger height positioning using TACO's spline lock technology which provides a positive lock with minimal parts for increased reliability. TACO's further enhanced the rotator lever to provide a sleek and ergonomic shape, using polished Stainless Steel and UV-resistant non-slip Santoprene. Features For use on 20'-36' fishing boats Fits both hardtop and soft top applications Designed to fit the industry standard TACO Outrigger-Ready Mounting Plate Rugged stainless steel and anodized aluminum construction 12 locking fishing positions Uses TACO's spline lock technology for secure outrigger elevation Ergonomic shaped rotator lever Polished 316 Stainless Steel arm assembly and lever Brushed anodized aluminum body Top-mounted 4" x 6" mounting base Compatible with TACO Metals 1-1/2" heavy-duty Telescoping TeleOutriggers Fits TACO Metals Clamp-On Mounting Plates Sold in pairs

Grand Slam 2801 Outrigger Top Mount The GS-2801 is the 4th generation of the top mount that sets the standard in the industry. Its rugged design will provide years of reliable service even in the most challenging saltwater applications. The redesigned locking head provides secure outrigger height positioning using TACO's spline lock technology which provides a positive lock with minimal parts for increased reliability. TACO's further enhanced the rotator lever to provide a sleek and ergonomic shape, using polished Stainless Steel and UV-resistant non-slip Santoprene. The GS-2801 features an off-set handle. Features For use on 20'-36' fishing boats Fits both hardtop and soft top applications Designed to fit the industry standard TACO Outrigger-Ready Mounting Plate Rugged stainless steel and anodized aluminum construction 12 locking fishing positions Uses TACO's spline lock technology for secure outrigger elevation Ergonomic shaped rotator lever Polished 316 Stainless Steel arm assembly and lever Brushed anodized aluminum body Top-mounted 4" x 6" mounting base Compatible with TACO Metals 1-1/2" heavy-duty Telescoping TeleOutriggers Fits TACO Metals Clamp-On Mounting Plates Sold in pairs

Grand Slam 170-2 Center Mount Uses TACO's spline lock technology for secure outrigger elevation Designed for use with standard 1-1/8" butt OD outriggers Locks every 18° Derlin bearings and stainless steel internal locking mechanism offer smooth adjustments, secure positioning and prevent movement Rugged, sure-grip knob adjusts and locks-in desired height & laydown position for safe trailering and navigation under bridges Stainless steel arm with locking feature ensures TACO outriggers remain securely in place

GPS / VHF Antenna Mount for Self Levelling Radar Mount Single mount for installing an additional GPS / VHF antenna above the radar. Features Attaches to top of radome cradle Fits all standard GPS / VHF antennas with 1? x 14 tpi thread attachment Materials Marine grade 316 stainless steel GPS / VHF Antenna Mount Kit 1 x GPS / VHF mount 2 x M6 x 8mm bolts 2 x M6 spring washers

Grand Slam 390 Mount with 180° Handle For anglers craving a more competitive edge on the water, the heavy-duty Grand Slam 390 Outrigger Mount steps up to the challenge. We took all the durable, dependable features of the popular GS-380 and incorporated a more robust gusset and thicker arm to withstand the torque and pressure created when using longer outrigger poles. This base is perfect for the bigger, faster center console boats between 25’ and 40’. Anglers can easily deploy an outrigger’s vertical lift and horizontal rotation from the boat deck in rough seas. Additionally, the GS-390 comes equipped with our secure pin-locking technology and pairs well with TACO’s Deluxe Aluminum and Carbon Fiber Tele-Outriggers. For tops that require additional hand clearance, we also offer the GS-390-180, which has a fore-facing rotation handle. Features: Stronger gusset support and thicker arm for enhanced durability Elevation crank handle provides lift from under the T-top Allows for horizontal rotation from under the T-top Offset handle for better hand clearance Cast stainless-steel Type-316L and machined aluminum construction A strong locking head allows perfect positioning Pairs with TACO Deluxe Aluminum or Carbon Fiber Tele-Outriggers Tested and proven quality Sleek appearance 3-year limited warranty

Grand Slam 390BHC Outrigger Mount - Black Anodized Aluminum This mount has all of the durable, dependable features of the popular GS-390, but with a black hard coat anodized aluminum finish – providing superior protection from the elements and style. The GS-390BHC has a robust gusset and heavy-duty arm to withstand the torque and pressure created when using longer outrigger poles. This base allows anglers to easily deploy an outrigger’s vertical lift and horizontal rotation from the boat deck in rough seas. Additionally, the GS-390BHC comes equipped with our secure pin-locking technology and pairs well with TACO’s Deluxe Aluminum and Carbon Fiber Tele-Outriggers. Features & Benefits: Two outrigger mounts Boats between 25 ft. – 40 ft. 4" x 6" mounting base Maximum thickness of T-top (inch): 2-5/8" Patent number US7114283 Black hard coat anodized aluminum Stronger gusset support and thicker arm for enhanced durability The elevation crank handle provides lift from under the T-top 35º upward lift angle Allows for horizontal rotation from under the T-top Offset handle for better hand clearance Cast stainless-steel Type-316L and machined aluminum construction Strong locking head allows perfect positioning Pairs with TACO Deluxe Aluminum or Carbon Fiber Tele-Outriggers Tested and proven quality Sleek appearance 3-year limited warranty *Sold as a pair

Grand Slam 380XL Outrigger w/Offset Handle f/Hard Tops up to 4-1/2" Thick Taco Sport Fishing introduces the GS-380XL, created to meet the growing demands of the marine industry's larger segment of top performance center console boats. Like its predecessor, the GS-380, our GS-380XL offers all the same features and more. Built with a focus in mind to accommodate the needs of the elite center console market which are being built with thicker hardtops that will hold more electronics as well as performance sport fishing equipment. Our GS-380XL will accommodate hard tops up to 4-1/2" in thickness, which can be found on boats 35' to 50'. The new design also offers an extra 2-1/2" of body thickness and two added positions for mounting the handles, either at a 0° or at a 90°, offering additional hard top clearance. Features and Benefits For use on 35' to 50' boats Increased body length to fit hard tops up to 4-1/2" Same profile as the Taco Sport Fishing GS-380 Complete vertical outrigger adjustment from under the hard top Optional 90° handle mounting position for more lever rotation Compatible with Taco Marine hardware including backing plates and wedge plates Designed for hard top applications Rugged Stainless Steel Type 316 and anodized Aluminum construction 12 locking fishing positions Ergonomic shape rotator lever Top mounted 4" X 6" base Compatible with Taco Sport Fishing 1-1/2" heavy duty telescopic outriggers (Aluminum or Carbon Fiber) Sold in pairs Three year limited warranty

Grand Slam 390 Outrigger Mount for 1-1/2" Outrigger TACO took all the durable, dependable features of the popular GS-380 and incorporated a more robust gusset and thicker arm to withstand the torque and pressure created when using longer outrigger poles. This base is perfect for the bigger, faster center console boats between 25’ and 40’. Anglers can easily deploy an outrigger’s vertical lift and horizontal rotation from the boat deck in rough seas. Additionally, the GS-390 comes equipped with our secure pin-locking technology and pairs well with TACO’s Deluxe Aluminum and Carbon Fiber Tele-Outriggers. Features: Stronger gusset support and thicker arm for enhanced durability Elevation crank handle provides lift from under the T-top Allows for horizontal rotation from under the T-top Offset handle for better hand clearance Cast stainless-steel Type-316L and machined aluminum construction Strong locking head allows perfect positioning Pairs with TACO Deluxe Aluminum or Carbon Fiber Tele-Outriggers Tested and proven quality Sleek appearance 3-year limited warranty

Grand Slam 390XL Outrigger Mount TACO took all the durable, dependable features of the popular GS-380 and incorporated a more robust gusset and thicker arm to withstand the torque and pressure created when using longer outrigger poles. This base is perfect for the bigger, faster center console boats between 25’ and 40’. Anglers can easily deploy an outrigger’s vertical lift and horizontal rotation from the boat deck in rough seas. Additionally, the GS-390XL comes equipped with our secure pin-locking technology and pairs well with TACO’s Deluxe Aluminum and Carbon Fiber Tele-Outriggers. The GS-390XL has an enlongated base for tops up to 4” thick Features: Stronger gusset support and thicker arm for enhanced durability GS-390XL has an enlongated base for tops up to 4” thick Elevation crank handle provides lift from under the T-top Allows for horizontal rotation from under the T-top Offset handle for better hand clearance Cast stainless-steel Type-316L and machined aluminum construction Strong locking head allows perfect positioning Pairs with TACO Deluxe Aluminum or Carbon Fiber Tele-Outriggers Tested and proven quality Sleek appearance 3-year limited warranty

Grand Slam 390XL Mounts with 180° Handle For 25' to 50' boats with hardtops up to 4-1/2" thick, GS-390XL makes it possible to safely and easily deploy your outriggers vertical lift and horizontal rotation from the boat deck, which is valuable when in rough seas. After installing this set of mounts on your boat, the beautiful bases will streamline your boat's appearance and make you want to chase pelagic species more often. Features: Ideal for boats 25' to 50' 35º upward lift angle Use for hardtops up to 4-1/2" thick Allows for horizontal rotation from under the T-top Elevation Crank Handle provides lift from under the T-top Offset handle for better hand clearance Strong locking head for perfect positioning Cast-stainless-steel and machined aluminum construction 3-year limited warranty *Sold as a pair