|
Single Lever Side Mount Control - Black/Chrome
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless the engine is idling
Can be installed horizontally or vertically, on the starboard or port side of the boat
Provided with a brake tension release system adjustable from outside
Pull-out handle disengages shift for warm-up Neutral safety switch X12 - 34543 Q (optional) prevents in-gear starting
Exceeds EN ISO 11547 standards when X12 safety switch is installed
|
444.28 |
|
|
Single Lever Top Mount Control w/Neutral Lock & Trim Switch - Black
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
515.33 |
|
|
Single Lever Top Mount Control w/Neutral Lock & Trim Switch - Chrome
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
515.33 |
|
|
Single Lever Top Mount Control w/Neutral Lock - No Trim Switch - Black
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
449.68 |
|
|
Single Lever Top Mount Control w/Neutral Lock - No Trim Switch - Chrome
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
442.22 |
|
|
Twin Lever Top Mount Control w/Neutral Lock & Trim Switch - Chrome
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
903.79 |
|
|
Twin Lever Top Mount Control w/Neutral Lock - No Trim Switch - Chrome
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
715.24 |
|
|
Twin Lever Top Mount Control w/Neutral Lock & Trim Switch - Black
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
899.04 |
|
|
Twin Lever Top Mount Control w/Neutral Lock - No Trim Switch - Black
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
771.35 |
|
|
Lenco Automatic Trim Tab Control System
A real automatic boat control/trim tab control system that actually works - completely and automatically! The Auto Glide system controls your trim tabs from the time you leave your dock until you come home again. The Auto Glide uses engine data and GPS data (depending on your installation method) to drive your boat to the most efficient running angle by adjusting your Lenco trim tabs as needed. This optimum running angle is determined during the set-up process after the installation of your Auto Glide system.
Closeouts Rebates Remanufactured Specials
|
|
|
Bait Caster / Spinning Rod Holder
Holds a bait caster reel in a cushioned cradle.A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in holder with a soft latching strap which snaps over the top.
Includes No. 241 combination deck or side mount.
WARNING: This product can expose you to chemicals including Diisononyl Phthalate (DINP) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.
|
19.06 |
|
|
Grabber Catch Latch - Side Mount - Black - Pull-Up Force 13N (3lbf)
Features:
Spring-loaded over-center latching
One assembly includes catch and keeper
Material and Finish: PC/ABS, black
Performance Details:
Operating temperature range: -30ºC (-20ºF) to 60ºC (140ºF)
Flammability rating: UL94-HB
Installation Notes:
Orient keeper to latch. The arrow on the keeper should point towards the cam. Mount to door and adjust for smooth latching.
Minimum distance from frame (or surface on which catch subassembly is mounted) to centerline of door hinge is 150 (5.9)
|
6.42 |
|
|
Grabber Catch Latch - Side Mount - Black - Pull-Up Force 22N (5lbf)
Features:
Spring-loaded over-center latching
One assembly includes catch and keeper
Material and Finish: PC/ABS, black
Performance Details:
Operating temperature range: -30ºC (-20ºF) to 60ºC (140ºF)
Flammability rating: UL94-HB
Installation Notes:
Orient keeper to latch. The arrow on the keeper should point towards the cam. Mount to door and adjust for smooth latching.
Minimum distance from frame (or surface on which catch subassembly is mounted) to centerline of door hinge is 150 (5.9)
|
6.42 |
|
|
No. 350 Rodmaster II
Fibre reinforced engineering nylon offers strength, resilience and reliability. Also comes with a removable gimbal pin
Includes No. 241 combination deck or side mount.
Bolting dimensions: 1 5/16" x 3 3/16"
|
19.74 |
|
|
Grabber Catch Latch - Side Mount - Black - Pull-Up Force 44N (10lbf)
Features:
Spring-loaded over-center latching
One assembly includes catch and keeper
Material and Finish: PC/ABS, black
Performance Details:
Operating temperature range: -30ºC (-20ºF) to 60ºC (140ºF)
Flammability rating: UL94-HB
Installation Notes:
Orient keeper to latch. The arrow on the keeper should point towards the cam. Mount to door and adjust for smooth latching.
Minimum distance from frame (or surface on which catch subassembly is mounted) to centerline of door hinge is 150 (5.9)
|
6.42 |
|