|
Lenco Automatic Trim Tab Control System
A real automatic boat control/trim tab control system that actually works - completely and automatically! The Auto Glide system controls your trim tabs from the time you leave your dock until you come home again. The Auto Glide uses engine data and GPS data (depending on your installation method) to drive your boat to the most efficient running angle by adjusting your Lenco trim tabs as needed. This optimum running angle is determined during the set-up process after the installation of your Auto Glide system.
Closeouts Rebates Remanufactured Specials
|
|
|
Johnson/Evinrude Outboard Relay - 12V 30A
Johnson/Evinrude outboard relay that will fit BRP-OMC.
Replaces:
BRP-OMC 582195
BRP-OMC 582472
BRP-OMC 582473
BRP-OMC 584416
BRP-OMC 586147
BRP-OMC 586244
BRP-OMC 3857533
BRP-OMC 586224
SIERRA 18-5705
*ARCO Assurance 12-month part and labor warranty protection
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
16.46 |
|
|
Johnson/Evinrude Outboard Starter - 10 Tooth
The outboard starter will fit BRP-OMC, V6, V8 loop, 115-300 HP E-TEC, and 10-tooth drive gear.
ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.
Features:
Dynamically tested and packaged for out-of-the-box performance
Nickel-coated and epoxy-painted to reduce corrosion
Sealed to minimize water intrusion
Designed for long life and optimum performance
Armatures are tested to withstand 50 times operating voltages (12 volts)
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
BRP-OMC 391511
BRP-OMC 396235
BRP-OMC 397023
BRP-OMC 584799
BRP-OMC 586289
BRP-OMC 586411
BRP-OMC 586731
BRP-OMC 586890
BRP-OMC 586897
BRP-OMC 586957
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
187.92 |
|
|
Replacement Johnson/Evinrude Tilt Trim Motor - 2-Wire, 4 Bolt, Flat Blade Shaft
Replacement outboard tilt trim motor that will fit BRP-OMC, 60, 70, 90, 115, 150, 175 HP. 1991-Up 200, 225 HP, 1991-94 120, 140 HP, 1995-UP 50 HP 3-cyl, 60 HP, V4 130 HP, 1997-Up 115-200 HP, 1998-99 225 HP, 2-wire connection, 4-bolt mount, Flat-blade shaft, Female Spade Terminal Ends.
ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.
Features:
Tilt trim motors are dynamically tested to ensure out-of-the-box performance
Motor shafts induction case hardened at bearing surfaces for superior wear resistance
Epoxy Powder coated for maximum insulation protection
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
BRP-OMC Tilt Trim Motor 434495
BRP-OMC Tilt Trim Motor 434496
BRP-OMC Tilt Trim Motor 438529
BRP-OMC Tilt Trim Motor 438531
BRP-OMC Tilt Trim Motor 5005374
BRP-OMC Tilt Trim Motor 5005376
SIERRA Tilt Trim Motor 18-6780
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
174.08 |
|
|
Johnson/Evinrude Outboard Starter - 9 Tooth (Early Model)
The outboard starter will fit BRP-OMC 55-75 HP, 3-cyl, 9-tooth drive gear.
ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.
Features:
Dynamically tested and packaged for out-of-the-box performance
Nickel-coated and epoxy-painted to reduce corrosion
Sealed to minimize water intrusion
Designed for long life and optimum performance
Armatures are tested to withstand 50 times operating voltages (12 volts)
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
BRP-OMC 383691
BRP-OMC 384777
BRP-OMC 386657
BRP-OMC 391735
BRP-OMC 585050
BRP-OMC 585058
BRP-OMC 585197
BRP-OMC 586281
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
173.23 |
|
|
Johnson/Evinrude Outboard Starter - Small 10 Tooth
The outboard starter will fit BRP-OMC, 85-140 HP V4, and a small 10-tooth drive gear.
ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.
Features:
Dynamically tested and packaged for out-of-the-box performance
Nickel-coated and epoxy-painted to reduce corrosion
Sealed to minimize water intrusion
Designed for long life and optimum performance
Armatures are tested to withstand 50 times operating voltages (12 volts)
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
BRP-OMC 385529
BRP-OMC 389954
BRP-OMC 585051
BRP-OMC 585057
BRP-OMC 586283
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
143.94 |
|
|
Johnson/Evinrude Outboard Starter - V6 - 8 Tooth
The outboard starter will fit BRP-OMC, 150-235 HP V6, and 8-tooth drive gear.
ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.
Features:
Dynamically tested and packaged for out-of-the-box performance
Nickel-coated and/or epoxy-painted to reduce corrosion
Sealed to minimize water intrusion
Designed for long life and optimum performance
Armatures are tested to withstand 50 times operating voltages (12 volts)
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
BRP-OMC 387094
BRP-OMC 395207
BRP-OMC 585062
BRP-OMC 586288
BRP-OMC 778992
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
162.92 |
|
|
Replacement Outboard Tilt Trim Motor - Johnson/Evinrude, 2-Wire, 4 Bolt, EFI
Replacement outboard tilt trim motor that will fit BRP-OMC 1998-Up, 75 HP-250 HP FFI Outboard Engines, 4-bolt mount, Female Sealed Terminal Ends, Includes O-ring.
ARCO advises cleaning all connections: A corroded connection creates resistance, lowering the amperage required to operate the motor.
Features:
Tilt trim motors are dynamically tested to ensure out-of-the-box performance
Motor shafts induction case hardened at bearing surfaces for superior wear resistance
Epoxy Powder coated for maximum insulation protection
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
BRP-OMC Tilt Trim Motor 438786
BRP-OMC Tilt Trim Motor 439937
BRP-OMC Tilt Trim Motor 5005254
SIERRA Tilt Trim Motor 18-6281
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
177.83 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 6'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
41.18 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 10'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
45.60 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 12'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
47.81 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 14'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
50.03 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 16'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
52.24 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 18'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
54.44 |
|
|
MACH™ Series High Efficiency & Flexibility Engine Control Cable - Johnson/Evinrude/OMC - 22'
MACH14 - Current BRP® (OMC®) style (like C14)
MACH14 Stroke: 75 mm (3”). For BRP® - Evinrude® (OMC®) engines manufactured from 1979 to date. Blue color jacket designed for high performance applications
For the ultimate in efficiency and response, the Mach Series cables deliver unmatched results. They have been specifically designed to make even the most complex of cable installations result in smooth, easy and precise shift and throttle movement.
Using a stranded wire core with lubricated extrusion, the Mach cables are an ideal solution for applications with long cable runs, tight bends, or where easy and precise throttle response is required.
Mach Series cables also feature solid stainless steel output fittings.
The “high performance” MACH™ Cables are the result of our decades of experience in producing high quality, long lasting, flexible cables.
The innovative core design maximizes efficiency and minimizes lost motion, while the exclusive design of the conduit provides extremely high level of flexibility.
Features:
Suitable for outboard – inboard and sterndrive engines
High efficiency for smooth operation
High flexibility for reduced bend radius
Ideal for long complex cable routing
Maintenance free
Stainless steel cables end fittings
Blue outer jacket resists against abrasion, UV and chemicals
|
58.88 |
|