|
Single Lever Top Mount Control w/Neutral Lock & Trim Switch - Black
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
515.33 |
|
|
Single Lever Top Mount Control w/Neutral Lock & Trim Switch - Chrome
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
515.33 |
|
|
Single Lever Top Mount Control w/Neutral Lock - No Trim Switch - Black
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
449.68 |
|
|
Single Lever Top Mount Control w/Neutral Lock - No Trim Switch - Chrome
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
442.22 |
|
|
Twin Lever Top Mount Control w/Neutral Lock & Trim Switch - Black
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
899.04 |
|
|
Twin Lever Top Mount Control w/Neutral Lock & Trim Switch - Chrome
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
903.79 |
|
|
Twin Lever Top Mount Control w/Neutral Lock - No Trim Switch - Black
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
771.35 |
|
|
Twin Lever Top Mount Control w/Neutral Lock - No Trim Switch - Chrome
In the twin engine installation a single switch will operate both trims. With a focus on efficiency these controls have been specifically designed to improve the functionality of control systems, making the boat easier to control. Single lever / dual action control to operate both with throttle and shift. Suitable for any type of boats with outboard, inboard or I/O power plants.
Features:
Enables easy and safe shifting by preventing accidental gear engagement unless engine is idling
Chrome plated high resistance ABS housing control with die cast chrome plated levers
Push in button disengages shift for warm-up
X12 neutral safety switch which prevents in-gear starting (optional)
Exceeds EN ISO 11547 standards when X12 safety switch is installed
For use with all Ultraflex control cables except C4:
C14 and MACH14 cables require no kit
for C2, C8 and MACHZero cables the connection kit K59 - 40144C is included
C5, C16 and MACH5 cables require K60 Kit - 40145E
C36 and MACH36 cables require K62 Kit - 40157J
C22 cable requires K61 Kit - 40146G
|
715.24 |
|
|
TigerShark I LineRigger® Electric Top Mount Outrigger Holders f/1-1/2" Poles - Pair
Designed for Hard or Soft T-Tops
Finally the first top mount outrigger holder that is electronically operational right at your console. This is a one-man operation to deploy, raise, lower and retrieve your outriggers with a simple push of a switch. Crafted of marine aluminum, highly polished and Anodized for years of service.
Package included 2 - 12' wire harnesses and one dual rocker switch panel
Features:
The simplicity of pressing a switch and you're fishing!
The TigerShark I LineRigger® is the first electronically operated top mount outrigger holder offered in the market
Meticulous engineering provides exact electronic deployment of your outriggers from your console
The powerful 12V motor drive allows for the total deployment and/or adjustment by simply pressing the switch up for deploying or pressing the switch down for retrieval of your outriggers
Fits all prepared t-tops with 3" Mounting Hole
Mounting Plate Size: 4" W x 6" L
Includes 12' of wire from each holder
Units are supplied with a standard dual rocker switch panel
When activated simultaneously, it raises and deploys your outriggers to the fishing position
Convenience, craftsmanship, quality and performance will make the TigerShark a top selection for the sports-fisherman
|
2186.95 |
|
|
Grand Slam 400 Outrigger Top Mount - Pair
TACO Marinenow offers a higher performance outrigger mount with their 400 series specifically designed for boat lengths surpassing 50’ and quad engines exceeding 1600 horsepower. The center console market continues to grow and so does the size of its vessels and the engines that power them. The new GS-400 provides the upgrade in strength to easily handle the increasing outrigger pole lengths in both Aluminum and Carbon Fiber for up to 30’. Experience the difference with this new high performance series of outrigger mounts.
Features and Benefits
Increased surface area on the hard top plate
Increased thickness of the 6" x 8" oval hard top plate to 3/4" to reduce flex
Larger top tube with longer bearing surface for improved stability
Extended upper casting to prevent tube buckling
Compatible with TACO Marine aluminum and carbon fiber poles (1-1/2" diameter)
Ideal for use on high performance boats with 3, 4 or 5 engines
Double the amount of top assembly hardware compared to Grand Slam 280 series
Stainless lever grip for additional strength
New mushroom outrigger twist and lock pin for one hand operation
Eight bolt pattern attachment for increased arm and pole support
Increased thickness in the backing plate to 1/2"
Uses same bolt and hole pattern for installation as current Grand Slam series
Sold in Pairs
Three year limited warranty
|
3047.49 |
|
|
Top Mount Inboard Starter with Gear Reduction - Counter Clockwise Rotation
Top mount inboard starter that fits 6.0L GM Engines.
ARCO advises using a fully charged battery - A weak battery can damage the starter and starter solenoid. And to also clean all connections - A corroded connection creates resistance, lowering the amperage required for an efficient starting circuit.
Features:
Dynamically tested and packaged for out-of-the-box performance
Nickel-coated and/or epoxy-painted to reduce corrosion
Sealed to minimize water intrusion
Designed for long life and optimum performance
Armatures are tested to withstand 50 times operating voltages (12 volts)
Warranty Information:
When properly installed, all ARCO products are warrantied against defects in materials and workmanship for a period of 12 months for leisure use and 90 days for commercial or racing applications.
Add an extra year of warranty to your rotating electric ARCO product (Tilt/Trim Motors, Alternators, Outboard Starters, and Inboard Starters) when you register your product within 30 days of purchase. You can register your product by visiting arcomarine.com/product-registration
Replaces:
DELCO Inboard Starter 9000887
PLEASURECRAFT Inboard Starter RA122019
SIERRA Inboard Starter 18-6443
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
189.59 |
|
|
TigerShark III LineRigger® Manual Top Mount Outrigger Holder f/1-1/2" Poles-Pair
For Hard or Soft Tops
This TigerShark series features the lowest profile under your top. Simply push the handle up to release the gears and turn 14 to 17 times for complete deployment of your outriggers to maximum bait spread. Then, simply pull the handle down and lock into place. Simultaneous up and out motion eliminates climbing the gunnels to adjust your outriggers. A simple turn of the handle does it all- total deployment and total position adjustment.
Features:
Bottom mounted crank assembly for ease of deployment
Simply push up on the handle to release the gears and turn 14 to 17 times to complete deployment of your outriggers, then simply pull handle down to lock into place
Simultaneous up and out motion eliminates climbing the gunnels to adjust your outriggers
Fits all prepared t-tops with 3" Mounting Hole
Fits Hard tops up to 2 1/2" thick
Allowing for the lowest profile under your t-top or hard top of any top mount outrigger holder in the industry
|
1889.95 |
|
|
End-Top Mounted 90°
Tube Outer Diameter:7/8"
Height:1-1/2"
Base: 6-1/2" x 1-1/2"
Material: 316 Stainless Steel
|
50.63 |
|
|
Top-Mounted Flag Pole Socket - Stainless Steel - 1" ID
Features:
316 S.S. Top Mounted Flagpole Socket
Tube I.D. - 1"
Base - 2-3/4"
Height - 2-1/8"
Fastener - #10 (3)
Includes 1/4-28 set screws (P/N 6249)
|
33.60 |
|
|
Top-Mounted Flag Pole Socket CP/Brass - 3/4" ID
Features:
CP/Brass Top Mounted Flag Pole Socket
Tube I.D. - 3/4"
Base - 2"
Height - 1-3/4"
Fastener - #6(3)
|
10.31 |
|