BURKS 22377-6.25, WET END FOR G6-1 1/2" Pump kit Only* for all G6-1-1/2 Series, 213-215JM Nema frame size only (*no motor – full sized impeller – impeller trim required). Catalog #22377-6.25 For assembly on motor with a 213JM Nema frame Motor (check motor specs.). Full size impeller is 6.25 Inches Diameter. NOTE : Impeller diameter must be trimmed to suit Horsepower or previous Impeller diameter.

Baystar Plus helm uses bearings to keep tolerances tighter, improving responsiveness and performance. Standard Baystar helm uses internal bushings. 5 turns, lock-to-lock. Adjustable stainless steel ORB O-ring fittings simplify installation and allow reorientation of fittings after installation. Anodized rear cover, anodized black port plugs. Requires 3" cut-out hole in dash.

Seal kits for Baystar and SeaStar helm pumps.

SilverSteer™ Universal Front Mount Outboard Hydraulic Steering System w/ UC128-SVS-1 Cylinder Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders. SilverSteer™ Package Kit Contains: UC128-SVS-1 Cylinder (fittings are on the face of the cylinder, between the cylinder and boat's transom)

Repair kits for Baystar hydraulic cylinders.

Seal kits for Baystar and SeaStar helm pumps.

IWAKI MD-6, PUMP POLY 35/64 100V Pump Body: GFRPP Polypropylene Impeller: GFRPP Polypropylene Ports: 35/64 Inch Hose Barb Port Connections  

SilverSteer™ Front Mount Outboard Hydraulic Steering System w/ UC130-SVS-1 Cylinder Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flats boat or tournament-style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive, and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders. UC130-SVS-1 Cylinder is ideal for applications with limited space or potential pinch-points between the cylinder and transom (i.e., when tilting the motor all the way up or motors mounted on a jack plate).  The end-mounted fittings keep the hydraulic hoses free and clear. SilverSteer™ Package Kit Contains: UC130-SVS-1 Cylinder (fittings face out from the ends of the cylinder)

Oberdorfer 3000S-6 Gear Pump  

Burks 22537-6.75 Pump Wet End Only   Please allow 3 to 4 weeks of lead time.

Formulated for Baystar and SeaStar hydraulic steering systems. Engineered with a special additive package that contains anti-foaming and anti-rust agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and water emulsification additives. Bleed hose is needed to properly bleed steering. Screws onto fluid bottle making for a clean bleed.

Formulated for Baystar and SeaStar hydraulic steering systems. Engineered with a special additive package that contains anti-foaming and anti-rust agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and water emulsification additives. Bleed hose is needed to properly bleed steering. Screws onto fluid bottle making for a clean bleed.

Formulated for Baystar and SeaStar hydraulic steering systems. Engineered with a special additive package that contains anti-foaming and anti-rust agents, anti-oxidants, viscosity stabilizers, corrosion inhibitors, wear additives and water emulsification additives. Bleed hose is needed to properly bleed steering. Screws onto fluid bottle making for a clean bleed.

Myers Pumps ME40P-1 Effluent Pump 4/10Hp 115V Myers ME40P-1 Cast Iron Effluent Pump Specifications VOLTAGE: 1ø, 115V, 60 Hz HORSEPOWER: 0.4 HP AMP DRAW (full load): 12.0 MOTOR TYPE: Permanent Split Capacitor (PSC) RPM: 1650 MAXIMUM HEAD: 32' MAXIMUM CAPACITY: 80 GPM SWITCH TYPE: Tethered Automatic MINIMUM SUMP DIAMETER: Simplex 24" Duplex 36" DISCHARGE PIPE SIZE: 1-1/2" FNPT MAXIMUM SOLIDS HANDLING SIZE: 3/4" Spherical Solids IMPELLER TYPE: Cast Iron, Two-Vane Enclosed CORD LENGTH: 10' CORD SIZE: 16-3; Type: SJTW BODY CONSTRUCTION: Cast Iron MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)

Johnson 10-35157-1 Engine Cooling Pump FEATURES Pump Body: Bronze Ports: Threaded or Hose Cam: Full or 1/2 Impeller: Neoprene Shaft Seal: 2 Lip Seals Drive: Flange Mounted to Engine.     APPLICATIONS / CHARACTERISTICS Flexible Impeller Engine Cooling Pump. Requires (2) Johnson 01-43238 Clamps to Mount.   Johnson- Engine Cooling Pump Slip-Fit Ports Full Cam F35B-9, Volvo 858065