|
Baystar Plus helm uses bearings to keep tolerances tighter, improving responsiveness and performance. Standard Baystar helm uses internal bushings. 5 turns, lock-to-lock. Adjustable stainless steel ORB O-ring fittings simplify installation and allow reorientation of fittings after installation. Anodized rear cover, anodized black port plugs. Requires 3" cut-out hole in dash.
|
541.99 |
|
|
Baystar Plus helm uses bearings to keep tolerances tighter, improving responsiveness and performance. Standard Baystar helm uses internal bushings. 5 turns, lock-to-lock. Adjustable stainless steel ORB O-ring fittings simplify installation and allow reorientation of fittings after installation. Anodized rear cover, anodized black port plugs. Requires 3" cut-out hole in dash.
|
529.99 |
|
|
HYCO 1.1T Front Mount OB Tilt Steering up to 150HP
The Hyco 1.1T With Tilt Hydraulic Steering Kit is all you need for a complete steering system. This system is used on all engines up to 150HP or less. If engine H/P exceeds 150 then the Protech packaged system must be used.
Package Kit Includes:
1-UP20T Tilt Helm Pump
UC95-OBF/1 Front mount Hydraulic Cylinder
2 quarts of Oil-15 Hydraulic Oil
Installation and Instructions manual included
*Premade Hose Kit 2' to 30' ft. length is not included and steering wheel not included.
Please Note:
There are two Cylinders offered, the UC95-OBF/3 model is for Honda BF115 and BF130 engines and Mercury Optimax 75, 90, and 115 HP engines only, and the UC95-OBF/1 is used on all other O/B models.
|
1121.46 |
|
|
2722 DualBus Plus 1/4" Stud, 5 x 10-32 Screw Terminal
Features:
Combines negative and positive buses on one block
Clear polycarbonate cover snaps on to meet Coast Guard and ABYC insulation require
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
26.40 |
|
|
BURKS 320GA5-1 1/4, Bronze Fitted Cast Iron Centrifugal Pump 230/460v
Bronze Fitted Cast Iron Construction. Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.88 Inches.
Burks end suction, three phase, close-coupled, bronze fitted, centrifugal pump with mechanical seal. They are ideal for booster service, recirculation, general water supply, and washer lines.
Construction: Casing and bracket are close grain cast iron. Enclosed 4-7/8" bronze impeller, 302 stainless steel motor shaft, single mechanical seal, carbon faces, buna elastomers, 304 stainless steel metal parts.
Connections: 1-1/2" X 1-1/4" female NPT suction and discharge Motor: 2 HP, 3450 RPM, Open drip proof, three phase, 208/230/460 volts, 60 Hz, ball bearings front and back, built-in overload protection.
Clockwise rotation, when facing back of motor. Maximum working pressure: 200 PSI Maximum inlet pressure: 70 PSI Maximum working temperature: 180 degrees Fahrenheit Carton dimension: 14" high, 12" wide, 24" long.
Please Contact us for shipping quote at http://www.clrmarine.com/Contact_Us
|
1794.60 |
|
|
1-1/4" Flush Mount Flag Pole Socket
Made from beautiful long lasting T316 polished stainless steel
Insets nearly flush to the deck
60° angle
|
28.44 |
|
|
U-Bolt ATV UTV Strap with Double Socket Arm and 1/4-20 Mounting Bolt Base
Part #: RAM-B-149Z-2-202A
RAM Rail ATV/UTV Mount for Cameras
Color:
Black Powder Coat
Material:
Powder Coated Marine Grade Aluminum
Ball Size:
1" Rubber Ball
|
46.54 |
|
|
173 2-1/4" Ball Mount for Fishfinder & Chartplotter
Features:
The Scotty 2.25″ Ball Mount enables anglers to mount larger fish finders on their watercraft
It’s designed for 10″-12″ fish finders and offers sturdy and secure holding power
Prefabricated holes on the top plate allow easy installation gimbal mount brackets that come with anglers’ fish finders
Produced using corrosion proof reinforced nylon
|
64.87 |
|
|
BURKS GNA6-1 1/4-5.00, CENTRIFGUAL PUMP ONLY BRONZE-FIT
Bronze Fitted Cast Iron Construction.
Base mounted Pump Only less Motor.
Ports are Inches NPT Inlet, Inches NPT Outlet.
UNSPSC Code: 40150000
|
1987.20 |
|
|
Bosworth 75-1 1/4 Foot/Check Vlv 1 1/4 Female
Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 1 1/4” Female Threaded Ports
|
20.36 |
|
|
BURKS 310G5-1 1/4, BURKS CIRCULATION G5 PUMP 230-440V 1HP 3PH
Centrifugal Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 1 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.25 Inches.
|
1605.60 |
|
|
BURKS 315G5-1 1/4, Centrifugal Pump 3PH 1 1/2HP 230/460v
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1-1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.75 Inches.
|
1863.90 |
|
|
BURKS 315GA5-1 1/4, Centrifugal Pump 230/460v 3PH 1 1/2HP BF
All BRONZE Construction.
Close Coupled to a 1-1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.56 Inches.
|
1788.30 |
|
|
BURKS 320G6-1 1/4, CENTRIFUGAL PUMP 230/460v 3PH 2HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.13 Inches
|
2059.20 |
|
|
BURKS 330GA6-1 1/4, Centrifugal Pump 230/460v 3PH 3HP
Bronze Fitted Cast Iron Construction. Close Coupled to a 3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.5 Inches.
|
2183.40 |
|