|
Adjustable stainless steel ORB O-ring fittings simplify installation and allow simple reorientation of fittings after installation. Anodized rear cover, anodized black port plugs. Designed specifically for SeaStar hydraulic steering systems.
|
713.99 |
|
|
UP28R Rear Mount Helm 1.7 cu. 3/4" Tapered Stainless Steel Shaft
Features:
Available in four different displacement sizes
Compact design
Ball bearing piston race
Built-in lock valve for positive rudder lock
Integral relief valve for over-pressure protection
3/4” tapered stainless steel shaft
Easily accessible lock valve and shaft seal for replacement
Cast iron cylinder rotor for greater durability and longer life
1/4" NPT fitting for 3/8" tube
Includes 90° adjustable fittings for 3/8” tube and white bezel
UP45R pump is ideal for double cylinder outboard applications
UP45 pump is available also for inboard application
X68 (optional) - 40894Z Chrome bezel
KITF (optional) - 39664Y Remote fill adapter
Specifications:
Mounting: Retro-cruscotto
Displacement/Revolution: 28 cc-1.7 cu in
# of Pistons: 5
Relief Valve Setting: 70 Bar - 1000 PSI
Maximum Wheel Diameter: 710mm - 28"
Weight: 5kg - 11 lbs.
|
712.76 |
|
|
HYCO 1.1T Front Mount OB Tilt Steering up to 150HP
The Hyco 1.1T With Tilt Hydraulic Steering Kit is all you need for a complete steering system. This system is used on all engines up to 150HP or less. If engine H/P exceeds 150 then the Protech packaged system must be used.
Package Kit Includes:
1-UP20T Tilt Helm Pump
UC95-OBF/1 Front mount Hydraulic Cylinder
2 quarts of Oil-15 Hydraulic Oil
Installation and Instructions manual included
*Premade Hose Kit 2' to 30' ft. length is not included and steering wheel not included.
Please Note:
There are two Cylinders offered, the UC95-OBF/3 model is for Honda BF115 and BF130 engines and Mercury Optimax 75, 90, and 115 HP engines only, and the UC95-OBF/1 is used on all other O/B models.
|
1121.46 |
|
|
Gear Pump 3/4" NPT Ports - 12V
Positive Displacement Gear Pump
The Concept:
Made in the USA GROCO Gear Pumps are self-priming, instantly reversible, and are capable of operation in either direction. Relatively low flow (less than vane pumps) makes them suitable for duties such as deck-wash, fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor, #316 stainless steel shaft, and are available in models that provide reversing (R), remote reversing (RR), and reversing with touchpad (RT) control options.
Featuring:
Self Priming: Yes
Thread NPT: 3/8"
Control Type: None
Max GPM: 3
Breaker DC: 25 Amp
|
392.66 |
|
|
Reversing Gear Pump 3/4" NPT Ports - 12V
Positive Displacement Reversing Gear Pump
The Concept:
Made in the USA GROCO Gear Pumps are self-priming, instantly reversible, and are capable of operation in either direction. Relatively low flow (less than vane pumps) makes them suitable for duties such as deck-wash, fuel transfer, ballast transfer, and oil change. All models have an ignition protected motor, #316 stainless steel shaft, and are available in models that provide reversing (R), remote reversing (RR), and reversing with touchpad (RT) control options.
Features:
Self Priming: Yes
Thread NPT: 3/8"
Control Type: Pump Mounted Reversing Switch
Max GPM: 3
Breaker DC: 15 Amp
|
561.34 |
|
|
Oberdorfer 172B-A81 Cent Pump 12V 1/8 Hp 3/4"
FEATURES
Pump Body:
Bronze
Ports:
3/4" NPT
Flow:
13 GPM Max
Pressure:
7 PSI Max, 17 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Seals - Type 6A/68 Buna Standard, Viton Optional
Shaft:
Corrosion resistant passivated 316 SS Shaft
Motor / Drive:
TEFC Motors 1/10 HP permanent Magnet 12V, 24V, 32V DC.
Rubber base grommets for vibration dampening
1/13 HP Permanent Magnet 12V DC Motor - 172L threaded shaft style.
1/8 HP Capacitor Start 50/60 HZ, 115V & 220V AC Motors with Ignition protection, Thermal overload protection, Power cord with plug.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
Ideal for: Marine Air Conditioning, Engine Block Temperature Control, Radiator and Heat Exchanger, Circulation Baitwell Circulation.
Oberdorfer Centrifugal Pump, 12V 1/10HP Motor, 3/4"NPT Ports
|
741.56 |
|
|
Oberdorfer 172B-A81 Cent Pump 24V 1/8 Hp 3/4"
FEATURES
Pump Body:
Bronze
Ports:
3/4" NPT
Flow:
13 GPM Max
Pressure:
7 PSI Max, 17 feet of head
Impeller:
Centrifugal
Shaft Seal:
Mechanical Seals - Type 6A/68 Buna Standard, Viton Optional
Shaft:
Corrosion resistant passivated 316 SS Shaft
Motor / Drive:
TEFC Motors 1/10 HP permanent Magnet 12V, 24V, 32V DC.
Rubber base grommets for vibration dampening
1/13 HP Permanent Magnet 12V DC Motor - 172L threaded shaft style.
1/8 HP Capacitor Start 50/60 HZ, 115V & 220V AC Motors with Ignition protection, Thermal overload protection, Power cord with plug.
APPLICATIONS / CHARACTERISTICS
BRONZE CLOSE COUPLED CENTRIFUGAL PUMP
Ideal for: Marine Air Conditioning, Engine Block Temperature Control, Radiator and Heat Exchanger, Circulation Baitwell Circulation.
Oberdorfer Centrifugal Pump, 24V 1/10HP Motor, 3/4"NPT Ports
|
731.25 |
|
|
Adjustable stainless steel ORB O-ring fittings simplify installation and allow simple reorientation of fittings after installation. Anodized rear cover, anodized black port plugs. Designed specifically for SeaStar hydraulic steering systems.
|
939.99 |
|
|
Adjustable stainless steel ORB O-ring fittings simplify installation and allow simple reorientation of fittings after installation. Anodized rear cover, anodized black port plugs. Designed specifically for SeaStar hydraulic steering systems.
|
1209.99 |
|
|
Adjustable stainless steel ORB O-ring fittings simplify installation and allow simple reorientation of fittings after installation. Anodized rear cover, anodized black port plugs. Designed specifically for SeaStar hydraulic steering systems.
|
1209.99 |
|
|
Seal kits for Baystar and SeaStar helm pumps.
|
75.99 |
|
|
For use with single engine up to 350HP. Kit includes SeaStar sport tilt helm 1.7 with remote fill, pivot cylinder and two quarts of hydraulic oil. Order HO51XX hoses, sold separately.
|
2052.99 |
|
|
Seal kits for Baystar and SeaStar helm pumps.
|
16.89 |
|
|
Jabsco Flexible Impeller Pedestal Pump 3/4" Vert Port Ped Mt
FEATURES
Pump Body:
Bronze, Pedestal Mount
Port Size:
3/4" NPT Internal
Flow:
Nominal 40 Litres/min (10.6 gallons/min) at 1500rpm
Impeller:
Neoprene
Shaft Seal:
Carbon-Ceramic Face Type
Shaft:
Stainless Steel
APPLICATIONS / CHARACTERISTICS
Marine Engine Cooling, Circulating, Pumping Bilges, Transfers, Washdowns, Sump Drainage, Spill Returns.
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 2.4m (7.8ft).
Jabsco Flexible Impeller Pedestal Pump, 3/4" NPT Ports, 1/2" Diameter Shaft with 1/8" Key, Neoprene Impeller
|
735.59 |
|
|
Oberdorfer N1000 Series Gear Pump
FEATURES
Pump Body:
Bronze
Ports:
1/4" NPT
Flow:
2.1 GPM Max
Pressure:
150 PSI Max
Bearings:
Heavy Duty Carbon Bearings (Self Lubricating)
Gears:
Special Cast Bronze Helical Gears
Shaft Seal:
Formed Ring Seal Packing Standard. Optional Lip Seals or Mechanical Seals in Buna or Viton.
Shaft:
Stainless Steel Shafts
Motor / Drive:
Either direct drive with flexible coupling or pulley drive can be used. We have many motor options and can assemble for you.
APPLICATIONS / CHARACTERISTICS
BRONZE PEDESTAL MOUNT ROTARY GEAR PUMPS
Service life will be increased substantially if the liquid pumped is clean and has some degree of lubricity. Liquids compatible with bronze and stainless steel can be pumped providing proper seal has been specified. Close tolerances and the positive pumping action make the rotary gear pump capable of lifting water on the suction side as high as 20 feet.
Oberdorfer Gear Pump, Bronze, 1/4"NPT Ports, Buna Lip Seal
|
376.35 |
|