|
Adjustable stainless steel ORB O-ring fittings simplify installation and allow simple reorientation of fittings after installation. Anodized rear cover, anodized black port plugs. Designed specifically for SeaStar hydraulic steering systems.
|
939.99 |
|
|
Seal kits for Baystar and SeaStar helm pumps.
|
75.99 |
|
|
Marine Grade Electrical Wire Seal - Round Cable, 4/0 AWG, 1" NPT
Liquid Tight Wire Seals provide low cost watertight cabl e entries into panels and junction boxes. UL and CSA approved to work with round and flat cable. Resistant to saltwater, gasoline, alcohol, ketones and mineral oil. Safe underwater to 300ft. (150 PSIG).
Features:
Round Cable
AWG Range: 4/0+
Min/Max: .71-.98
Clearance Hole: 1.35
NPT Size: 1"
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
11.58 |
|
|
SilverSteer™ 2.0 High-Performance Front Mount Outboard Hydraulic Steering System - 1500PSI FM V2
Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.
Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.
Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.
Features:
Horsepower: Single engine, 350hp, dual engine, 600hp
Helm: 7.3 cu in/120cc
Hose: 1,500psi
Turns Lock-to-Lock: 4.3
Included Equipment: UP25 F-SVS front mount helm pump, UC128/2-SVS front mount outboard cylinder, hydraulic oil (two qts.), Hose kits sold separately
Steering Wheel: Sold separately
Steering Wheel Shaft: 3/4" tapered
Warranty: Two years
|
1199.34 |
|
|
Adjustable stainless steel ORB O-ring fittings simplify installation and allow simple reorientation of fittings after installation. Anodized rear cover, anodized black port plugs. Designed specifically for SeaStar hydraulic steering systems.
|
713.99 |
|
|
PROTECH 2.1 Front Mount OB Hydraulic System - Includes UP28 FM Helm, Oil & UC128-TS/2 Cylinder - No Hoses
Durability and performance define the Protech front mount outboard steering package. From the stainless steel helm shaft, heavy duty shaft seals, carbon steel piston and 304 electropolished and passivated stainless link assemblies, the Protech is built for maximum longevity and peak performance. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.
Kit Contains:
UP28 F Front mount helm pump
UC128-TS/2 Cylinder Front mount outboard cylinder
OIL 15 Hydraulic oil - 2 quarts
The wheel is not included
|
1133.83 |
|
|
Seal kits for Baystar and SeaStar helm pumps.
|
16.89 |
|
|
Baystar Plus helm uses bearings to keep tolerances tighter, improving responsiveness and performance. Standard Baystar helm uses internal bushings. 5 turns, lock-to-lock. Adjustable stainless steel ORB O-ring fittings simplify installation and allow reorientation of fittings after installation. Anodized rear cover, anodized black port plugs. Requires 3" cut-out hole in dash.
|
529.99 |
|
|
Specifically designed to be used on smaller commercial fishing vessels. Features stainless steel shaft, heavy duty shaft seal and wiper. Shaft and seal help protect the pump from the abrasive effects of sediment that is brought on board by the operator handling traps or pots. 1000 PSI relief valve setting. Adjustable stainless steel ORB O-ring fittings simplify installation and allow simple reorientation of fittings after installation. Anodized rear cover, anodized black port plugs.
|
1135.99 |
|
|
Baystar Plus helm uses bearings to keep tolerances tighter, improving responsiveness and performance. Standard Baystar helm uses internal bushings. 5 turns, lock-to-lock. Adjustable stainless steel ORB O-ring fittings simplify installation and allow reorientation of fittings after installation. Anodized rear cover, anodized black port plugs. Requires 3" cut-out hole in dash.
|
541.99 |
|
|
Minor Repair Kit for Sherwood D-60
This kit contains the following items
SH 10609
2
GASKET
SH 10927
1
SEAL/SEAT ASSEMBLY
SH 9959K
2
IMPELLER KIT
This kit is put together at time of order.
|
129.69 |
|
|
Minor Repair Kit for Sherwood D-75
This kit contains the following items
SH 10609
2
GASKET
SH 10927
1
SEAL/SEAT ASSEMBLY
SH 9959K
2
IMPELLER KIT
This kit is put together at time of order.
|
129.69 |
|
|
Minor Repair Kit for Sherwood D-65
This kit contains the following items
SH 10609
2
GASKET
SH 10927
1
SEAL/SEAT ASSEMBLY
SH 9959K
2
IMPELLER KIT
This kit is put together at time of order.
|
129.69 |
|
|
Gianneschi SUPER LARIO 2 Bronze Hand Pump 1"
Gianneschi SUPER-LARIO-3, SUPER LARIO 3 Self Priming Double Acting Piston Pump, rated for 9.2 GPM, Bronze construction, Bronze impeller. Inlet Port is 1 Inch, Discharge Port is 1 Inch.
Applications for the SUPERLARIO3 include pumping aggressive liquids, bilge emptying, tanks, diesel oil intake, oil transfer.
|
2540.79 |
|
|
Bosworth 1.5 Aluminum Inlet Aluminum Fitting 1.5Npt
|
93.55 |
|