|
Hydraulic Hose Kit 6' - Pair
Two high pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.
Fittings: ORFS
*Not recommended for use with SilverSteer™ Series cylinders.
|
138.85 |
|
|
Hydraulic Hose Kit 2' - Pair
Two high pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.
Fittings: ORFS
*Not recommended for use with SilverSteer™ Series cylinders.
|
132.44 |
|
|
Hydraulic Hose Kit 4' - Pair
Two high pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.
Fittings: ORFS
*Not recommended for use with SilverSteer™ Series cylinders.
|
132.44 |
|
|
Hydraulic Hose Kit 3' - Pair
Two high-pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.
Specifications:
Length: 3 ft.
Fittings: ORFS
*Not recommended for use with SilverSteer™ Series cylinders.
|
132.44 |
|
|
Hydraulic Hose Kit 6' - Two Hoses with Bulkhead Fittings
Two high-pressure flexible hoses with pre-crimped nickel-plated fittings, bulkhead fittings (for KIT OB-BHBR only), and bend restrictors on one end.
Application:
Recommended for use with all Uflex helms with 1500 psi relief valves
Specification:
Hose Length (feet): 6’
|
174.08 |
|
|
XPS Hose Kit - 6'
This Panther hose kit is needed for the Panther XPS System.
Features:
The low-pressure hose is 12 in. longer to allow for uninterrupted travel when connected to the cylinder actuator
6 ft. – 1/4 in. Hi-Pressure Hose
7 ft. – 5/16 in. Return Hose
Includes:
Contains two hoses high pressure and low pressure—with fittings
|
93.96 |
|
|
SilverSteer™ 2.0 High-Performance Front Mount Outboard Hydraulic Steering System - 1500PSI FM V2
Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.
Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.
Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.
Features:
Horsepower: Single engine, 350hp, dual engine, 600hp
Helm: 7.3 cu in/120cc
Hose: 1,500psi
Turns Lock-to-Lock: 4.3
Included Equipment: UP25 F-SVS front mount helm pump, UC128/2-SVS front mount outboard cylinder, hydraulic oil (two qts.), Hose kits sold separately
Steering Wheel: Sold separately
Steering Wheel Shaft: 3/4" tapered
Warranty: Two years
|
1199.34 |
|
|
BURKS 20158-6, REPAIR KIT FOR CT6M
Repair Kit for All CT6M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Impeller Locknut, and instructions.
|
1313.76 |
|
|
BURKS 20522-6, Repair Kit for All CS6M Series Pumps
Repair Kit for All CS6M Series Pumps. Kit Includes: Impeller, Raceway, Shaft Seal, O-Ring Gasket, Suction Sleeve, Raceway Screws, Impeller Locknut, Shaft Key and instructions.
|
1332.12 |
|
|
Hypro 9910-Kit-1734, Repair Kit
|
242.32 |
|
|
Gianneschi PM50 REPAIR KIT Pm50 Repair Kit Kpm5001
|
86.36 |
|
|
Gianneschi PM40 REPAIR KIT PM40 Repair Kit
|
86.36 |
|
|
GoTech™ 1.0 Universal Front Mount Outboard Hydraulic Steering System
For outboard single engine up to 115hp.
Kit Contains:
UP18 - Intermediate helm pump
UC81-OBF - Front mount outboard cylinder
OL 150 - Hydraulic oil - 2 litres
KIT OB-GT-60 - Hose kit dia, 1/4" 6M(19.7") length
|
903.55 |
|
|
SilverSteer™ Universal Front Mount Outboard Hydraulic Tilt Steering System - 1500PSI V1
Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion.
Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering.
Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders.
SilverSteer™ Package Kit Contains:
UC130/1-SVS Cylinder
UP25F-SVS Helm
2 Quarts of Hydraulic Oil
|
1670.20 |
|
|
Steer Stop Outboard Hydraulic Steering Lock Set - 4"
T-H Marine developed the first steering stop available for outboard motors and now we've revised that design so it stands apart from imitation and performs better than any other on the market.
With our 4" Steer Stop Outboard Hydraulic Steering Lock in place, boaters can center their outboard motor equipped with hydraulic steering and keep it from wandering when trailering. Similar to the original Steer Stop, units clip onto hydraulic steering rams on either side of outboard to keep engine straight and prevent damage to motor supports. The cord then keeps units together when stowed and aids removal.
Additionally, with the new grip built into the design, it is easier than ever to install and remove the Steer Stop Outboard Hydraulic Steering Lock, saving you effort and wear and tear on your hands.
Features:
Must-know information about the 4" Steer Stop Outboard Hydraulic Steering Lock:
Locks hydraulic steering when trailering
Fits most steering cylinder rods on outboard engines
Snaps over outboards hydraulic steering cylinder rods
Helps keep engine centered during transport
Protects steering system, outboard, and motor supports
Includes cord to connect units for storage and to aid in removal
Grip makes it even simpler and easier to put on and take off
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
17.51 |
|