Cable Buddy Cable Buddy™ is a complete steering cable lubricant system.Seals moisture out, puts lubricant in. Prevents corrosion and freezing to -40°F (-40°C). Cable Buddy lubricates and virtually eliminates all wear in the inner cable, where most problems occur. Works on inboard, outboards, and inboard/outboard steering cables. Fits all major US and foreign motors (7/8" x 14 pitch threads). Easy to install. Includes the stainless steel Cable Buddy Nut with plug and sealing washer, oiling tube assembly, and Max-Lube, the ideal lubricant for steering cables. Cable Buddy comes with 1 lube nut and Max-Lube.

Steer Stop Outboard Hydraulic Steering Lock Set - 4" T-H Marine developed the first steering stop available for outboard motors and now we've revised that design so it stands apart from imitation and performs better than any other on the market.  With our 4" Steer Stop Outboard Hydraulic Steering Lock in place, boaters can center their outboard motor equipped with hydraulic steering and keep it from wandering when trailering. Similar to the original Steer Stop, units clip onto hydraulic steering rams on either side of outboard to keep engine straight and prevent damage to motor supports. The cord then keeps units together when stowed and aids removal. Additionally, with the new grip built into the design, it is easier than ever to install and remove the Steer Stop Outboard Hydraulic Steering Lock, saving you effort and wear and tear on your hands. Features: Must-know information about the 4" Steer Stop Outboard Hydraulic Steering Lock: Locks hydraulic steering when trailering Fits most steering cylinder rods on outboard engines Snaps over outboards hydraulic steering cylinder rods Helps keep engine centered during transport Protects steering system, outboard, and motor supports Includes cord to connect units for storage and to aid in removal Grip makes it even simpler and easier to put on and take off WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

GoTech™ 1.0 Universal Front Mount Outboard Hydraulic Steering System For outboard single engine up to 115hp. Kit Contains: UP18 - Intermediate helm pump UC81-OBF - Front mount outboard cylinder OL 150 - Hydraulic oil - 2 litres KIT OB-GT-60 - Hose kit dia, 1/4" 6M(19.7") length

SilverSteer™ 2.0 High-Performance Front Mount Outboard Hydraulic Steering System - 1500PSI FM V2 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders. Features: Horsepower: Single engine, 350hp, dual engine, 600hp Helm: 7.3 cu in/120cc Hose: 1,500psi Turns Lock-to-Lock: 4.3 Included Equipment: UP25 F-SVS front mount helm pump, UC128/2-SVS front mount outboard cylinder, hydraulic oil (two qts.), Hose kits sold separately Steering Wheel: Sold separately Steering Wheel Shaft: 3/4" tapered Warranty: Two years

SilverSteer™ Universal Front Mount Outboard Hydraulic Steering System w/ UC128-SVS-1 Cylinder Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders. SilverSteer™ Package Kit Contains: UC128-SVS-1 Cylinder (fittings are on the face of the cylinder, between the cylinder and boat's transom)

SilverSteer™ Universal Front Mount Outboard Hydraulic Tilt Steering System - 1500PSI V1 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders. SilverSteer™ Package Kit Contains: UC130/1-SVS Cylinder UP25F-SVS Helm 2 Quarts of Hydraulic Oil

SilverSteer™ Universal Front Mount Outboard Hydraulic Tilt Steering System - 1500PSI V2 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders. SilverSteer™ Package Kit Contains: UC130/2-SVS cylinder

SilverSteer™ Front Mount Outboard Hydraulic Steering System w/ UC130-SVS-1 Cylinder Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flats boat or tournament-style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive, and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders. UC130-SVS-1 Cylinder is ideal for applications with limited space or potential pinch-points between the cylinder and transom (i.e., when tilting the motor all the way up or motors mounted on a jack plate).  The end-mounted fittings keep the hydraulic hoses free and clear. SilverSteer™ Package Kit Contains: UC130-SVS-1 Cylinder (fittings face out from the ends of the cylinder)

SilverSteer™ Outboard Hydraulic Tilt Steering System - UC130 V1 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.

SilverSteer™ Front Mount Outboard Hydraulic Steering System - UC130 V2 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over tightening or leaking fittings from loosening during installation, a common problem on competing cylinders. Specifications: Volume: 130 cc - 7.93 cu.in Output force: 492 kg - 1085 lbs Inside diameter: 36 nm - 1.43" Stroke: 185 nm - 7.28" 3/8" fittings: For high pressure flex hose Bleed fittings: DN5 quick connect Kit Includes: UC130-SVS 2 UP25F-SVS 2x Oil 15

SilverSteer™ Outboard Hydraulic Tilt Steering System - UC130 V2 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.

Atlas Micro Jacker Small Outboard Hydraulic Jack - 4" SMALLEST & LIGHTEST HYDRAULIC JACK ON THE MARKET For Small Outboards - Max Weight 425 lbs / Max Horsepower 115 HP Great For Shallow Water Boats – Gheenoes     River Runners – Jon Boats - Skiffs Get Out of Trouble Fast – Lifts in 8 Seconds Lightweight – Only 23 Pounds Fish “Skinny Water” With Confidence Self Contained Hydraulics Maximum outboard dry weight: 425 pounds Maximum outboard horsepower: 115 HP* Only Four (4) Inch Setback Clamp-On Motor Adapter Available (optional) Small Footprint – Only 14-5/8” Wide and 11-1/2” High Clamp-On Motor Adapter (part # AHJM-CMA-DP) allows you to mount smaller engines with clamp-on brackets to the ATLAS Micro Jacker, since they do not mount with bolts on the standard BIA engine hole pattern. Adjustment Specifications: With the Micro Jacker in place, you will have about 8.5” to work with in height. This includes 1.5” of adjustment at the transom, another 1.0” on the motor side, 1.0" of adjustment with the motor, and 5" of hydraulic lift with the Micro Jacker itself. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Lowrance Outboard Cable-Steer Pilot Pack Everything you need in one box to fit an autopilot to your outboard motor, the Outboard Pilot lets you focus on fishing activity while keeping the boat on course. When connected to a Lowrance HDS Gen2 or Gen2 Touch, the Outboard Pilot can steer to a waypoint or along a route, select a turn pattern or simply hold a constant heading. The Lowrance SmartSteer™ user interface allows you to easily switch between electric-steer, trolling-motor control and outboard motor control directly from your HDS display. And, with your HDS display, you can easily convert trails to routes - so you can retrace a previous track and get your boat back to the dock from your fishing area. HDS Units require 3.5 Software Steer your outboard motor to a heading, waypoint, route or cursor, with control from your HDS Gen2 or Gen2 Touch display Lowrance SmartSteer™ interface provides control of your cable-steered outboard motor, as well as the MotorGuide Xi5 Pinpoint electric-steer trolling motor "One-touch" route creation from trails Pre-set turn patterns for more effective fishing/trolling presentations Recommended for single-outboard setups, on boats that are 30 feet and less, in length VRF (Virtual Rudder Feedback).simplifies pilot installation eliminating the need for a rudder position sensor Easy setup.straightforward guide steps you through first-time install Easy-to-install, plug-and-socket connection with no complex terminal wiring Supported by Lowrance Advantage Service program Dash-mount button for one-touch Auto/Standby activation Steer to Heading, Course or Route High efficiency, super-quiet 0.8L hydraulic gear pump Lowrance Outboard Pilot Cable-Steer Pack replaces the manual helm-drive unit Morse 290, Morse 304411 and Teleflex SSC52 cable compatibility Helm-1 is only compatible with the NAC-1.Helm-1 includes variable-voltage feedback interface 2 Year Limited Warranty Package Includes: NAC-1 Autopilot Computer - 000-11769-001 The brains behind the Lowrance Outboard Pilot system. It contains the steering computer and electronics for the drive unit motor and clutch. Helm-1 for Outboard Pilot - 000-11771-001 This drive unit replaces your manual helm-drive unit on single cable installations. Compatible with Morse 290, 304411 and Teleflex SSC52 cables. Includes voltage rudder-feedback sensor, and is only compatible with NAC-1. N2K 4 Way - 000-10996-001 NMEA2000 4-way joiner. Connect four NMEA2000 Micro-C devices to the NMEA2000 Network. N2KEXT-2RD - 000-0119-88 0.6M (2') NMEA 2000® cable for backbone extension or or drop cable to connect an additional network device N2KEXT-6RD - 000-0127-53 1.82M (6') NMEA 2000® cable for backbone extension or drop cable to connect an additional network device N2KEXT-15RD - 000-0119-86 4.55M (15') NMEA 2000® cable for backbone extension or or drop cable to connect an additional network device TR-120-KIT - 000-0127-52 Set of 1 male and 1 female NMEA 2000® terminators MICRO-C POWER CABLE ONLY - NO T CONN - 000-12202-001

NAC-1 Outboard Hydraulic Autopilot Pack Features: Easy to Install, available for both Hydraulic and Cable steer systems Dash-mount button for one-touch Auto/Standby activation Steer to Heading, Course, or Route Automatic Turn Patters NAC-1 Plug & Socket connectors – no screw terminals or wire stripping necessary High efficiency, super-quiet 0.8L hydraulic gear pump (Pump-1 MKII) Add a second Helm station to a boat using the MFD Power steer commands – no need for additional hydraulics + steering wheel In the Box: Point-1 AP Heading and GPS Sensor 000-12930-002 NAC-1 Autopilot Computer 000-11769-001 PUMP-1 MKII – 0.8L reversible hydraulic pump 000-11770-002 Hydraulic fitting kit 000-15942-001 Standby-Auto button 000-13703-001 Micro-C Network Components:  N2KEXT-2RD,CABLE,MICRO-C, 0,6M - 000-0119-88 N2KEXT-6RD,CABLE,MICRO-C, 1,8M - 000-0127-53 N2KEXT-15RD,CABLE,MICRO-C, 4,5M - 000-0119-86 TR-120-KIT - 000-0127-52 MICRO-C POWER CABLE ONLY - NO T CONN - 000-12202-001  N2K,MICRO-C,4-WAY BLOCK (22AWG)  - 000-12612-001

NAC-D Autopilot Computer for Steer By Wire NAC-D is a steer-by-wire autopilot solution for Electronic Vessel Control Systems (steering systems with a digital interface). With NAC -D, boaters with SeaStar® Optimus®, Yanmar® VC10/JC10, Volvo® IPS/EVC or Yamaha® helm master/single-engine control systems can benefit from all the full features and performance of Simrad® autopilots. Easy to install Requires only the connection of two Micro-C connectors – there is no requirement for an additional hydraulic pump, rudder sensor installation, or dockside rudder calibration. This saves boaters time and money. Automatic switching Featuring Continuum® steering and support for the SteadySteer™, the NAC -D allows automatic switching between two-speed profiles delivering optimal steering performance at both low and high speeds. Flexible choice Choose the controller to suit your preference from dedicated controllers like the AP™ 44 or AP 48. Simrad® autopilot systems incorporate state-of-the-art electronics and represent over 70 years of experience and development. Simrad® autopilots can reduce your workload and fatigue and improve your situational awareness and safety, helping you arrive fresher at your destination. Features SeaStar Solutions®, Volvo®, Yanmar® and Yamaha® approved control system interface Control via AP™ 44, AP 48 No need for an additional hydraulic pump, rudder sensor, or dockside calibration SteadySteer™ feature included Steer to a waypoint, heading, or set turn pattern, such as a U-turn, Spiral turn, and many more – the NAC™ -D can even initiate a zigzag turn CAN-bus data connectivity - connection to Optimus® steering systems via the CAN-bus data network