Pro Rack features patented NFB technology and twin cables to handle the steering loads in single non-power assisted outboards with top speeds above 50 MPH. Back mount design for easy installation. Fits the standard SeaStar Rack & Pinion cutout, so no dash modifications required when upgrading an existing rack system. Fits boats to 24'. Standard 3/4" tapered steering shaft. Stainless steel telescopic ram. Wheel not included.

Pro Rack features patented NFB technology and twin cables to handle the steering loads in single non-power assisted outboards with top speeds above 50 MPH. Back mount design for easy installation. Fits the standard SeaStar Rack & Pinion cutout, so no dash modifications required when upgrading an existing rack system. Fits boats to 24'. Standard 3/4" tapered steering shaft. Stainless steel telescopic ram. Wheel not included.

Pro Rack features patented NFB technology and twin cables to handle the steering loads in single non-power assisted outboards with top speeds above 50 MPH. Back mount design for easy installation. Fits the standard SeaStar Rack & Pinion cutout, so no dash modifications required when upgrading an existing rack system. Fits boats to 24'. Standard 3/4" tapered steering shaft. Stainless steel telescopic ram. Wheel not included.

NFB helms are for single or dual NFB Rack systems. NFB tilt helm had 48° of adjustment in 5 - 12° increments.

For use with Adjustable Tie Bars on standard Dometic steering cylinders. Allows the consumer to take full advantage of all the features and benefits of the heavy-duty adjustable tie bar products for twin engine applications up to 600 HP. Utilizes Tournament series adjustable tie bars. High strength, forged aluminum. Eliminates need for cut-to-length traditional tie bars.

Dual Flush Pro with Gate Valve Clean your entire septic system with this reverse flush valve. Forces water backs up into plumbing lines to break up clogs in pipes. Allows you to backfill and flush black and grey water tanks, then reverse valve and flush sewer drain hose. Anti-siphon valve and complete valve assembly included. Patented. Features: A convenient way to clean the entire septic system Forces water back up into plumbing lines to break up clogs in pipes Allows to backfill and flush black and grey water tanks Anti-siphon valve and complete valve assembly included Clear, break-resistant polycarbonate adapters make it easy to see when the tank is done rinsing

9 M SILR Y Dual Side Image Transducer Adapter Cable f/HELIX  Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a transducer switch.  Y Cable - Separates Side Imaging into Left and Right Side Beams - for Side Imaging products only.  Allows the use of two side imaging transducers with one unit without the need for a transducer switch.  Used in applications where the a plastic thru the hull transducer is required on a boat with a deep V hull or the motor or other items on the transom of the boat may block one side of the transducer and distort readings.    30" length. Supports MEGA Side Imaging. WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

RAM ROD® JR Fishing Rod Holder with Dual T-Bolt Track Base The RAM ROD® Jr Fishing Rod Holder, compatible with both spinning and casting reels, is specifically designed for light-duty environments and smaller fishing rods. It features a flexible latching strap to secure the rod. A hexagonal attachment point makes the rod holder compatible with the C-Size and B-Size hex ball bases.  This configuration includes a short spline post and track base for use with the track mounting system and is compatible with the RAM® Tough-Track™. The RAM ROD® Jr is also GoPro® compatible – just attach a GoPro factory mount directly to the rod holder or use the Double Ball Mount to attach any action camera. If users want to mount a phone to utilize the mobile fishfinder app, use the Double Ball Mount with X-Grip®. Specifications: Hardware Included: Assembly Hardware; (2) 1/4"-20 x 7/8" T-Bolts; (2) 1/4"-20 Knobs Product Dimensions: 2 in. post length  Hole Pattern: 3.5 in. Materials: High-strength composite Packaging Type: Retail header card Weight: 0.89 lbs.

RAM ROD® Fishing Rod Holder with Dual T-Bolt Track Base This track mounting solution includes the high-strength composite RAM ROD® fishing rod holder, 6” spline post, and dual T-bolt track base. Compatible with the RAM® Tough-Track™ and designed to not loosen while trolling, this track base makes an excellent addition to the left side of a boat. Paired with the included spline post, easily rotate the RAM ROD® fishing rod holder 360 degrees while tilting the cradle forward and back to achieve the ideal angle. Features: Kit includes RAM ROD® fishing rod holder, 6" spline post, and dual T-bolt track base Compatible with all versions of the RAM® Tough-Track™ RAM ROD® fishing rod holder can be rotated 360 degrees and tilted to achieve the desired angle Backed by a lifetime warranty Specifications: Hardware Included: (2) 1/4"-20 x 7/8" T-Bolts; (2) 1/4"-20 Knobs Product Dimensions: 6 in. post length  T-Bolt Dimensions: 0.48 x 0.95 inches Hole Pattern: 3.5 inches Materials: High-strength composite Packaging Type: Retail bag Weight: 1.11 lbs.

Low Profile Track - Black - 4" Low Profile Track is made from corrosion proof high strength composite material that will last a lifetime. The lowest profile track on the market and a top load design allows for quick and easy setup of all your Scotty accessories. Install Scotty's Low Profile Track on your kayak, canoe, or any other watercraft. Slide the Scotty 438 Gear-Head Track Adapter(sold seperately) into the track, click in your favorite Scotty rod holder or accessory and start fishing. Dimensions: 1-3/4" wide x 3/8" tall x 7" long (4" usable track)

Low Profile Track - Black - 8" Low Profile Track is made from corrosion proof high strength composite material that will last a lifetime. The lowest profile track on the market and a top load design allows for quick and easy setup of all your Scotty accessories. Install Scotty's Low Profile Track on your kayak, canoe, or any other watercraft. Slide the Scotty 438 Gear-Head Track Adapter(sold seperately) into the track, click in your favorite Scotty rod holder or accessory and start fishing. Dimensions: 1-3/4" wide x 3/8" tall x 10-3/4" long (8" usable track)

0440-BK-1 Low Profile Track - 1" The No. 440-BK-1 Low Profile Track is made from corrosion proof high strength composite material that will last a lifetime The lowest profile track on the market and a top load design allows for quick and easy setup of all your Scotty Rod Holders and Accessories Easily install Low Profile Track on your kayak, canoe, or any other watercraft Slide the Scotty No. 438 Gear-Head Track Adapter into the track, click in your favourite Scotty Rod Holder or Accessory and start fishing (Gear-Head Adapter, Rod Holder and Accessories not included) Track Dimensions: 1 3/4” wide x 3/8” tall x (1” usable track)

158 1" Ball with Low Profile Track Mount Adapt your Scotty low profile track to our 1″ ball mounting system. For use with all Scotty 1″ ball mounts and Scotty low profile tracks.  Features: 1″ Ball with Track Adapter

168 1-1/2" Ball with Low Profile Track Mount Adapt your Scotty low profile track to our 1.5″ ball mounting system. For use with all Scotty 1.5″ ball mounts and Scotty low profile tracks.  Features: 1.5" Ball with Track Adapter

Control Engine Trim with Pro-Trim Single, or any two functions with Pro-Trim Dual. Fits Safe-T mechanical steering, Rack & Pinion Steering, NFB No Feedback steering (all helms), SeaStar and SeaStar PRO hydraulic steering, Command 200 Rack & Pinion, Baystar, Sport, Sport Plus or Classic Tilt mechanism. “Momentary-On” switch is off in its center “at-rest” position. Switch actuates in up and down directions. U.V. stabilized ABS switch cover blends with dash. Stainless steel bracket fits most steering & adjusts for regular or deep dish wheels. Heavy duty marine wiring harness, color coded to match existing trim & jackplate wiring. Mylar decals for labeling of switch functions. Mounting hardware, instructions included. Display packed.