Replacement parts for Safe-T QC single and dual steering systems.

Type S - Standard Straight Shaft f/Mounting Behind the Dash The Straight shaft drive unit replaces the manual drive used on cable steered boats and is mounted directly behind the dash. The drive is directly compatible with the Morse 290 steering helm but comes with its own bezel kit and can be retrofitted in most installations using the cable and steering wheel from the manual steering helm on the boat. This drive can be mounted in 2 ways, either at 90° to the dashboard or at 20° to the dashboard. Spacer Kits are also available to reduce the space required behind the dashboard. Retro Fits to Most Cable Steered Vessel Easily Adaptable to S1 Autopilots The Only Viable Option When Adding an Autopilot to a Cable Steered Vessel Affordable, Reliable, Seamless-behind the Dash Installation 2 Year Limited Warranty

SP-120 Color System with Rudder Feedback & Type "S" Mechanical Dash Drive Features: The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control Does not require a separate junction box, everything simply connects to the rear of the control head This Autopilot is ideal for small vessels under 38' The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display Extremely easy to select your desired headings, operate, and setup, with new user friendly software High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to enhance performance NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay Autopilot Steering Modes: Manual (Power Steer) Auto (Pilot maintains selected Magnetic course) GPS (Steers to Waypoint or Routes when Interfaced with GPS) Wind (Steers to wind when interfaced to wind sensor for Sailboat installations) Protected by 2 Year SI-TEX Warranty Specifications: Waterproof: IPX6 Control Head Dimensions: 110 mm L x 110 mm W Voltage supply VOLTAGE: 12/24 Volts DC LCD Color LCD Display Constant Compass Heading Indicator and Rudder Angle Indicator Current consumption: 0.5 amps at 12VDC in standby mode Maximum Drive Output Current 15 Amps Operating temperature: -10ºC to +55ºC Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output Course Detection <1 Degree Package Includes: SI-TEX SP-120C Color LCD Autopilot Control Head NMEA Interface Cables 9 Axis Electronic Rate Gyro Compass Control Head Sun cover Product manual Mounting Screws

SP-120 Color System with Rudder Feedback & Type "T" Mechanical Dash Drive Features: The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control Does not require a separate junction box, everything simply connects to the rear of the control head This Autopilot is ideal for small vessels under 38' The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display Extremely easy to select your desired headings, operate, and setup, with new user friendly software High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to enhance performance NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay Autopilot Steering Modes: Manual (Power Steer) Auto (Pilot maintains selected Magnetic course) GPS (Steers to Waypoint or Routes when Interfaced with GPS) Wind (Steers to wind when interfaced to wind sensor for Sailboat installations) Protected by 2 Year SI-TEX Warranty Specifications: Waterproof: IPX6 Control Head Dimensions: 110 mm L x 110 mm W Voltage supply VOLTAGE: 12/24 Volts DC LCD Color LCD Display Constant Compass Heading Indicator and Rudder Angle Indicator Current consumption: 0.5 amps at 12VDC in standby mode Maximum Drive Output Current 15 Amps Operating temperature: -10ºC to +55ºC Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output Course Detection <1 Degree Package Includes: SI-TEX SP-120C Color LCD Autopilot Control Head NMEA Interface Cables 9 Axis Electronic Rate Gyro Compass Control Head Sun cover Product manual Mounting Screws

SP-120 Color System with RFB & Remote Mechanical Drive 1994+ Mercury I/O, Volvo Gas Features: The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control Does not require a separate junction box, everything simply connects to the rear of the control head This Autopilot is ideal for small vessels under 38' The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display Extremely easy to select your desired headings, operate, and setup, with new user friendly software High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to enhance performance NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay Autopilot Steering Modes: Manual (Power Steer) Auto (Pilot maintains selected Magnetic course) GPS (Steers to Waypoint or Routes when Interfaced with GPS) Wind (Steers to wind when interfaced to wind sensor for Sailboat installations) Protected by 2 Year SI-TEX Warranty Specifications: Waterproof: IPX6 Control Head Dimensions: 110 mm L x 110 mm W Voltage supply VOLTAGE: 12/24 Volts DC LCD Color LCD Display Constant Compass Heading Indicator and Rudder Angle Indicator Current consumption: 0.5 amps at 12VDC in standby mode Maximum Drive Output Current 15 Amps Operating temperature: -10ºC to +55ºC Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output Course Detection <1 Degree Package Includes: SI-TEX SP-120C Color LCD Autopilot Control Head NMEA Interface Cables 9 Axis Electronic Rate Gyro Compass Control Head Sun cover Product manual Mounting Screws

SP-120 Color System with RFB & Remote Mechanical Drive 1983-93 Mercury I/O, Volvo Diesel Features: The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control Does not require a separate junction box, everything simply connects to the rear of the control head This Autopilot is ideal for small vessels under 38' The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display Extremely easy to select your desired headings, operate, and setup, with new user friendly software High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to enhance performance NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay Autopilot Steering Modes: Manual (Power Steer) Auto (Pilot maintains selected Magnetic course) GPS (Steers to Waypoint or Routes when Interfaced with GPS) Wind (Steers to wind when interfaced to wind sensor for Sailboat installations) Protected by 2 Year SI-TEX Warranty Specifications: Waterproof: IPX6 Control Head Dimensions: 110 mm L x 110 mm W Voltage supply VOLTAGE: 12/24 Volts DC LCD Color LCD Display Constant Compass Heading Indicator and Rudder Angle Indicator Current consumption: 0.5 amps at 12VDC in standby mode Maximum Drive Output Current 15 Amps Operating temperature: -10ºC to +55ºC Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output Course Detection <1 Degree Package Includes: SI-TEX SP-120C Color LCD Autopilot Control Head NMEA Interface Cables 9 Axis Electronic Rate Gyro Compass Control Head Sun cover Product manual Mounting Screws

SP-120 Color System with RFB & Remote Mechanical Drive Inboard Engines Features: The SI-TEX SP-120C is an Autopilot designed for hydraulic steering, mechanical steering, & solenoid control Does not require a separate junction box, everything simply connects to the rear of the control head This Autopilot is ideal for small vessels under 38' The Autopilot can operate in either Virtual Rudder feedback mode in the case of Outboards or a separate Rudder Feedback unit can be added for inboard vessels SP-120C displays actual Compass heading & Selected Heading, along with Rudder Angle Displays simultaneously Compact 4.1” x 4.1” Splash proof Control head with large easy to read Color LCD LCD Display Extremely easy to select your desired headings, operate, and setup, with new user friendly software High performance 9 Axis Rate Gyro Compass provides the autopilot with excellent steering response Autopilot uses Input of GPS Speed over ground (SOG) and Course over ground (COG) to enhance performance NMEA-0183 GPS Interface accepts inputs from most Chart plotters for steering to waypoints and routes NMEA-0183 Output of Compass heading at 10kHz for interface to MFD’s with Chart/Radar Overlay Autopilot Steering Modes: Manual (Power Steer) Auto (Pilot maintains selected Magnetic course) GPS (Steers to Waypoint or Routes when Interfaced with GPS) Wind (Steers to wind when interfaced to wind sensor for Sailboat installations) Protected by 2 Year SI-TEX Warranty Specifications: Waterproof: IPX6 Control Head Dimensions: 110 mm L x 110 mm W Voltage supply VOLTAGE: 12/24 Volts DC LCD Color LCD Display Constant Compass Heading Indicator and Rudder Angle Indicator Current consumption: 0.5 amps at 12VDC in standby mode Maximum Drive Output Current 15 Amps Operating temperature: -10ºC to +55ºC Data Connections: NMEA-0183 GPS Input, NMEA-0183 10kHz Compass heading Output Course Detection <1 Degree Package Includes: SI-TEX SP-120C Color LCD Autopilot Control Head NMEA Interface Cables 9 Axis Electronic Rate Gyro Compass Control Head Sun cover Product manual Mounting Screws

SP-120 System with Rudder Feedback & Type "S" Mechanical Dash Drive  The SP-120 autopilot control system comprises the following units: SP-120 display and control head SI-TEX 9 Axis rate compass Rudder Feedback Unit (SP-120R only) In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.  A rudder actuator system comprises one of the following: Hydraulic system with helm pump and ram Mechanical steering system The autopilot should be connected to one of the following: Reversing motor/pump set connected into the existing hydraulic steering system Reversing mechanical drive unit connected to the existing steering mechanism Electronic Hydraulic Solenoid Valves

SP-120 System with Rudder Feedback & Type "T" Mechanical Dash Drive The SP-120 autopilot control system comprises the following units: SP-120 display and control head SI-TEX 9 Axis rate compass Rudder Feedback Unit (SP-120R only) In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.  A rudder actuator system comprises one of the following: Hydraulic system with helm pump and ram Mechanical steering system The autopilot should be connected to one of the following: Reversing motor/pump set connected into the existing hydraulic steering system Reversing mechanical drive unit connected to the existing steering mechanism Electronic Hydraulic Solenoid Valves

SP-120 System with Rudder Feedback & Remote Mechanical Drive - 1994 + Mercury IO/Volvo Gas The SP-120 autopilot control system comprises the following units: SP-120 display and control head SI-TEX 9 Axis rate compass Rudder Feedback Unit (SP-120R only) In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.  A rudder actuator system comprises one of the following: Hydraulic system with helm pump and ram Mechanical steering system The autopilot should be connected to one of the following: Reversing motor/pump set connected into the existing hydraulic steering system Reversing mechanical drive unit connected to the existing steering mechanism Electronic Hydraulic Solenoid Valves

SP-120 System with Rudder Feedback & Remote Mechanical Drive - 1983-93 Mercury IO/Volvo Diesel  The SP-120 autopilot control system comprises the following units: SP-120 display and control head SI-TEX 9 Axis rate compass Rudder Feedback Unit (SP-120R only) In addition the SP-120 has to be connected to a drive unit which controls the rudder actuator system in order to complete the full autopilot system. The actuator system provides the physical movement to the rudder responding to the direction of control signals provided by the SP-120.  A rudder actuator system comprises one of the following: Hydraulic system with helm pump and ram Mechanical steering system The autopilot should be connected to one of the following: Reversing motor/pump set connected into the existing hydraulic steering system Reversing mechanical drive unit connected to the existing steering mechanism Electronic Hydraulic Solenoid Valves

No-Feedback single cable steering system designed for V-6 and smaller engines. 4.2 turns lock-to-lock with patented NFB technology for the easiest steering ever. Replaces standard Safe-T system without dash modification, accepts Standard 3/4" tapered steering shaft. Package includes NFB helm, QC cable with stainless steel output ends, and 90° NFB rotary bezel.

No-Feedback single cable steering system designed for V-6 and smaller engines. 4.2 turns lock-to-lock with patented NFB technology for the easiest steering ever. Replaces standard Safe-T system without dash modification, accepts Standard 3/4" tapered steering shaft. Package includes NFB helm, QC cable with stainless steel output ends, and 90° NFB rotary bezel.

No-Feedback single cable steering system designed for V-6 and smaller engines. 4.2 turns lock-to-lock with patented NFB technology for the easiest steering ever. Replaces standard Safe-T system without dash modification, accepts Standard 3/4" tapered steering shaft. Package includes NFB helm, QC cable with stainless steel output ends, and 90° NFB rotary bezel.

No-Feedback single cable steering system designed for V-6 and smaller engines. 4.2 turns lock-to-lock with patented NFB technology for the easiest steering ever. Replaces standard Safe-T system without dash modification, accepts Standard 3/4" tapered steering shaft. Package includes NFB helm, QC cable with stainless steel output ends, and 90° NFB rotary bezel.