|
Hydraulic steering cylinders for SeaStar and BayStar systems. 1" shaft. Features proprietary seal material, similar to Tournament 2 cylinders, with resistance to compression set. 8-hole end gland design for improved serviceability. Adjustable stainless steel O-ring seal (ORB) fittings.
|
738.99 |
|
|
D-SS Series PRO Flood LED Surface Mount - Pair - Black
One of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Family: D-SS Side Shooter | PRO
Optics: Flood
LED Color: White
Finish Color: Black
Mount Type: Surface
Shipping Dimensions: 6" × 8" × 6"
Product Weight: 2.44lb
Sold As: Pair
Up to 50,000+ Hour Lifespan
IP68 Compliant
Impact Resistant Lens
GORE® Pressure Equalizing Vent
Harness & Switch Included
Mounting Brackets Included
Specifications:
Watts: 47
Amp Draw: 3.36
LED's: 7
Raw Lumens: 5544
Lux @ 10m: 71.29
Beam Distance: 84.4 m
Peak Beam Intensity: 7,129 cd
|
292.50 |
|
|
D-SS Series PRO Spot LED Surface Mount - Pair - White
One of RIGID's most versatile, compact lighting solutions just got better with the RIGID D-SS PRO, Dually-Side Shooter Professional Race Output LED pod. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications. The D-SS PRO incorporates powerful optics and recently improved LED technology for greater output with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS PRO packs a powerful punch with up to 102% more raw lumens depending on the optics chosen The D-SS PRO fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with RIGID's advanced Spot, Flood, or Driving optics, so there's a D-SS PRO lighting solution for nearly any application. The D-SS PRO LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only RIGID provides a broad, powerful lighting solution in such a compact package.
Features:
Family: D-SS Side Shooter | PRO
Optics: Spot
LED Color: White
Finish Color: White
Mount Type: Surface
Shipping Dimensions: 6" × 8" × 6"
Product Weight: 2.44lb
Sold As: Pair
Up to 50,000+ Hour Lifespan
IP68 Compliant
Impact Resistant Lens
GORE® Pressure Equalizing Vent
Harness & Switch Included
Mounting Brackets Included
Specifications:
Watts: 47
Amp Draw: 3.21
LED's: 7
Raw Lumens: 5544
Lux @ 10M: 652.41
Beam Distance: 255.4M
Peak Beam Intensity: 65,241 cd
|
292.50 |
|
|
Stainless Steel Side Mount LED Navigation Lights - 2 NM - Port & Starboard
LED Side Mount Side Lights 400079 are approved for USCG 2 NM (Colreg 2 mile). Constructed of corrosion resistant stamped 304 stainless steel. One pair includes port and starboard lights. Surface mounts vertically with two #8 FH fasteners (not included). 12VDC. Low amp draw.
All USCG approved navigation lights must be mounted properly to provide the correct visual alignment and allow unimpeded sight lines. Please refer to USCG regulations for 1 NM and 2 NM navigation lights for more information.
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
84.44 |
|
|
9" Side Mount Rod Holder - 1-5/8" I.D.
316 Stainless Steel
Designed for applications where clamp-on or flush mount holders are not practical
Can be mounted on any vertical flat surface
White vinyl insert included to protect your rod
|
92.93 |
|
|
Stainless Steel Mounting Bracket f/Side Mount Table Pedestal
Polished stainless steel, side mount table pedestal removes when not in use for clear decks. Locking feature offers added mounting strength.
Features:
Polished stainless steel pedestal & table support
Anodized aluminum bracket
Locking pull pin offers added mounting strength
Removable 125° bent leg
Dimensions: 4-7/8"W x 4"H x 1/2"D
Screw: #10 flat head / 1/4" hole.
Benefits:
Eliminates the need for mounting holes in boat deck and/or cockpit
Easy to remove when not in use, for clear passage and storage
Quick set-up and removal in tight spaces
Increased leg & foot room
|
75.34 |
|
|
Side Mount Outrigger Holders - Fabricated 304 S.S. - 1-1/8" I.D.-Pair
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. For best installation, use our backing plates 88502-1 or 88505-1. For replacement tubes use 88501 or 88503.
|
114.12 |
|
|
Side Mount Outrigger Holders - Cast 316 S.S. - 1-1/8" I.D.-Pair
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. For best installation, use our backing plates 88502-1 or 88505-1. For replacement tubes use 88501 or 88503.
|
187.49 |
|
|
Side Mount Outrigger Holders - Cast 316 S.S. - 1-1/2" I.D.- Pair
Our premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. For best installation, use our backing plates 88502-1 or 88505-1. For replacement tubes use 88501 or 88503.
|
334.24 |
|
|
9" Swivel Side Mount Rod Holder - 1-5/8" I.D.
316 Stainless Steel
Designed for applications where clamp-on or flush mount holders are not practical
Can be mounted on any vertical flat surface
White vinyl insert included to protect your rod
|
114.12 |
|
|
Side Mount Enclosure
For cockpit or any onboard washdown
HoseCoil's Side Mount Enclosure is constructed of high density, durable ABS with high gloss UV protective coating. Included is a solid blue 15' HoseCoil constructed of high performance polytherester material.
HoseCoil features a spray pattern adjustable nozzle with a comfortable rubber grip. This enclosure is designed to connect directly into the boat's internal pressurized water system.
Dimensions: 8"w x 15"h x 5"d
|
102.73 |
|
|
Portable Side Mount with Dual Lock 4 Rod Holder
The great side-mount Rod Holder in a portable version. Easy to install using a 3M Dual-lock technology. Simply clean and place the mounting squares where you want and you're done. The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion. Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods. Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations. Holds up to 4 Rods.
|
42.53 |
|
|
Portable Side Mount with Dual Lock 6 Rod Holder
The great side-mount Rod Holder in a portable version. Easy to install using a 3M Dual-lock technology. Simply clean and place the mounting squares where you want and you're done. The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion. Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods. Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations. Holds up to 6 Rods.
|
48.46 |
|
|
Portable Side Mount with Dual Lock 8 Rod Holder
The great side-mount Rod Holder in a portable version. Easy to install using a 3M Dual-lock technology. Simply clean and place the mounting squares where you want and you're done. The VHB adhesive mounts to plastic, wood, masonry, metal or aluminum and is a permanent adhesion. Indoor/Outdoor use - great for aluminum boats, docks, garages - anywhere you want to store your rods. Rod Holders can be removed easily for cleaning, or with additional mounting squares can be used in multiple locations. Holds up to 8 Rods.
|
62.03 |
|
|
Side Mount Rod Holder - Black
Constructed of injection molded polypropylene. These Side Mount Rod Holders have an integral, molded-in standoff located on the back of the rod holder, allowing direct mounting to any flat surface. Accommodates rods up to 1-3/4” in diameter. Installs with two #10 RH fasteners (not included).
|
8.15 |
|