Repair parts for SeaStar hydraulic cylinders.

Cat Hawk Wind Indicator for Non-Spin Catamarans up to 8M The Cat Hawk is designed for non-spinnaker Catamarans up to 8m. It has been developed to mount onto the front of the Forestay Bridle where it is ideally situated for maximum visibility both upwind and downwind. The Cat Hawk uses the same Vane Arm as the Hawk with all the benefits of Balance, "V" Jewel bearing, weight and UV Protection that it brings. The reference arms can be set for either upwind or downwind angles. The Support Rod is aluminum and has the Hawk quick mount clip for quick rigging and de-rigging.  Specifications: Vane Arm length 25cm (9.8") Weight 30 grams

Extension Post f/Cannon Rod Holder - 2-Pack Features: Extends height of rod holder by 6" Allows forward & backward pivot adjustment Alignment key allows for 360° pivot while holding post securely in place

Stainless Steel Tube & Rod for Up To 150HP Up To 150HP Outboard Specifications: Cylinder Tube = Stainless Steel Cylinder Tube Dia. = 1.33 Inches Cylinder Rod = Stainless Steel Cylinder Brackets = Stainless Steel Cylinder 1 " Nylok Nuts = Stainless Steel Cylinder End Caps = Cast Aluminum Cylinder Rod Stroke = 7-1/2 Inches Cylinder Type = Un Balanced Cylinder  Cylinder Volume Big Side Vol = 155 ccSmall side Vol = 115 cc Steering Wheel HO/HO = 5.5 and 4.1 Turns Total length Rod Compressed = 15.75 Inches Rod Extended = 23.00 Inches Cylinder Total Weight = 3.15 Pounds (1427 Grams)

Anchor Lock w/ Flush Deck Mount (P/N 244) Anchor release system for small boats in still-water fishing situations.  Features: Easy lock and release action allows anchor line adjustment with only one hand.  For use with rope up to 1/2' diameter.  Tough construction and roller bearing for smooth, quiet operation. Includes No. 244 Flush Mount Bracket Mount Dimensions: 4" x 2" x 2" Bolting Dimensions: 1-15/16" 3-3/16" WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Hypro 3300-0001, 3/4" M X 3/4" F Bronze Relief Valve 400 PSI Ports-NPT Inlet (M) Outlet (F): 3/4" M x 3/4" F Max PSI: 400 Body Material: Cast Bronze Valve Material: Stainless Steel Ball

Hypro 3300-0002, 1/2" M X 1/2" F Bronze Relief Valve 200 PSI Ports-NPT Inlet (M) Outlet (F): 1/2" M x 1/2" F Max PSI: 200 Body Material: Cast Bronze Valve Material: Stainless Steel Ball

Hypro 3300-0015, 3/4" M X 3/4" F Nylon Relief Valve Ports-NPT Inlet (M) Outlet (F): 3/4" M x 3/4" F Max PSI: 150 Body Material: Nylon Valve Material: Nylon

Hypro 3300-0094, 1" M X 3/4" F Bronze Relief Valve 150 PSI Ports-NPT Inlet (M) Outlet (F): 1" M x 3/4" F Max PSI: 150 Body Material: Cast Bronze Valve Material: Stainless Steel Ball

DeviceNet (M) to ST-Ng (F) Adapter This handy accessory will make networking Raymarine and 3rd party NMEA2000 devices much simpler. Using the adapters, you can instantly convert devices or spur cables from one connector system to the other.

DeviceNet (M) to ST-Ng (F) Adapter - 90° This handy accessory will make networking Raymarine and 3rd party NMEA2000 devices much simpler. Using the adapters, you can instantly convert devices or spur cables from one connector system to the other.

El Outboard Steering Kit for Up To 150HP Motors 401 Manual Helm with Fitting Kit The heart of the Admiral Series is the HyDrive M402 helm unit. The 7-piston pumps are precision manufactured to standards and tolerances that are second to none. In-built lock valves, which eliminate torque feedback are standard. The light, smooth steering must be experienced to be appreciated. Designed as a complete Do It Yourself installation, everything you need is supplied including detailed instructions. You don’t even have to know anything about hydraulics! The Admiral Series 401 helm units offer improved internal efficiencies and unique assembly design, consolidating HyDrive Engineering‘s position as a world leader in hydraulic boat steering. Two years of design development and testing have resulted in these helms being selected as the standard helm supplied in all HyDrive steering kits. Features: Front-mount design for maximum appeal Improved internal efficiency Brass wheel nut and washer Stainless steel steering wheel shaft - not aluminum Anti-splash filler cap for rough conditions Unique assembly design for ease of service and maximum performance Stainless steel studs, nuts, and washer pre-fitted for convenience Highly efficient non-return valves for non-feedback of helm unit - eliminates all torque from the steering cylinder Ultra 15 Oil Quantity 2 - 1 Liter Bottles Features: For use in HyDrive Skipper and Admiral Series Hydraulic steering systems only Not for use in HyDrive 2000 Series Steering Systems This oil is compatible with HyDrive HF15, but should not be mixed with any other fluids N-8 - 49' Nylon Tube 3/8" Features: Semi-Rigid Nylon Tube at 3/8 Inch OD (49' Coil, You Cut to length to suit) Use with HP Compression Olive and Nut Fittings Supplied in HY EL O/B KIT Stainless Steel Tube & Rod for Up To 150HP Up To 150HP Outboard Specifications: Cylinder Tube = Stainless Steel Cylinder Tube Dia. = 1.33 Inches Cylinder Rod = Stainless Steel Cylinder Brackets = Stainless Steel Cylinder 1 " Nylok Nuts = Stainless Steel Cylinder End Caps = Cast Aluminum Cylinder Rod Stroke = 7-1/2 Inches Cylinder Type = Un Balanced Cylinder  Cylinder Volume Big Side Vol = 155 ccSmall side Vol = 115 cc Steering Wheel HO/HO = 5.5 and 4.1 Turns Total length Rod Compressed = 15.75 Inches Rod Extended = 23.00 Inches Cylinder Total Weight = 3.15 Pounds (1427 Grams)

      Sprayway manufactures a complete line of industrial MRO, automotive, screen print and housekeeping products since 1947. Sprayway has been an innovative industry leader, and its Sprayway Glass Cleaner is recognized as "The World's Best." From marine detailing to industrial maintenance, whether it is a detailing wax or an industrial lubricant, Sprayway provides wide-ranging industries with the products they need.     The World's Best Glass Cleaner - Excellent for windows, mirrors, windshields and other glass surfaces! For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma.   SHOP: https://www.clrmarine.com/462m4/manufacturers/s/sprayway.html     Specials    Closeouts    Remanufactured    Rebates  

Dometic DVF Vent Filter for Holding Tanks Dometic goes that extra mile so that you don't have to and reducing the use of chemicals is always our aim, especially in a marine environment.  The Dometic DVF vent filter ensures just that and is designed to absorb odors from a holding tank vent and keep the surrounding air clean and pleasant.   The vent filter eliminates the need for any holding tank chemicals since it is manufactured with superbly effective odor-absorbing filter material. Adapters for different vent hose sizes are included in the kit. Features: No chemicals needed Absorbs odors Environmental awareness Legacy P/N 309311004 and 309311001  *Sold as an individual  WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm, and ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov. This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Sierra replacement gimbal bearings Mercruiser engines.