|
Power Purge Jr. is the quickest way to bleed a SeaStar/BayStar system. Steering feel is solid every time. Complete fill and purge in 10 minutes or less. Easy to operate. Screens large contaminants from steering fluid. Uses quick connect fittings. Portable size with convenient electrical hook-up utilizing 12v boat battery.
|
1379.99 |
|
|
NaviTech™ Power Steer Assembly
Now you can get the same technology used to drive the most powerful and best handling cars for your boat.
Taking the latest technology from the automotive industry, Ultraflex has combined Electronic Power Steering (EPS) used in the most popular cars in the world with the latest mechanical steering helms and Mach 90 high efficiency steering cable to deliver unprecedented performance.
Perfectly silent, the system draws minimal power and furtheremore is very easy to install.
The NaviTechTM also has Integrated System Monitoring (ISM) which detects certain operating conditions including the number of cycles and notifies the end user with a vibration signal in the steering wheel if the cable needs to be changed. Never before has a steering system monitored it’s own operating conditions and given the driver diagnostic feedback.
For specific applications Ultraflex can use programmable software to dial in the hand wheel effort and steering output to meet specific performance objectives of boat builders.
A Complete Steering System Consists of:
Power assisted steering helm: T91NAV - 43207S - single cable steering helm
Tilt mechanism: X66 - 40613M - Tilt mechanism for NaviTechTM tilt mount helms. Tilt range of 48° and five locking positions
Steering cable: M90 Nav (patented)
ATTENTION: M90 Nav steering cable is suitable for use also with T71FC, T72FC, T73NRFC, T81FC, T82FC, T83NRFC, T91, T93ZT, T101, T103ZT. Ultraflex steering helms. M66 will not fit the following Uflex helms: T91, T93ZT, T101, T103ZT.
Optional steering wheel
Features and Technical Specifications:
Automotive steering effort and response
100% Balanced steering - Port to Starboard / Starboard to Port
Silent Operation
Monitoring software with integrated cycle counter, for a correct cable replacement.
By haptic feedback on the wheel, the system is able to signal anomalies, such as:
Excessive cable load
Stuck cable alarm
Field tested for over 3 years
16 Nm of assist torque capability
Able to tune on center and end of travel torque effort
Consistent steering assist through all vessel speed ranges
Applied in leading automotive application since 2011. Nowadays automotive production is over 1 million units per year
10 - 15 VDC
8 - 15 A nominal current during steering maneuvers
Supplied with 10 ft electrical harness. It needs a 40 A fuse (to be ordered separately).
Validation for Marine application is per CE, ABYC P17, P27, and ISO 25197
NMMA Type Acceptance Completed
Limit of Applications:
Outboard engines:
Up to 150 hp, maximum 50 mph, no jackplates
|
2162.65 |
|
|
NXL-M4 Full Range 4 Channel IPX5 Marine Grade Amplifier - 150 x 4W @ 4-Ohm
Designed for intense sessions that keep the party boat rocking all night long; the NXL-M4 is DS18’s high-quality, powerful amplifier for the wave runner looking for a big sound with a small footprint!
As a Class D Digital amplifier, the NXL-M4 uses a direct insert speaker and power terminals significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it lacks in size it makes up for in power.
The NXL-M4 handles 150W x 4CH @ 4 Ohms; 230W x 4CH @ 2 Ohms; and 440W x 2CH @ 4 Ohms Bridge of RMS Power and 1800W Peak Power.
Get clean, well-defined sound for with enough features (Fully Variable Bass Boost, Low Pass Filter, and High Pass Filter) to tune your music perfectly for optimal audio enjoyment! This full-range amplifier handles all speakers insanely well and has the features to make sure they play the way you want them to!
This amplifier is tough enough to stand up to the worst the waves throw at you! All controls are guarded by high-strength front covers that guarantee impenetrable defense against the elements; coated 4-layer PCB helps prevent corrosion caused by salt water; and Voltage, Thermal, and Short Circuit Protection for easy monitoring of your power levels.
Order the NXL-M4 for insane power out on the water!
Features:
Hardware resistant to corrosion and UV Protection
Coated 4 Layers PCB to prevent corrosion
IPX5 Water Resistance Grade
High Level Input For Radio Use
Front cover to keep the controls safe to the elements
LED Clip Indicator to easier adjustment
Stable and Reliable Class D Circuit Design
Sound Quality Verification Using AP Instruments
Direct Insert Power and Speaker Terminals
Short Circuit, Thermal, and Voltage Protection
Technical Specifications:
Number of Channels - 4
Frequency Response - 20Hz - 20KHz
2 Ohm RMS Power Per Channel - 4 x 230W
4 Ohm RMS Power Per Channel - 4 x 150W
4 Ohm RMS Power Bridge Channel - 2 x 440W
Signal-to-Noise Ratio - >90dB
Product Dimensions: (L x W x H) - 9.6" x 4.5" x 1.7"
*Sold as an Individual
|
479.94 |
|
|
Masterflush 8740 Macerator Toilet - 12V - White
Enjoy the upscale look and user-friendly performance of a premium residential toilet with the Dometic 8700 series of MasterFlush toilets. The elongated seat and deep bowl provide ultimate comfort, and the high-performance macerator pump ensures thorough flushing every time while operating 30 % more efficiently than other macerator heads.
Dometic MF 8700 toilets offer a statuesque, houshold-style fixture that fits the demanding needs of luxury vehicles or vessels. The standard-height toilet with elongated seat and residential-size bowl combines premium comfort with powerful flushing at the touch of a button.
Comes with Dometic Touchpad Flush Switch.
Features:
Powerful macerating flush
Quieter, shorter flush duration than other macerator toilets
Two flush options: Normal or Low allow efficient water consumption
Standard-height toilet with residential-size bowl and elongated seat for premium comfort
Through-the-floor or through-the-wall discharge fittings
Electronic flush handle with chrome finish
Technical Specifications:
Color - White
Material - Toilet - ceramic, toilet base - ceramic
Water Supply - Raw or Fresh Water
Voltage - 12 V
Flush Control - MasterFlush Switch (included)
Dimensions - Depth 21.5" x Height 19" x Width 14.75"
Seat Height - 19"
Weight - 35 Pounds
Seat Close - Standard
Seat Type - Enameled Wood
Legacy # 304874020
*Sold as an Individual
WARNING: This product can expose you to chemicals including ARSENIC which is known to the State of California to cause cancer or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
1651.19 |
|
|
D-SS Driving, Spot & Flood LED Lights
One of Rigid's most versatile, compact lighting solutions just got better with the D-SS, Dually Side Shooter LED cube. Perfect for any application that requires a wide spread beam, including A-Pillars, Fog Lights, and motorcycle applications.
The D-SS cube incorporates the same powerful optics and legendary LED technology as Rigid's popular D-Series lights but with the added benefit of additional LEDs aimed to the side for a much broader beam. The D-SS fixtures boast up to 120-degrees of horizontal lighting coverage when used in pairs or when used in the single light applications. The main forward-facing LEDs are available with Rigid's advanced Flood, Spot, or Driving optics, so there's a D-SS lighting solution for nearly any application.
The D-SS LED lights are available in pairs with three side-shooting LEDs on one side of each fixture, or in single applications with a pair of side-shooting LEDs on both sides of the fixture. Only Rigid provides a broad, powerful lighting solution in such a compact package.
Ignite Surface Mount Diffused, Flood & Spot LED Lights
The Rigid Ignite™ is the smallest, most versatile light in Rigid Industries' product line! Measuring approximately 1.4” x 1.4” x 2”, this flexible light packs 1000 raw lumens using Spot, Flood or Diffused beam patterns; perfect for any application where short range light output is needed.
The Ignite also utilizes a Go-Pro® style mounting bracket which mates with an array of off the shelf Go-Pro mounts. Due to the wide range of mounting options, the Ignite's applications are almost limitless. The compact and lightweight housing makes the Ignite a great choice for auxiliary lighting on cars and trucks, motorcycles, UTVs, and even marine applications. Low current draw (less than 1 amp) and voltage requirements (6-28 volts) makes the Ignite adaptable to any application.
*Single light kits include one Ignite, mounting brackets, and related hardware. GoPro Mount Not Included.
Specials Closeouts Remanufactured Rebates
|
|
|
For use with Adjustable Tie Bars on standard Dometic steering cylinders. Allows the consumer to take full advantage of all the features and benefits of the heavy-duty adjustable tie bar products for twin engine applications up to 600 HP. Utilizes Tournament series adjustable tie bars. High strength, forged aluminum. Eliminates need for cut-to-length traditional tie bars.
|
229.99 |
|
|
For use with Adjustable Tie Bars on standard Dometic steering cylinders. Allows the consumer to take full advantage of all the features and benefits of the heavy-duty adjustable tie bar products for twin engine applications up to 600 HP. Utilizes Tournament series adjustable tie bars. High strength, forged aluminum. Eliminates need for cut-to-length traditional tie bars.
|
238.99 |
|
|
Xtreme Power Assist Steering is engineered to bring the smooth, easy control of electric power-assisted steering to a wide range of popular boats, including pontoons, runabouts, RIBS, aluminum fishing boats and center consoles without increasing the load on mechanical steering helm or cable. Steering effort is significantly reduced, providing a car-like driving experience. Once installed, the mechanical steering cable only turns the power assist unit, while the electric steering actuator actually turns the engine load. Engineered to fit a wide range of single engine, mechanically steered outboard boats from 90-200HP. Self-contained, plug-and-play system easily mounts to all major outboard brands and integrates with the boats existing mechanical steering. Built in Fail-Safe System automatically reverts to mechanical steering in the event of a system failure.
|
1999.99 |
|
|
Sierra replacement power steering pumps and pulleys for Mercruiser engines.
|
93.99 |
|
|
Power Grip Carbon Fiber Wheel
Lewmar has upped the steering wheel game. The Power Grip steering wheel gives boaters precision handling with the 3-spoke design. The wheel’s underside is designed with finger grips for even more control and comfort. Each Lewmar steering wheel has a pre-installed Power-Grip knob.
Features:
High-strength and low-weight carbon fiber
High-gloss UV-resistant lacquered finish
Rear face EVA molded insert grips
Deep dish design for extra room and comfort
Non-magnetic
Center hub insert machined from solid billet 316 stainless steel
Pre-assembled with ball-raced Power Grip for ease of use
Rim diameter (inch): 13-1/2”
Hole diameter (inch): 3/4" taper
Dish: 22 degrees (13-1/2")
|
1028.64 |
|
|
XPS Pontoon Power Steering Unit
Don’t get left behind…take advantage of the ease, control, and power of GEN 2, the most advanced XPS Power Steering yet!
The Panther XPS G2 Power Steering System is a hybrid system that combines the durability and dependability of cable steering with the ease of automobile-like power steering. The Panther XPS G2 gradually reverts to cable steering in case of hose failure, steering fluid leak, or power loss to the pump, so you’re NEVER without steering. Engineered to make steering your boat as effortless as the vehicle you drive. No matter the vessel you operate, XPS offers affordability, confidence, fitness, and all-around ease of operation.
Safe:
Existing Cable steering acts as a safety backup in case of system failure
Exceeds ABYC mechanical and hydraulic steering standards
Effortless:
Automobile like effort
Eliminates prop torque
Easy to maneuver in tight quarters, especially around docks and landings
Broad Fit Range:
Designed to fit any boat or pontoon that can use cable steering
The cylinder can be fully extended without interference
Outboard engines 90-250Hp
Save Time & Money:
Self-bleeding hoses
Utilize existing mechanical steering
Save Power:
Stored energy allows for short pump run-times
Less power draw substantially reduces the risk of dead batteries
|
1138.33 |
|
|
Baystar Hydraulic Steering System for single-outboard powered boats rated up to 150 HP, including runabouts and inflatables, and outboard engines with ABYC standard engine tilt tubes. For single station, single engine use only. BayStar is not intended for high speed, high performance type boats, such as bass boats. Low friction hydraulic steering system, 5 turns lock-to-lock. Balanced cylinder with compact design that fits most splashwells and provides full engine movement. Compact helm with small footprint, requires only 3" dash hole (standard or tilt).Packaged complete with helm, cylinder, fittings, tubing, oil, fill kit and detailed instructions. Standard 3/4" tapered steering shaft. Meets ABYC standards and NMMA certification requirements. Baystar Steering System is not for use on pontoon boats.
|
988.99 |
|
|
Dramatically reduces wheel torque which reduces steering effort. Reverts to manual mode in the case of power loss. Suitable for use with autopilots. Wall or floor mount. May be used with O/B, I/O, I/B powered boats equipped with standard hydraulic steering. Supplied with 15' wire harness. Both 12V and 24V systems are automatically recognized by the unit. Requires HA1206 fuse kit (sold separately) for ABYC compliance when connecting the PA1200-2 directly to the battery.
|
2694.99 |
|
|
No-Feedback single cable steering system designed for V-6 and smaller engines. 4.2 turns lock-to-lock with patented NFB technology for the easiest steering ever. Replaces standard Safe-T system without dash modification, accepts Standard 3/4" tapered steering shaft. Package includes NFB helm, QC cable with stainless steel output ends, and 90° NFB rotary bezel.
|
369.99 |
|
|
No-Feedback single cable steering system designed for V-6 and smaller engines. 4.2 turns lock-to-lock with patented NFB technology for the easiest steering ever. Replaces standard Safe-T system without dash modification, accepts Standard 3/4" tapered steering shaft. Package includes NFB helm, QC cable with stainless steel output ends, and 90° NFB rotary bezel.
|
369.99 |
|