|
Designed for single, non-power-assisted outboard configurations up to 350 hp, especially those capable of speeds over 65 mph, with options like jack plates and performance props. Features No Feedback steering lock valves, low friction hydraulic steering system with ORB fittings on helm and cylinder, 4.0 turns lock to lock. Meets NMMA and ABYC requirements. Refer to application guide below to determine compatibility. Order HO57XX hoses, sold separately.
|
269.99 |
|
|
Hypro 9910-Kit-1734, Repair Kit
|
242.32 |
|
|
Designed for single, non-power-assisted outboard configurations up to 350 hp, especially those capable of speeds over 65 mph, with options like jack plates and performance props. Features No Feedback steering lock valves, low friction hydraulic steering system with ORB fittings on helm and cylinder, 4.0 turns lock to lock. Meets NMMA and ABYC requirements. Refer to application guide below to determine compatibility. Order HO57XX hoses, sold separately.
|
269.99 |
|
|
Designed for single, non-power-assisted outboard configurations up to 350 hp, especially those capable of speeds over 65 mph, with options like jack plates and performance props. Features No Feedback steering lock valves, low friction hydraulic steering system with ORB fittings on helm and cylinder, 4.0 turns lock to lock. Meets NMMA and ABYC requirements. Refer to application guide below to determine compatibility. Order HO57XX hoses, sold separately.
|
269.99 |
|
|
Designed for single, non-power-assisted outboard configurations up to 350 hp, especially those capable of speeds over 65 mph, with options like jack plates and performance props. Features No Feedback steering lock valves, low friction hydraulic steering system with ORB fittings on helm and cylinder, 4.0 turns lock to lock. Meets NMMA and ABYC requirements. Refer to application guide below to determine compatibility. Order HO57XX hoses, sold separately.
|
269.99 |
|
|
Designed for single, non-power-assisted outboard configurations up to 350 hp, especially those capable of speeds over 65 mph, with options like jack plates and performance props. Features No Feedback steering lock valves, low friction hydraulic steering system with ORB fittings on helm and cylinder, 4.0 turns lock to lock. Meets NMMA and ABYC requirements. Refer to application guide below to determine compatibility. Order HO57XX hoses, sold separately.
|
269.99 |
|
|
Hydraulic Hose Kit 4' - Pair
Two high pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.
Fittings: ORFS
*Not recommended for use with SilverSteer™ Series cylinders.
|
132.44 |
|
|
Hydraulic Hose Kit 2' - Pair
Two high pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.
Fittings: ORFS
*Not recommended for use with SilverSteer™ Series cylinders.
|
132.44 |
|
|
Hydraulic Hose Kit 6' - Pair
Two high pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.
Fittings: ORFS
*Not recommended for use with SilverSteer™ Series cylinders.
|
138.85 |
|
|
Hydraulic Hose Kit 3' - Pair
Two high-pressure flexible hoses, with pre-crimped fittings and bend restrictors on both ends.
Specifications:
Length: 3 ft.
Fittings: ORFS
*Not recommended for use with SilverSteer™ Series cylinders.
|
132.44 |
|
|
XPS Hose Kit - 14'
This Panther hose kit is needed for the Panther XPS System.
Features:
The low-pressure hose is 12 in. longer to allow for uninterrupted travel when connected to the cylinder actuator
14 ft. – 1/4 in. Hi-Pressure Hose
15 ft. – 5/16 in. Return Hose
Includes:
Contains two hoses high pressure and low pressure—with fittings
|
138.43 |
|
|
Hypro 9910-Kit2445 Kit Valve Repair
This repair kit is for the following pump models:
DBA110, DBS110, DBA140, DBS140
9910-KIT2445 Includes:
Qty 6 9910-680070 O-Ring
Qty 6 9910-759051 Complete valve
(Image does not represent exact kit contents)
|
220.64 |
|
|
Kit OB - Hose Kit for Single Station Installation
Consists of a pair of high pressure hoses supplied with preassembled fittings on both ends.
Length: 14 Feet
Fittings: 3/8 Compression Fitting
|
141.91 |
|
|
Hoses have an integral bulkhead fitting for tidy routing of hoses through a splashwell bulkhead, helping to eliminate excess loose hose, kinking or chafing. Can be used with all SeaStar systems, except BayStar, Capilano and 3-line inboard. 2 Hoses per kit.
|
284.79 |
|
|
Hypro 9910-Kit-1920 VALVE KIT FOR D50
The Hypro Valve Repair Kit 9910-KIT1920 is used to replace worn or damaged valves on the D50 Diaphragm Pump.
Includes4 complete valve assemblies and 4 O-Rings.
|
168.27 |
|