Steer Stop Outboard Hydraulic Steering Lock Set - 4" T-H Marine developed the first steering stop available for outboard motors and now we've revised that design so it stands apart from imitation and performs better than any other on the market.  With our 4" Steer Stop Outboard Hydraulic Steering Lock in place, boaters can center their outboard motor equipped with hydraulic steering and keep it from wandering when trailering. Similar to the original Steer Stop, units clip onto hydraulic steering rams on either side of outboard to keep engine straight and prevent damage to motor supports. The cord then keeps units together when stowed and aids removal. Additionally, with the new grip built into the design, it is easier than ever to install and remove the Steer Stop Outboard Hydraulic Steering Lock, saving you effort and wear and tear on your hands. Features: Must-know information about the 4" Steer Stop Outboard Hydraulic Steering Lock: Locks hydraulic steering when trailering Fits most steering cylinder rods on outboard engines Snaps over outboards hydraulic steering cylinder rods Helps keep engine centered during transport Protects steering system, outboard, and motor supports Includes cord to connect units for storage and to aid in removal Grip makes it even simpler and easier to put on and take off WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

SilverSteer™ 2.0 High-Performance Front Mount Outboard Hydraulic Steering System - 1500PSI FM V2 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders. Features: Horsepower: Single engine, 350hp, dual engine, 600hp Helm: 7.3 cu in/120cc Hose: 1,500psi Turns Lock-to-Lock: 4.3 Included Equipment: UP25 F-SVS front mount helm pump, UC128/2-SVS front mount outboard cylinder, hydraulic oil (two qts.), Hose kits sold separately Steering Wheel: Sold separately Steering Wheel Shaft: 3/4" tapered Warranty: Two years

SilverSteer™ Front Mount Outboard Hydraulic Steering System w/ UC130-SVS-1 Cylinder Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flats boat or tournament-style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive, and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders. UC130-SVS-1 Cylinder is ideal for applications with limited space or potential pinch-points between the cylinder and transom (i.e., when tilting the motor all the way up or motors mounted on a jack plate).  The end-mounted fittings keep the hydraulic hoses free and clear. SilverSteer™ Package Kit Contains: UC130-SVS-1 Cylinder (fittings face out from the ends of the cylinder)

SilverSteer™ Universal Front Mount Outboard Hydraulic Steering System w/ UC128-SVS-1 Cylinder Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders. SilverSteer™ Package Kit Contains: UC128-SVS-1 Cylinder (fittings are on the face of the cylinder, between the cylinder and boat's transom)

SilverSteer™ Universal Front Mount Outboard Hydraulic Tilt Steering System - 1500PSI V1 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over-tightening or leaking fittings from loosening during installation, a common problem on competing cylinders. SilverSteer™ Package Kit Contains: UC130/1-SVS Cylinder UP25F-SVS Helm 2 Quarts of Hydraulic Oil

SilverSteer™ Universal Front Mount Outboard Hydraulic Tilt Steering System - 1500PSI V2 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders. SilverSteer™ Package Kit Contains: UC130/2-SVS cylinder

SilverSteer™ Outboard Hydraulic Tilt Steering System - UC130 V1 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.

SilverSteer™ Front Mount Outboard Hydraulic Steering System - UC130 V2 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by over tightening or leaking fittings from loosening during installation, a common problem on competing cylinders. Specifications: Volume: 130 cc - 7.93 cu.in Output force: 492 kg - 1085 lbs Inside diameter: 36 nm - 1.43" Stroke: 185 nm - 7.28" 3/8" fittings: For high pressure flex hose Bleed fittings: DN5 quick connect Kit Includes: UC130-SVS 2 UP25F-SVS 2x Oil 15

SilverSteer™ Outboard Hydraulic Tilt Steering System - UC130 V2 Specifically designed for high performance and high torque applications, the SilverSteer features a 1,500 psi helm and keyed bullhorns on the cylinder for maximum durability and minimal lost motion. Whether a bass boat, flat boat or tournament style offshore fishing boat, the SilverSteer™ will deliver smooth, responsive and precise steering. Adjustable boss style fittings allow precise hose routing without the risk of breaking the fittings by overtightening or leaking fittings from loosening during installation, a common problem on competing cylinders.

GoTech™ 1.0 Universal Front Mount Outboard Hydraulic Steering System For outboard single engine up to 115hp. Kit Contains: UP18 - Intermediate helm pump UC81-OBF - Front mount outboard cylinder OL 150 - Hydraulic oil - 2 litres KIT OB-GT-60 - Hose kit dia, 1/4" 6M(19.7") length

Atlas Micro Jacker Small Outboard Hydraulic Jack - 4" SMALLEST & LIGHTEST HYDRAULIC JACK ON THE MARKET For Small Outboards - Max Weight 425 lbs / Max Horsepower 115 HP Great For Shallow Water Boats – Gheenoes     River Runners – Jon Boats - Skiffs Get Out of Trouble Fast – Lifts in 8 Seconds Lightweight – Only 23 Pounds Fish “Skinny Water” With Confidence Self Contained Hydraulics Maximum outboard dry weight: 425 pounds Maximum outboard horsepower: 115 HP* Only Four (4) Inch Setback Clamp-On Motor Adapter Available (optional) Small Footprint – Only 14-5/8” Wide and 11-1/2” High Clamp-On Motor Adapter (part # AHJM-CMA-DP) allows you to mount smaller engines with clamp-on brackets to the ATLAS Micro Jacker, since they do not mount with bolts on the standard BIA engine hole pattern. Adjustment Specifications: With the Micro Jacker in place, you will have about 8.5” to work with in height. This includes 1.5” of adjustment at the transom, another 1.0” on the motor side, 1.0" of adjustment with the motor, and 5" of hydraulic lift with the Micro Jacker itself. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

El Outboard Steering Kit for Up To 150HP Motors 401 Manual Helm with Fitting Kit The heart of the Admiral Series is the HyDrive M402 helm unit. The 7-piston pumps are precision manufactured to standards and tolerances that are second to none. In-built lock valves, which eliminate torque feedback are standard. The light, smooth steering must be experienced to be appreciated. Designed as a complete Do It Yourself installation, everything you need is supplied including detailed instructions. You don’t even have to know anything about hydraulics! The Admiral Series 401 helm units offer improved internal efficiencies and unique assembly design, consolidating HyDrive Engineering‘s position as a world leader in hydraulic boat steering. Two years of design development and testing have resulted in these helms being selected as the standard helm supplied in all HyDrive steering kits. Features: Front-mount design for maximum appeal Improved internal efficiency Brass wheel nut and washer Stainless steel steering wheel shaft - not aluminum Anti-splash filler cap for rough conditions Unique assembly design for ease of service and maximum performance Stainless steel studs, nuts, and washer pre-fitted for convenience Highly efficient non-return valves for non-feedback of helm unit - eliminates all torque from the steering cylinder Ultra 15 Oil Quantity 2 - 1 Liter Bottles Features: For use in HyDrive Skipper and Admiral Series Hydraulic steering systems only Not for use in HyDrive 2000 Series Steering Systems This oil is compatible with HyDrive HF15, but should not be mixed with any other fluids N-8 - 49' Nylon Tube 3/8" Features: Semi-Rigid Nylon Tube at 3/8 Inch OD (49' Coil, You Cut to length to suit) Use with HP Compression Olive and Nut Fittings Supplied in HY EL O/B KIT Stainless Steel Tube & Rod for Up To 150HP Up To 150HP Outboard Specifications: Cylinder Tube = Stainless Steel Cylinder Tube Dia. = 1.33 Inches Cylinder Rod = Stainless Steel Cylinder Brackets = Stainless Steel Cylinder 1 " Nylok Nuts = Stainless Steel Cylinder End Caps = Cast Aluminum Cylinder Rod Stroke = 7-1/2 Inches Cylinder Type = Un Balanced Cylinder  Cylinder Volume Big Side Vol = 155 ccSmall side Vol = 115 cc Steering Wheel HO/HO = 5.5 and 4.1 Turns Total length Rod Compressed = 15.75 Inches Rod Extended = 23.00 Inches Cylinder Total Weight = 3.15 Pounds (1427 Grams)

HYCO 1.1 Front Mount OB System up to 175HP - Includes UP20 FM Helm, 2qts of Oil, UC95-OBF Cylinder Featuring the unique split tilt tube rod that allows for installation of the UC94 cylinder without removing the engine, the Hyco is an easy and affordable outboard hydraulic steering solution for boats with 150 horsepower and under. Coupled with the composite UP20 helm, the Hyco offers effortless steering with 5 turns lock to lock. And, it is applicable to almost all 2 and 4 stoke outboards engines. Kit Contains: UP20 FM Helm UC95-OBF cylinder OIL 15 - 2 Quarts

HYTECH 1.1 Front Mount OB System up to 175HP - Includes UP20 FM Helm, 2qts of Oil, UC95-OBF Cylinder & 40' Tubing The HYTECH steering kit featuring the unique split tilt tube rod that allows for installation of the UC94 cylinder without removing the engine. The HYTECH is an easy and affordable outboard hydraulic steering solution for boats with 175 horsepower and under. Coupled with the composite UP20 helm, the HYTECH offers effortless steering with 5 turns lock to lock. And, it is applicable to almost all 2 and 4 stroke outboard engines.  Kit Contains: UP20 FM Helm UC95-OBF cylinder OIL 15 - 2 Quarts 40' of cut to length tubing

Stainless Steel Tube & Rod for Up To 150HP Up To 150HP Outboard Specifications: Cylinder Tube = Stainless Steel Cylinder Tube Dia. = 1.33 Inches Cylinder Rod = Stainless Steel Cylinder Brackets = Stainless Steel Cylinder 1 " Nylok Nuts = Stainless Steel Cylinder End Caps = Cast Aluminum Cylinder Rod Stroke = 7-1/2 Inches Cylinder Type = Un Balanced Cylinder  Cylinder Volume Big Side Vol = 155 ccSmall side Vol = 115 cc Steering Wheel HO/HO = 5.5 and 4.1 Turns Total length Rod Compressed = 15.75 Inches Rod Extended = 23.00 Inches Cylinder Total Weight = 3.15 Pounds (1427 Grams)