|
OMC 400 type cable (Pre 1979). Stainless steel core. Stainless steel and brass fittings. Exceeds engine manufacturers specifications. 6" minimum bend radius.
|
64.99 |
|
|
2018 Jeep Wrangler JL A-Pillar Mount for 2 D-Series, D-SS, SR-M or Ignite Lights
The 2018 Jeep Wrangler JL can go anywhere that you can take it, shouldn’t its auxiliary lighting options do the same? The all new Wrangler JL A-Pillar mount by RIGID gives that extra lighting needed for those dark times.
With the ability to attach several different RIGID lighting options from the D-Series, D-SS, SR-M, or Ignite families, the RIGID Jeep Wrangler A-Pillar mount takes auxiliary lighting to a new level. These mounts are made from laser cut stainless steel and have been powder coated allowing for a clean sleek look. Own The Night with the RIGID mounts for your Jeep Wrangler JL.
Lights sold separately.
In the Box:
All Necessary Hardware
∗ Sold as a Pair
|
112.50 |
|
|
Xtreme® premium control cables provide smooth, easy action with minimum lost motion. Superior feel at the controls, especially in multi-station vessels. Patented splined core with ridges that allow a close fit with the cable's inner liner, but with minimum contact so the core glides back and forth smoothly. .34" super tough HDPE jacket for ultimate protection from the elements.
|
65.99 |
|
|
Replacement rotary steering cable with simple snap-in connection. Direct replacement for SSC61 and SSC72 cables. Stainless steel core.
|
158.99 |
|
|
Mercury/Mercruiser 600A type cable. Complete drop-in replacement cable for Mercury/Mercruiser engines. Stainless steel & brass fittings. Stainless cable wire. WHILE QUANTITIES LAST.
|
62.79 |
|
|
OMC 479 type cable (1979 & later). Complete drop-in replacement cable for OMC O/B and I/O's. Stainless steel and brass fittings. 6" minimum bend radius. WHILE QUANTITIES LAST.
|
62.99 |
|
|
Replacement cable for Mariner low horsepower engines when used with Mercury controls. Uses existing connection components. Also used for converting old Mercury control boxes to Japanese motors. Stainless & brass fitting, stainless cable wire.
|
75.99 |
|
|
Drop-in replacement cable for Mercury/Mercruiser engines using 600A type cable. Splined core allows easy movement and minimum lost motion. Designed for complex and/or long cable runs, or to simply create a superior feel. Stainless steel fittings and cable wire. 4" min. bend radius. Packed one per box.
|
61.99 |
|
|
Drop-in replacement cable for OMC outboard and I/O engines using 479 type cable. Splined core allows easy movement and minimum lost motion. Designed for complex and/or long cable runs, or to simply create a superior feel. Stainless steel fittings and cable wire. 4" min. bend radius. Packed one per box.
|
61.99 |
|
|
Drop-in replacement cable for engines with controls that accept cable with 10-32 threaded ends. Mercury Sport Jet requires connection kit #CA27319P for engine end. Stainless steel conduit fittings. 3" nominal travel. 4" minimum bend radius. Packed one per box.
|
63.99 |
|
|
Designed specifically to be used with late model Mercury 4000 series controls. Engineered to significantly reduce or eliminate cable "Wig-Wag", this design results in a significantly improved feel with less shifting effort. Improves the feel of the Mercury 4000 Series Controls. Nickel plated brass swivel tube.
|
73.99 |
|
|
3" travel, 10-32 thread stainless steel ends. Stainless 16 strand Lubri-Core wire for smooth operation. 6" minimum bend radius. Stainless steel rods, hubs, and end fittings. Covered core wires with moisture protective seals help protect against corrosion and lengthen cable life. UV resistant polyethylene outer jacket resists abrasion and withstands effects of salt water, chemicals, gasoline, and oil.
|
56.99 |
|
|
RJ45-M Ethernet Adapter Cable
RJ45-Yellow Round Ethernet adapter cable for Simrad NSO evo2 and Zeus2 displays.
|
22.98 |
|
|
2-Way Waste Manifold 12' Cable 1-1/2" Ports
2-way manifold with Whale Intelligent Control built in. The waste manifold can be used with a Whale Gulper pump to create a greywater disposal system. The manifold accepts two waste inputs and senses water through the wall. This relays information to the Gulper IC pump to turn on and pump the wastewater.
This Whale WM3884B IC manifold has 12 feet of cable and 1-1/2" ports.
Specifications:
Height: 115mm (4-1/2")
Length Cable: 12' Cable
Voltage: 12V - 24V DC
Width: 139mm
Hose Size Outlet: 25mm (1") & Inlet: 38mm (1-1/2")
Model: WM3884B
Depth: 102mm (4")
|
79.93 |
|
|
2-Way Waste Manifold - 12' Cable - 3/4" Ports
This manifold manages waste from multiple drains with intelligent control built in. A compact automatic system handles waste drainage from the two outlets. Must be used with Gulper® IC.
The two-way manifold IC is connected to a Gulper® IC. When the manifold senses water, it sends an electrical signal to the Gulper® IC, which evacuates the system. As the water level decreases, the electrical signal transmitted by the manifold will cease, and the Gulper® IC will continue to operate for a further 15 seconds before turning off.
IC – Intelligent Control Technology
At the heart of every Whale IC product lies innovative electronic control circuitry built in. This enables the IC sensor accessories to communicate directly with the IC pumps to control the performance. These accessories send signals to built-in intelligent software, which then controls the pumps to react as required.
Specifications:
Cable Length: 4m (12ft)
Inlet Hose Connections: 3/4" (19mm)
Outlet Hose Connections: 3/4" (19mm)
Control Voltage: 5V dc via Gulper® IC
Current Draw: Low power 0.01 Amps supply
Connectors: Deutsch® Connectors: Quick Connect Series 7 ways (directly onto Gulper® IC)
|
79.93 |
|