|
Depth range to 600ft and on plane readings up to 60mph. Automatic range and sensitivity adjustments for no-worry usage. Features polarized LCD display for easy viewing in any environment, dual depth alarms can be set to warn of depth changes, one touch alarm muting, user selected unit of measure (feet or meter) and keel offset designed to properly adjust depth readings. Dual-mount transducer can be transom mounted or internally glue mounted to hull. High speed transducer resolution of 7X per second. Includes 30' transducer cable length for small or large boat installations and two interchangeable faces (Black, White) and three bezels (Black, White, Chrome). Designed to match most Sierra gauge series.
|
169.99 |
|
|
DepthTrax In-Dash Digital Depth Gauge - Transom Mount
The DepthTrax 2B includes advanced sonar, depth alarm, and keel offset capabilities. With updated SONAR algorithms, the DepthTrax 2B reachs new depths. Able to reach depths of 600 ft and tuned for high speed performance, the DepthTrax 2B reaches deeper and performs faster than any depth finder.
The DepthTrax 2B delivers a combination of performance and affordability unrivaled in any other depth sounder.
Features:
Algorithmic programming significantly reduces false readings and produces unmatched precision
EasyTouch programming allows one-touch access to the user settings
User programmable keel offset automatically adjusts depth readings for vessels’ draft requirements
Selectable Imperial or Metric readout
Dual Upper and Lower depth alarms can be set throughout the full depth range
3-Stage Advanced Warning System™ clearly signals an alarm condition with an audible alarm, LED and LCD indicators with one-touch alarm muting
Displays air & water temperature in °F or °C
Automatic memory retention of all user settings
Removable face system - includes White & Black faceplates and White/Black trim rings
No glare, polarized LCD icon display with storage sun cover
SoftGlow™ backlit display and programming keys - low intensity, low temperature lighting prevents eye strain and condensation while providing unparalleled nighttime viewing
Technical Specifications:
Gauge Dimensions (Diameter x Depth) - 2" x 1.75" (51 x 45mm)
Screen Dimensions (Height x Width) - 1.65" x .87" (42 x 22mm)
Gauge Cut-out Size - 2"
Operating Temperature - 0 to 160° F (-18 to 71°C)
Depth Range - 2.5' to 600' (.7 to 180 M)
Transducer Type - Transom Mount
Transducer Frequency - 200kHz
Transducer Beam Angle - 14°
Transducer Cable Length - 30' (9 M)
Power Requirement - 12 - 14 VDC
In the Box:
Gauge
Bezel/Faceplate - Black and White
Display cover
Mounting hardware
Transducer - transom mount w/30' cable
Instruction manual
*Sold as an Individual
|
113.75 |
|
|
Digital Depth & Battery Gauge
The FL Digital Depth Indicator is the first digital display to show depth at all times when your Vexilar flasher is on while still being able to get the status of your battery with the touch of the button. The FL Digital Depth Indicator (model DD-100) gives anglers what they have been asking for, Digital Depth. Now you can easily and quickly attach the FL Digital Depth Indicator to your transducer cable from your FL series Flasher sonar and get an instant digital depth reading. Designed to fit in place of the popular D-130 or T-130 battery indicators, Vexilar has been selling for years. You can easily outfit your Pro Pack, Ultra Pack or Genz Pack with the DD-100.
The DD-100 not only gives you digital depth, but also gives you the battery status by pressing a button. When not in use, the DD-100 goes to sleep, so you no longer have to worry about draining your battery when not in use. Installation is easy. Simply unplug your transducer from the back of your Vexilar and plug into the DD-100 connector. Take the other end of the DD-100 and plug it into the back of your Vexilar. Attach the red power lead from the FL Digital Depth Indicator to the positive terminal post of your battery. A piggy-back terminal has been provided for easy connection to the Genz or Pro Pack. If you have an Ultra pack, please go to the Vexilar web site for detailed mounting instructions. Finally, place the FL Digital Depth Indicator where the old battery indicator was and attach with either plastic push pins or use a small bolt and lock nut.
Features:
Gives Any Vexilar Flasher the Ability to Show a Digital Depth Display
Can Be Used on Any Vexilar FL Series Flasher Ever Made, Including Older Hondex, Si-tex and Micronar FL-8's
Displays Battery Status By A Simple Push of a Button
Display Lighted for Use After Dark
Water Resistant & Easy Installation
Specifications:
Maximum Depth: 199 Feet
Power Draw OFF: 124uA
Power Draw ON: 21mA
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
50.40 |
|
|
DepthTrax 1H Handheld Depth Finder and Temperature Reader
The DepthTrax 1H is a powerful handheld depth finder that produces instant, accurate depth readings up to 300 feet and temperature readings accurate to within 1/10th of a degree. Fully waterproof and built to last, it’s the only handheld SONAR depth finder on the market.
Features:
Waterproof up to 200'
Depth reading from 2.5' to 300' (0.7-91.5M)
Read water or air temperature with up to 1/10th of a degree of accuracy
Shoot through the ice for accurate depth readings while ice fishing.
Backlit for nighttime viewing
Requires (1) 9V battery (not included)
Safety lanyard prevents accidental loss
Technical Specifications:
Dimensions - 2" x 2" x 8" (51 x 51 x 203mm)
Screen Size - 1.65" x .87" (42 x 22mm)
Operating Temperature - 0 to 160°F (-18 to 71 °c)
Depth Range - 2.5' to 300' (.7 to 90 m)
Waterproof Rating - IPX8 to 200 ft (60 m)
Battery - 9 Volt Alkaline (not included)
Battery Life - 25 Hours
Transducer Frequency - 200 kHz
Transducer Beam Angle -14°
In the Box:
Handheld depth finder & temperature reader
Wrist strap
Instruction manual
*Sold as an Individual
|
83.62 |
|
|
LPS-1 Handheld Digital Depth Sounder
The LPS-1 is simple to use. Just put it in the water, point and push the ON button. The depth or distance is digitally displayed for 10 seconds before automatically shutting off, with no risk of battery drain. A must for the outdoor enthusiast!
Take the compact, lightweight LPS-1 wherever you go: fly-in trips, ice fishing, canoe trips, remote mountain lakes, float tubing, scuba diving and more. For fishing, simply touch it to the surface of the water. For ice fishing, the signal will shoot through clear ice! When diving, use it to check depths or distances to any object under water: reefs, sunken wrecks even the distance to the surface. Waterproof down to 150'.
Features:
200 kHz, 22° built-in transducer
Reads depth from 1.8 to 200 feet
Backlit display for night use
Automatic shutoff
Uses one 9 volt battery
Floats
Specifications:
Color: Nautical Yellow
Weight: 7 oz.
Length: 7-3/4"
Voltage: 9 volts
Max Range: 200 feet
Power: 25 Watts
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
114.00 |
|
|
Plastic Thru-Hull, Digital Depth and Temp Sensor (7-Pin)
200 Watts
235 kHz
Plastic Thru-Hull
Depth and Temperature (+/ - 1 degree )
10-Meter Cable with 7-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
600.00 |
|
|
Plastic Transom Mount, Digital Depth, Speed & Temp Sensor (7-Pin)
200 Watts
235 kHz
Plastic Transom Mount
Depth, Speed and Temperature (+/ - 1 degree )
10-Meter Cable with 7-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
578.18 |
|
|
Bronze Thru-Hull, Digital Depth and High-Precision Temp Sensor (7-Pin)
200 Watts
235 kHz
Bronze Thru-Hull
Depth and High-Precision Temperature ( + / - .02 degree )
10-Meter Cable with 7-Pin Connector
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
752.72 |
|
|
Bronze Thru-Hull, Digital Depth and High-Precision Temp Sensor, with 7 Inch Stem and High Speed Fairing Block (7-Pin)
Features:
200 Watts
235 kHz
Bronze Thru-Hull with 7" Stem
Depth and High-Precision Temperature ( + / - .02 degree )
10-Meter Cable with 7-Pin Connector
Fairing Block and Installation Materials Included
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
883.63 |
|
|
235DST-MSE Bronze Thru-Hull, Digital Depth, Speed & Temp Sensor - 7-Pin
Features:
200 Watts
235 kHz
Bronze Thru-Hull
Depth, Speed and Temperature (+/- 1°)
10-Meter Cable with 7-Pin Connector
Can be flush mounted on a hull with up to a 22° dead rise
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
534.54 |
|
|
DepthTrax In-Dash Digital Depth & Temp Gauge - Transom Mount
The DepthTrax 2BX includes all the advanced sonar, depth alarm, and keel offset capabilities of the DepthTrax 2B, but also integrates dual temperature displays and an AIRMAR®, ultra-sensitive, high-performance transom mount transducer. With a simple press of a button on the DepthTrax 2BX display produces instant access to water or air temperature readings via integrated sensors in both the head unit and the transducer.
The DepthTrax 2BX delivers a combination of performance and affordability unrivaled in any other depth sounder.
Features:
Algorithmic programming significantly reduces false readings and produces unmatched precision
EasyTouch programming allows one-touch access to the user settings
User programmable keel offset automatically adjusts depth readings for vessels’ draft requirements
Selectable Imperial or Metric readout
Dual Upper and Lower depth alarms can be set throughout the full depth range
3-Stage Advanced Warning System™ clearly signals an alarm condition with an audible alarm, LED and LCD indicators with one-touch alarm muting
Displays air & water temperature in °F or °C
Automatic memory retention of all user settings
Removable face system - includes White & Black faceplates and White/Black trim rings
No glare, polarized LCD icon display with storage sun cover
SoftGlow™ backlit display and programming keys - low intensity, low temperature lighting prevents eye strain and condensation while providing unparalleled nighttime viewing
Technical Specifications:
Gauge Dimensions (Diameter x Depth) - 2" x 1.75" (51 x 45mm)
Screen Dimensions (Height x Width) - 1.65" x .87" (42 x 22mm)
Gauge Cut-out Size - 2"
Operating Temperature - 0 to 160° F (-18 to 71°C)
Depth Range - 2.5' to 600' (.7 to 180 M)
Transducer Type - Transom Mount
Transducer Frequency - 200kHz
Transducer Beam Angle - 14°
Transducer Cable Length - 30' (9 M)
Power Requirement - 12 - 14 VDC
In the Box:
Gauge
Bezel/Faceplate - Black and White
Display cover
Mounting hardware
Transducer - transom mount w/30' cable
Instruction manual
*Sold as an Individual
|
135.79 |
|
|
DepthTrax Dash Digital Depth and Temp Gauge - Thru-Hull
The DepthTrax 2BX includes all the advanced sonar, depth alarm, and keel offset capabilities of the DepthTrax 2B, but also integrates dual temperature displays and an AIRMAR®, ultra-sensitive, high-performance thru-hull transducer. With a simple press of a button on the DepthTrax 2BX display produces instant access to water or air temperature readings via integrated sensors in both the head unit and the transducer.
The DepthTrax 2BX delivers a combination of performance and affordability unrivaled in any other depth sounder.
Features:
Algorithmic programming significantly reduces false readings and produces unmatched precision
EasyTouch programming allows one-touch access to the user settings
User programmable keel offset automatically adjusts depth readings for vessels’ draft requirements
Selectable Imperial or Metric readout
Dual Upper and Lower depth alarms can be set throughout the full depth range
3-Stage Advanced Warning System™ clearly signals an alarm condition with an audible alarm, LED and LCD indicators with one-touch alarm muting
Displays air & water temperature in °F or °C
Automatic memory retention of all user settings
Removable face system - includes White & Black faceplates and White/Black trim rings
No glare, polarized LCD icon display with storage sun cover
SoftGlow™ backlit display and programming keys - low intensity, low temperature lighting prevents eye strain and condensation while providing unparalleled nighttime viewing
Technical Specifications:
Gauge Dimensions (Diameter x Depth) - 2" x 1.75" (51 x 45mm)
Screen Dimensions (Height x Width) - 1.65" x .87" (42 x 22mm)
Gauge Cut-out Size - 2"
Operating Temperature - 0 to 160° F (-18 to 71°C)
Depth Range - 2.5' to 600' (.7 to 180 M)
Transducer Type - Thru-Hull
Transducer Cut-out Size - 2"
Transducer Frequency - 200kHz
Transducer Beam Angle - 14°
Transducer Cable Length - 30' (9 M)
Power Requirement - 12 - 14 VDC
In the Box:
Gauge
Bezel/Faceplate - Black and White
Display sun cover
Mounting hardware
Transducer - thru-hull w/30' cable
Instruction manual
*Sold as an Individual
|
154.80 |
|
|
DST-810MSF Bronze Thru-Hull, Digital Depth, Speed, Temp Sensor, NMEA2000
Airmar B617V Housing Style Transducer
The DST-801MSF offers depth, speed, and temperature in a single, 51 mm (2”) fitting. Only one hole through the hull simplifies the installation — an attractive feature for boat builders and boat owners alike. Patented, speed-signal-processing and upgraded 5 Hz (5X per second) speed-through-water enhancements provide excellent paddlewheel accuracy below 5 knots (6 MPH) and smooth linear output at all vessel speeds. The transducer’s wide, fan-shaped, fore-aft beam is able to find bottom even when installed on steep deadrise hulls or heeling sailboats. You also get true water-temperature readings with the DST-810MSF's reliable temperature sensor.
The DST-810MSF features a new Wireless connectivity to Airmar's CAST App, allowing you to calibrate the sensor, add depth offsets, and more.
Features:
Depth, speed, and temperature in one compact bronze housing
Fast-response temperature sensor provides ±0.2°C (±0.1°F) accuracy
Weight: 1.6 kg (3.5 lb)
Acoustic Window: Urethane Hull
Deadrise: Up to 22°
Data Update Rate: 1 per second
Minimum Sounding Depth: 0.5 m (1.6’)
Maximum Sounding Depth: 70 m (230’)
Pressure Rating: 3 m (10’)
Pulse Rate: 20,000 p/nm* (5.6 Hz per knot)—*p/nm = pulses per nautical mile
Smart Sensor Supply Voltage at 100% Sound Power Output: 11.5 VDC to 25 VDC
Supply Current: 40 mA
Standard Cable Length: 6m
NMEA 2000® Load Equivalency Number (LEN): 4
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
453.34 |
|
|
Universal D Size Ball Mount with Short Arm for 9"-12" Fishfinders and Chartplotters
The RAM-D-115-C consists of a base with a 2.25” diameter D size ball, a short arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more.
Overall Length: 7.325"
Weight Capacity: Up to 10 lbs.
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" Rubber "D" Ball Size
|
104.29 |
|
|
Universal D Size Ball Mount with Long Arm for 9"-12" Fishfinders and Chartplotters
The RAM-D-115-E consists of a base with a 2.25” diameter D size ball, a long arm and a 6.25” x 2” marine electronic plate with a D size ball for supporting larger devices. This marine electronic plate contains different combinations of pre-drilled holes and is a direct fit for 9”-12” fishfinder gimbal brackets. Supports devices such as the Lowrance HDS-9 Gen2 Touch, Garmin GPSMAP 7407 and more.
Overall Length: 15.2"
Weight Capacity: Up to 10 lbs.
Material: Powder Coated Marine Grade Aluminum
Ball Size: 2.25" Rubber "D" Ball Size
|
147.10 |
|