OEM style featuring clean-looking black dials with white and red graphics and through-dial and perimeter lighting for optimum readability. Scratch resistant domed glass lens.

OEM Style instruments with crisp tan details and fire orange pointer tip, providing a unique look for any dash. Scratch resistant domed glass lens with combined red through-dial and white perimeter lighting for great readability day or night.

Stylish stainless steel bezel design, black on white graphics. Domed glass sheds water and resists scratching. A comprehensive family of instruments for outboards, stern drives and inboards, including diesels. Lido instruments feature crisp white dials and fire-orange pointer tips. Red through-dial and white perimeter lighting for great night readability. NOTE: Mariner 30 & 40 HP 2-cylinder engines require a module (Merc. part no. 17461A2) when using Lido tachometer.

OEM gauges for outboards, stern drives and gas powered inboards. Light gray dials with clean black numerals, and black pointer hub with white staff. Scratch resistant domed glass lens with black bezel. Combined blue through-dial with white perimeter lighting provides a unique look and high visibility.

Ideal for outboards and stern drives. Features polished stainless steel bezel, brushed aluminum dial with black pointer, scratch resistant curved lens and perimeter lighting. US & metric scales with ISO symbols where appropriate. 3" gauge requires 3-13/32" cutout, 2" gauge requires 2-1/8" cutout.

Walbro FRB-13-2 Fuel Pump 6-8 Psi 12V Pressure: 6.0 - 8.0 psi Service Life: 18,000+ hr Magnetic Trap: Yes Minimum Flow Rate: 43 gph Dry Lift: 48" Current Draw: 2.3 Amp Inlet/Outlet: 1/4-18 NPSF Fuse: 5A Inlet Filter Screen: 70 Micron Weight: 1.83 lb Voltage: 12V DC Outlet Check Valve: None   The FRB is an advanced electric fuel pump with internal circuitry allowing it to operate at a variable frequency. When turned on, it will cycle as long as there is a demand for fuel, but when fuel demand decreases, the pump slows down as it builds pressure in the fuel delivery line - until the pump's rated maximum pressure is reached, and the pump stops. These FRB pumps are especially suitable for applications where battery life, low noise, and best durability are important. Not recommended for applications such as heater or stove systems as output pressures are too high. For heater and stove fuel pumps, use the lower pressure Walbro FRD Series. See Related Products, below. The FRB is designed to serve as a primary pump (replacing a mechanical fuel pump) or as an auxilliary fuel pump (assisting the existing pump) for internal combustion engines. A common application is supplying fuel to the those diesel refrigeration units mounted high on tractor-trailer trucks. These pumps incorporate a new piston mechanism which, unlike rubber diaphragms, is not affected by modern, high-tech fuel blends. • Pump cycles only when fuel is demanded - so the pump cycles on and off • The non-adjustable maximum output pressure is factory pre-set in the ranges specified in the table, below • Continuous duty life (diesel fuel): >18,000 hours • Can run dry for up to 4 hours • Flow rates as high as 60 gph, but 30 gph is a more typical maximum • Compatible with all commercially available pump grade gasoline, gasoline-alcohol blends, diesel, and bio-diesel fuels • Self-priming to 4 feet • Current draw averages less than 2 amps • USCG 16623-1 and 16623-2 approved; ignition protected • Anodized, corrosion protection coating passes 1,000 hr salt spray test - suitable for marine applications • Replaceable internal 70 micron mesh filter • Magnetic trap for ferrous contaminants • Inlet (lower, side)/Outlet (top): 1/4-18 NPSF (Dryseal American National Standard Straight Pipe Thread) — will accept NPT tapered fittings without leaking, thread sealant recommended • Dimensions: 5.83"H x 2.76"Dia. • Note - a suffix number (typically -1 or -2) in part number refers to type of packaging • Made in USA NOTE — Although the included instructions indicate that FRB pumps are supplied with hose clamps, at this time (5/8/13), these pumps do not include any installation fittings. Technical Selecting among the Walbro FR Series electric fuel pumps: • All the FR electric pumps provide fuel until the fuel demand decreases, or flow is restricted - but they have different mechanisms for doing so. FR pumps will cycle (pump) until they build up the pressure (head) in the outflow line - with an accompanying decrease in fuel flow - and reach their factory preset maximum pressure. At this point, constant frequency pumps like the FRA will continue cycling - but no fuel will flow. Variable frequency pumps, like the FRB and FRD, will slow and eventually stop cycling as the pressure builds. If the pressure on the outflow side of the pump drops, both types of pump will start supplying fuel again. • Choosing an FR Series pump is often less dependent on the application, and more a matter of user preference: — FRA pumps are lower cost, basic models. They have no built-in filter, and their constant cycling means electric current draw is constant - regardless of output, they are always making noise, they typically have a shorter lifespan (higher wear), and they can wear unevenly as the stroke can be shortened when operating near their maximal pressure. — FRB and FRD pumps have a more expensive variable frequency circuit board, always use their full stroke length - so wear is evenly distributed, do not always operate at full capacity/maximal cycling — so less wear, longer life, less noise, and lower average current draw. Additionally, the FRB models include a built-in/replaceable 70 micron mesh filter, so the user doesn't need to supply a pre-filter.   • What the FR fuel pump is designed to do: — In carbureted applications - The FRA and FRB fuel pumps self-regulate to their maximum output pressure when the carburetor bowl is full, and respond to float movement in the carburetor as required. When the engine demands more fuel, the pump increases its flow rate. When the engine demand drops, the pump reduces its flow rate. — In diesel applications - The FRA and FRB pumps will deliver fuel to the diesel injector pump, assuring a positive pressure at the injector pump inlet. These pumps are designed to refill diesel filters after service or replacement. — In transfer applications, including fuel polishing, FRA and FRB pumps run continuously, as long as electrical power is supplied to the pump, and output back pressure is low. — In diesel heater and stove applications, the task-specific FRD pumps will slow their cycling rate to deliver only the fuel required by the stove fuel metering valve ("carburetor"). FRD pumps can also fill day tanks in gravity feed installations. • Complete list of approved fuels for FR pumps: — Unleaded regular gasoline, premium gasoline, gasoline-alcohol blends, diesel fuel, bio-diesel, Stoddard solvent, E85.  

Battery Fuel Gauge - Marine Dual Read Battery Monitor - 12V System - 15' Battery Cable The Pro Charging Systems (PCS) Battery Fuel Gauge solves one of the most common complaints about battery status indicators currently on the market— that most battery status indicators are not accurate or reliable. Many employ old technologies. (PCS) battery fuel gauges change that paradigm. Think of the old “Motorola Brick Phone” from the late 1980s versus today’s iPhone. PCS battery fuel gauges measure a battery’s energy state with precision and accurately display the information. At a glance, the gauge is easy to read and understand. Since the system utilizes intuitive technology, it fits and adapts to a wide range of applications. We take great pride in the performance, quality, and versatility of our products backed by exceptional customer service. Features: Marine Dual Read Battery Monitor 12V System 15' Battery Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Battery Fuel Gauge - Marine Dual Read Battery Monitor - 12V/24V System - 15' Battery Cable The Pro Charging Systems (PCS) Battery Fuel Gauge solves one of the most common complaints about battery status indicators currently on the market— that most battery status indicators are not accurate or reliable. Many employ old technologies. (PCS) battery fuel gauges change that paradigm. Think of the old “Motorola Brick Phone” from the late 1980s versus today’s iPhone. PCS battery fuel gauges measure a battery’s energy state with precision and accurately display the information. At a glance, the gauge is easy to read and understand. Since the system utilizes intuitive technology, it fits and adapts to a wide range of applications. We take great pride in the performance, quality, and versatility of our products backed by exceptional customer service. Features: Marine Dual Read Battery Monitor 12V/24V System 15' Battery Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Battery Fuel Gauge - Marine Dual Read Battery Monitor - 12V/36V System - 15' Battery Cable The Pro Charging Systems (PCS) Battery Fuel Gauge solves one of the most common complaints about battery status indicators currently on the market— that most battery status indicators are not accurate or reliable. Many employ old technologies. (PCS) battery fuel gauges change that paradigm. Think of the old “Motorola Brick Phone” from the late 1980s versus today’s iPhone. PCS battery fuel gauges measure a battery’s energy state with precision and accurately display the information. At a glance, the gauge is easy to read and understand. Since the system utilizes intuitive technology, it fits and adapts to a wide range of applications. We take great pride in the performance, quality, and versatility of our products backed by exceptional customer service. Features: Marine Dual Read Battery Monitor 12V/36V System 15' Battery Cable This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Kronos 2" Fuel Level Gauge (E-1/2-F) Polished Stainless Steel bezel, flat glass lens, perimeter lighted spun aluminum dial with Gold and Black graphics. Gold increments and Logo on dial are Embossed.  All instruments include two piece Newport pointer with White hub. Fuel Level gauge operates by sending a low amperage current through the gauges's meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel. 2" - Hole Size: 2.0625" (53mm) Specifications: Flat Scratch Resistant Lens Polished Stainless Steel bezel LED Illuminating around the Perimeter of the Dial Newport style White Pointer Factory P/N GP7683 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

Platinum 2" Fuel Level Gauge (E-1/2-F) Faria Beede’s Platinum Series Instruments feature spun aluminum gauge dials with custom graphics and a polished stainless steel bezel providing a rugged, elegant look.   All Platinum Series gauges feature Faria's revolutionary domed glass Fog-Resistant lens. These lenses shed condensation and resists scratching and other types of fouling common in the marine environment.   Fuel Level gauge operates by sending a low amperage current through the gauges meter to ground via a sending unit with variable resistance. The resistance of the sending units increase or decrease with the changes in pressure, temperature, etc... As the sender's resistance varies, the amount of current allowed to flow through it to ground changes and the meter deflects, showing the level of fuel. 2" - Hole Size: 2.0625" (53mm) Specifications: Domed Glass Anti-fog, Scratch Resistant Lens Stainless Steel Bezel Blue LED Illuminating around the Perimeter of the Dial Illuminated Backlit Fire-Orange Tip Pointer Factory P/N GP5088 *Sold as an Individual **Gauge Cover not Included This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

OEM Style instruments with crisp tan details and fire orange pointer tip, providing a unique look for any dash. Scratch resistant domed glass lens with combined red through-dial and white perimeter lighting for great readability day or night.

Stylish stainless steel bezel design, black on white graphics. Domed glass sheds water and resists scratching. A comprehensive family of instruments for outboards, stern drives and inboards, including diesels. Lido instruments feature crisp white dials and fire-orange pointer tips. Red through-dial and white perimeter lighting for great night readability. NOTE: Mariner 30 & 40 HP 2-cylinder engines require a module (Merc. part no. 17461A2) when using Lido tachometer.

Stylish stainless steel bezel design, black on white graphics. Domed glass sheds water and resists scratching. A comprehensive family of instruments for outboards, stern drives and inboards, including diesels. Lido instruments feature crisp white dials and fire-orange pointer tips. Red through-dial and white perimeter lighting for great night readability. NOTE: Mariner 30 & 40 HP 2-cylinder engines require a module (Merc. part no. 17461A2) when using Lido tachometer.

Battery Fuel Gauge - DeltaView® Link Compatible - Rectangle - 36V System (3-12V Batteries, 6-6V Batteries) The Pro Charging Systems (PCS) Battery Fuel Gauge (BFG) measures your battery’s energy state with unparalleled precision and accurately displays the information with easy to read color coded LEDs. Our BFGs are DeltaView® Link (DVL) compatible which lets you to monitor the state of charge of your batteries right from your iOS™ or Android™ mobile device. Since our BFG uses intuitive technology, it fits and adapts to a wide range of applications. We take great pride in the performance, quality and versatility of our products backed by exceptional customer service. 2.1" x 1.25" Cable Length:13.0’ Features: Nine LED array shows level of battery pack depletion LED array flashes while charging the battery pack Low Battery Voltage LED Indicator - Red indicator flashes warning and stays on when charging is required Status self-adjusts while charging is in progress DeltaView® Link App compatible to conveniently check the status of your battery pack from your wireless device Rugged PC ABS polymer case/water resistant design For use with Lead Acid (Wet Cell) and AGM batteries Installation is simple and requires a 2 inch diameter cutout Accurately Displays Battery Pack State/Charge Status With DVL - View Charge Status From Your Wireless Device TROUBLE FREE — Easy Installation - Connect It and Forget It! Advanced Microprocessor Constantly Evaluates Battery Pack State Durable, Water Resistant - Made in the USA and Built To Last Used in Many Applications Such As: Golf Carts Hunting Buggies Electric Utility Vehicles LSVs Aerial Lifts Lift Trucks Scrubbers Lawn Equipment Emergency Vehicles Boats and More... This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.