|
Sharp white and blue graphics on a black dial background. Very low-profile bezel follows lens curve to keep water from trapping. Rugged domed glass sheds water and is scratch-resistant.
|
61.99 |
|
|
POD I Universal No-Drill™ Vehicle Mount with 24" Rigid Aluminum Rod & 1.5" Diameter Ball Round Adapter Base
The RAM POD I, universal no-drill™, vehicle mount is the latest in the Mobile In-Car range from RAM. This RAM POD I allows you to mount a light to medium weight item in a car safely and securely.
Features:
Installation Instructions: At right angles to the base of the flexible 24" long leg is a foot with a mounting hole. Simply place the hole into the passenger seat mounting bolt and adjust the mount to the required height with the flexible leg. The rigid flexible arm will hold everything you need safely and securely.
Material: Powder Coated Marine Grade Aluminum
Ball Size: 1.5" Rubber Ball Size
Note: The "U" in the part number reflects product packaged in poly bag
|
55.67 |
|
|
Chesapeake White SS 2" Digital Hourmeter - (10,000 Hours)
Perimeter-lighted White dial with stylish Blue and White graphics, polished stainless steel bezel, contoured White pointer and domed glass lens.
Hourmeter operates by applying battery voltage across the gauge's register motor to ground. The register increments increase when the key switch in on. Route power through a normally open Oil Pressure switch to count "engine running" hours.
2"- Hole Size: 2.0625" (53mm)
Specifications:
Anti-scratch glass lens
Plastic Cases for corrosion resistance and long life
12 VDC negative ground
Can be adapted for 24 VDC systems
Operating Range - 0 to 10,000 Hours
Factory P/N MH0241
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
56.40 |
|
|
Euro Black 2" Digital Hourmeter Gauge
Perimeter-lighted Black dial with bold White graphics, Black aluminum bezel, contoured White pointer and flat glass lens.
Hourmeter operates by applying battery voltage across the gauge's register motor to ground. The register increments increase when the key switch in on. Route power through a normally open Oil Pressure switch to count "engine running" hours.
2" - Hole size: 2.0625" (53mm)
Specifications:
Anti-scratch glass lens
12 VDC negative ground
Can be adapted for 24 VDC systems
Factory P/N MH0242
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
49.99 |
|
|
Newport SS 2" Digital Hourmeter
The Newport Stainless Steel (SS) family of marine gauges is a classic style of gauge, engineered to be the new Modern Retro.
Designed with the latest fog resistant features, this Retro Style gauge far surpasses all expectations. Perimeter lighting makes reading these gauges easy to read Day/Night.
Features:
Perimeter lighted Retro White Dial
Black and Gray Graphics
Domed fog resistant lens
Two-piece Black pointers
Hand-polished Stainless Steel bezel
Studded connection for ring terminals
Red illuminated edge-lighting
Technical Specifications:
Operating Range - 0 to 10,000 Hours
2.06" (53 mm) Mounting hole
Operating Voltage - 12/32 V
In the Box:
Gauge
Mounting Hardware
Installation Manual
Factory P/N MH0247
*Sold as an Individual
**Gauge Cover not Included
This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.
|
62.87 |
|
|
LightArmor Plug-In Base - 2 Pin - Black - Round
INTRODUCING LIGHTARMOR PLUG-IN BASES, a new line of light bases designed for premium performance, styling, and durability. Across the entire product line, you get the intelligent engineering that LightArmor is known for.
A Sure Fit
The new Light Armor Plug-In Light Bases have a threaded design feature that fits perfectly with the threaded locking collar now offered across the entire line of Attwood Pole Lights. This unique system ensures a tight and secure fit that prevents annoying rattling while underway or trailering
Key Features:
Threaded Locking System for a secure fit
Unique cover design Stays secure while underway or trailered
Low-profile prevents water from pooling on top surface
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
13.55 |
|
|
Rail Base Fitting 2-3/4" Round Base 30° 316 Stainless Steel - 1" OD
These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three FH fasteners (not included).
*Stainless tubing with a wall thickness of 0.049”
|
18.29 |
|
|
Rail Base Fitting 2-3/4" Round Base 45° 316 Stainless Steel - 1" OD
These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three FH fasteners (not included).
*Stainless tubing with a wall thickness of 0.049”
|
19.90 |
|
|
Rail Base Fitting 2-3/4" Round Base 60° 316 Stainless Steel - 1" OD
These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three FH fasteners (not included).
*Stainless tubing with a wall thickness of 0.049”
|
18.97 |
|
|
Rail Base Fitting 2-3/4" Round Base 90° 316 Stainless Steel - 1" OD
These Round Rail Base Fittings include set screws where appropriate. Set screws can be purchased separately (299999-1). Requires 1/8" Allen wrench to install. Constructed of corrosion resistant investment cast 316 stainless steel. Installs with three FH fasteners (not included).
*Stainless tubing with a wall thickness of 0.049”
|
17.53 |
|
|
Solid black plastic construction. Use in 1/2" dia. mounting hole. Includes collar, bezel, and nut for mounting. 1/4" blade terminals. 15 amps @ 12 VDC. 1" black plastic handle.
|
10.19 |
|
|
D Size 2.25" Ball Mount with 2 - 3.68" Round Plate & Medium Length Double Socket Arm
The RAM-D-101U consists of (2 qty) 3.68" diameter round bases and STANDARD length double socket arm. The 3.68" diameter round bases have pre-drilled holes, including two holes at 180 degrees and three holes at 120 degrees. Designed into the mount is a 2.25" diameter rubber ball and socket system with adjustment points at both socket ends of the arm.
Weight Capacity:
Up to 15 lbs.
Ball Size:
2.25" Rubber Ball Size
Material:
Powder Coated Marine Grade Aluminum
Note:
The "U" in the part number reflects product packaged in poly bag.
Weight:
3.95 lbs.
|
124.86 |
|
|
2.5" Composite Round Base w/AMPS Hole Pattern & 1.5" Ball
The RAP-202U consists of a 1.5" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
Material:
High Strength Composite
Ball Size:
1.5" Rubber Ball Size
Note:
The "U" in the part number reflects product packaged in poly bag.
|
9.56 |
|
|
RAM 2.5" Composite Round Base w/1" Ball
Part #: RAP-B-202U
The RAP-B-202U contains a 1" diameter rubber ball connected to a flat 2.5" diameter base. This mount has pre-drilled holes, including the universal AMPS hole pattern.
Material:
High Strength Composite
Ball Size:
1" Rubber Ball "B" Size
|
6.29 |
|
|
6mm Eye Nut - 1/2" Diameter
Features:
A complete range of single-piece forged products for fastenings applications
Outstanding breaking loads
Available in different sizes
Applications:
Various fastening applications
Towing application
Waterskiing lines attachment
Specifications:
Materials: 316L stainless steel grade
Breaking load: (lb) 3300 / (kg) 1500
Weight: (lb) 0.049 / (g) 22
Dimensions:
A: (inch) M6 x 100 / (mm) M6 x 100
B: (inch) 33/64" / (mm) 13
C: (inch) 1 1/16" / (mm) 27
D: (inch) 15/64" / (mm) 6
E: (inch) 43/64" / (mm) 17
Caption:
Working Load (WL): For nautical applications
Working Load Limit (WLL): For industrial applications only. The safety factor is 5 times the breaking load. WLL = Breaking load / 5
*Sold as an Individual
|
17.04 |
|