|
JMP Marine Engine Cooling Raw Water Pump JPR-JD25UH
Product Information & Specs:
Uses JMP Flexible Impeller p/n: 7400-01K
Port Type: 1" Pipe
Pump Weight (approx): 6.25 LBS (3.85 KG)
Shaft Type: Spline Drive (9 Splines)
Heavy Duty Marine Grade Casting
Marine Grade Shaft (3X Series Non-Magnetic)
Screw with Hex Head / Driver
O-Ring End Cover Packing
High Performance Impeller
High Flow Capacity
Fast Flow Velocity
Forged Cam
This JMP Pump Replaces the following pumps
Replaces Genuine John Deere Pump p/n(s): RE535944, RE503068, RE525563
Replaces Johnson Pump p/n(s): 10-24753-01, 10-24907-01 (F7B-9)
Replaces Onan Pump p/n: 132-0435
For John Deere Engine Model(s): 4045DFM50, 4045DFM70, 4045TFM50, 4045TFM75, 4045TFM85, 6068SFM50,6068TFM50, 6068TFM75, 6068TFM76
Fits Kohler Engine Model(s): 40E02/33EF02, 65E02/55EF02, 30E02/20EF02, 99E02/80LF02
Internally Parts are Compatible to Genuine: NO Changes have been made to End Cover, O-Ring for Cover,Cover Screw, Cam, Wear Plate, Oil Seal, Mechanical Seal, Shaft for Better Quality & Performance
Major Service Kit (All Internal Parts): JSK0076 (Sold Separately)
Minor Service Kit: JSM0024 (Sold Separately)
|
518.99 |
|
|
Jabsco Flexible Impeller Pedestal Pump Eng Cooling Pump
FEATURES
Pump Body:
Brass, Low Profile Verson
Port Size:
3/8" BSP or
3/8" NPT
Flow:
Nominal 10 Litres/min (2.2 gallons/min) at 1500rpm
Impeller:
Neoprene
Shaft Seal:
Carbon/Ceramic Mechanical
Shaft:
Stainless Steel 12mm
APPLICATIONS / CHARACTERISTICS
Marine: Engine Cooling, Bilge Pumping, Water Circulation.
Industrial: Circulating and Transferring, Velocity Mixing.
Farming: Pumping Water for Stock, Liquid Ballast Transfer.
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 1.5m (4.9ft).
Jabsco Flexible Impeller Pedestal Pump 3/8" NPT Low Profile
|
307.19 |
|
|
Jabsco Flexible Impeller Pedestal Pump Brz Ped
FEATURES
Pump Body:
Brass, Low Profile Verson
Port Size:
3/8" BSP or
3/8" NPT
Flow:
Nominal 10 Litres/min (2.2 gallons/min) at 1500rpm
Impeller:
Neoprene
Shaft Seal:
Carbon/Ceramic Mechanical
Shaft:
Stainless Steel 12mm
APPLICATIONS / CHARACTERISTICS
Marine: Engine Cooling, Bilge Pumping, Water Circulation.
Industrial: Circulating and Transferring, Velocity Mixing.
Farming: Pumping Water for Stock, Liquid Ballast Transfer.
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 1.5m (4.9ft).
Jabsco Flexible Impeller Pedestal Pump 3/8" British Standard Pipe Threads, Low Profile
|
383.21 |
|
|
Jabsco Pump Brz Ped 020 Mech
FEATURES
Pump Body:
Brass, High Profile Verson
Port Size:
3/8" BSP or
3/8" NPT
Flow:
Nominal 10 Litres/min (2.2 gallons/min) at 1500rpm
Impeller:
Neoprene
Shaft Seal:
Carbon/Ceramic Mechanical
Shaft:
Stainless Steel 12mm
APPLICATIONS / CHARACTERISTICS
Marine: Engine Cooling, Bilge Pumping, Water Circulation.
Industrial: Circulating and Transferring, Velocity Mixing.
Farming: Pumping Water for Stock, Liquid Ballast Transfer.
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 1.5m (4.9ft).
Jabsco Flexible Impeller Pedestal Pump 3/8" British Standard Pipe Threads, High Profile
|
395.92 |
|
|
Jabsco Flexible Impeller Pedestal Pump
FEATURES
Pump Body:
Brass, High Profile Verson
Port Size:
3/8" BSP or
3/8" NPT
Flow:
Nominal 10 Litres/min (2.2 gallons/min) at 1500rpm
Impeller:
Neoprene
Shaft Seal:
Carbon/Ceramic Mechanical
Shaft:
Stainless Steel 12mm
APPLICATIONS / CHARACTERISTICS
Marine: Engine Cooling, Bilge Pumping, Water Circulation.
Industrial: Circulating and Transferring, Velocity Mixing.
Farming: Pumping Water for Stock, Liquid Ballast Transfer.
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 1.5m (4.9ft).
Jabsco Flexible Impeller Pedestal Pump 3/8" NPT High Profile
|
384.05 |
|
|
Jabsco Flexible Impeller Pedestal Pump 3/4" Vert Port Ped Mt
FEATURES
Pump Body:
Bronze, Pedestal Mount
Port Size:
3/4" NPT Internal
Flow:
Nominal 40 Litres/min (10.6 gallons/min) at 1500rpm
Impeller:
Neoprene
Shaft Seal:
Carbon-Ceramic Face Type
Shaft:
Stainless Steel
APPLICATIONS / CHARACTERISTICS
Marine Engine Cooling, Circulating, Pumping Bilges, Transfers, Washdowns, Sump Drainage, Spill Returns.
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock. Self-priming from dry up to 2.4m (7.8ft).
Jabsco Flexible Impeller Pedestal Pump, 3/4" NPT Ports, 1/2" Diameter Shaft with 1/8" Key, Neoprene Impeller
|
735.59 |
|
|
JMP Marine JSM0024 Minor Service Kit
Services Pump: JPR-JD25UH John Deere Replacement Pump
JSM0024 JMP Marine John Deere Engine Cooling Raw Water / Seawater Pump Minor Service Kit
Please Note:
JSM0024 used ONLY for pump JPR-JD25UH
Cannot be used in Genuine OEM Pumps. Internal changes made to pump parts for better quality and performance vs OEM.
Kit Includes:
7400-01 (FLEXIBLE IMPELLER) - QTY:1
MCSSET0008 (MECHANICAL SEAL SET) - QTY:1
ORG0013 (END COVER O-RING) - QTY:1
COV0003 (END COVER) - QTY:1
BOL0080 (END COVER SCREWS) - QTY:6
WER0001 (WEAR PLATE) - QTY:1
CAMSET000301 (CAM SET) - QTY:1
SNP0006 (SNAP RING) - QTY:1
Services JMP Marine Engine Coolling Raw Water / Seawater Pump:
JPR-JD25UH John Deere Replacement Pump
|
148.73 |
|
|
JMP Marine JSK0080 Cummins Engine Cooling Seawater Pump Major Service Kit
Replaces Cummins 4930629, John Deere DZ108626, Sherwood 25045.
Services Pumps: JPR-C1100, Cummins 3349392, 4929178, 5260393, JPR-JD60IF2, John Deere DZ108620, Sherwood G2910X
JSK0080 JMP Marine Cummins Engine Cooling Raw Water / Seawater Pump Major Service Kit
Replacement and Equivalent to:
Cummins Kit 4930629
John Deere Kit DZ108626
Sherwood Kit 25045
Please Note:
JSK0080 includes all internal parts for full entire rebuild of pump vs Cummins kit 5260396 which has less parts. You get ALL PARTS with JMP Marine kits! Parts are fully compatible to genuine and can be used to service both JMP Marine pumps JPR-C1100, JPR-JD60IF2 along with Genuine OEM pumps!
Kit Includes All Internal Parts for full rebuild:
8359-01 (FLEXIBLE IMPELLER) - QTY:1
CAMSET0032 (CAM SET) - QTY:1
MCSSET0019 (MECHANICAL SEAL SET) - QTY:1
SHA0093 (SHAFT) - QTY:1
ORG0055 (O-RING) - QTY:1
ORG0054 (O-RING) - QTY:1
RET0042 (OIL SEAL) - QTY:1
COV0041 (BEARING COVER) - QTY:1
BER0052 (BEARING) - QTY:2
WER0020 (WEAR PLATE) - QTY:1
COV0038 (END COVER) - QTY:1
SNP0013 (SNAP RING) - QTY:1
BOL0036 (SPRING WASHER) - QTY:5
BOL0007 (END COVER BOLT) - QTY:5
Services JMP Marine & OEM Genuine Engine Cooling Raw Water / Seawater Pumps:
JPR-C1100 Cummins Replacement Pump
JPR-JD60IF2 John Deere Replacement Pump
|
961.73 |
|
|
JMP Marine COV0003 Cover
For JMP Marine JPR-JD25UH, JPR-NL10IP, JPR-NL10IP2
JMP Marine Pumps Using This Cover Plate:
JPR-JD25UH John Deere Replacement
JPR-NL10IP Northern Lights Replacement
JPR-NL10IP2 Northern Lights Replacement
Please note:
COV0003 can only be used to service JMP Marine Pump JPR-JD25UH, JPR-NL10IP, JPR-NL10IP2; it cannot be used to service OEM pumps. This is due changes made for better performance & quality vs OEM.
|
33.09 |
|
|
JMP Marine Crank Mounted Engine Cooling Seawater Pump JPR-CP25UH
Product Information & Specs:
Uses JMP Impeller p/n: 7136-01K
Pump Weight (approx): 4.85 LBS (2.20 KG)
Pump Type: Crank Mounted Raw Water Pump
Port Size (mm/inches): 32mm / 1.25"
Pump Size (mm/inches): Length (124mm/4.88"), Width (114mm/4.49"), Height (117mm/4.61")
Plug & Play Replacement
Heavy Duty Marine Grade Casting
Marine Grade Shaft (3X Series Non-Magnetic)
High Performance Flexible Impeller
Crank Mounted
Replaces these Volvo Penta pumps: 3860703, 841640, 856513, 857451
Replaces this Jabsco pump: 50410-1201
Replaces these Johnson pumps: F6B-9, 10-24232-1, 10-24930-01, 10-24805-01, 10-24076-2, 10-24228-1, 10-24915-1
Replaces this Sherwood pump: P105
Replaces this Alaska Diesel pump: L6414A
Replaces these Indmar pumps: 685001, 685001-1, 685001-3, S685001
Replaces this Marine Power pump: 524520Z
Replaces this Northern Lights pump: 25-11030
Replaces this Sierra pump: 18-3587
Replaces these: Crusader, PCM, Pleasurecraft, Seamaxx RA057023, RA057024, RA057026 pumps
Used on Engine Models Alaska Diesel, Crusader, Indmar, Jabsco, Johnson, Marine Power, Northern Lights, PCM, Pleasurecraft Marine, Sherwood, Sierra, Seamaxx, Volvo Penta
|
277.12 |
|
|
JMP Marine MCSSET0020 Mechanical Seal
Services Pumps: JPR-WB08IP, JPR-YM08IH, JPR-YM08IH2
MCSSET0020 JMP Marine Engine Cooling Raw Water Mechanical Seal Set
Services JMP Marine Engine Cooling Seawater Pumps:
JPR-WB08IP Westerbeke Replacement Pump
JPR-YM08IH Yanmar Replacement Pump - 2GMF, 3GMF, 2YM, 3YM
JPR-YM08IH2 Yanmar Replacement Pump - 2GM, 3GM
|
32.52 |
|
|
Sherwood P1730C-J Engine Pump JPR-S7630
JMP Marine JPR-S7630 Cummins and Sherwood Replacement Seawater Pump
See https://www.clrmarine.com/m4/JMPMA%20JPR-S7630--jmp-marine-jpr-s7630-cummins-and-sherwood-replacement-seawater-pump.html
|
730.01 |
|
|
JMP Marine 7400-01K Impeller Kit With Gasket & O'Ring
Kit Includes:
7400-01 (Impeller) QTY:1
GAK0016 (Gasket) QTY:1
GAK0062 (Gasket) QTY:1
ORG0013 (O-Ring) QTY:1
ORG0022 (O-Ring) QTY:1
Lubricant
Impeller Dimensions & Specs:
A (Impeller Dia) 65mm
B (Impeller Width) 50mm
C (Shaft Dia) 16mm
No. of Blades: 8
Insert Type: Spline Drive(12)
Replacement and Equivalent to the following Impellers:
Cummins 650607
Caterpillar 2637536, 263-7536
Detroit Diesel 5193602, 5196629
Doosan 65.06084-0003
Jabsco 920-0001
Johnson 09-1028B, 09-1028B-1, 09-1028BT-1
John Deere RE49490
Kohler 352122
Northern Lights 25-11011
Onan 132-0436
Perkins 0460024, 24880031, 24880178
Sherwood 18200, 18200K
Sierra 23-3308, 23-3309 (*does not include screws or rubber seals)
Volvo Penta 801277, 825941, 877061, 875593, 3841697, 20799057, 21422647, 21951356
Yanmar 123325-42020, 127610-42200, 127610-42270, 120650-42310
Nikkiso F20CBC
Kashiyama SP-70
JMP Marine Pumps Using This Impeller:
JPR-CT0440 (Caterpillar Replacement)
JPR-CT3054 (Caterpillar Replacement)
JPR-JD25UH (John Deere Replacement)
JPR-VP0040DB (Volvo Penta Replacement)
JPR-VP0050D (Volvo Penta Replacement)
JPR-V1000 (Volvo Penta Replacement)
JPR-NL20IP (Northern Lights Replacement)
JPR-M25IP (Multi-Purpose Electro-Magnetic Clutch Pump)
JPR-25UP (Multi-Purpose Electro-Magnetic Clutch Pump)
|
29.28 |
|
|
JMP Marine RET0045 Oil Seal, Retainer
Services Pump: JPR-WB08IP
RET0045 JMP Marine Engine Cooling Raw Water Pump Oil Seal Retainer
Includes: RET0045 OIL SEAL, RETAINER
Services JMP Marine Engine Cooling Seawater Pump JPR-WB08IP Westerbeke Replacement Pump
|
11.56 |
|
|
JMP Marine Caterpillar C18 Engine Cooling Seawater Pump Minor Service Kit
Replaces Caterpillar Kit 2845562. Services Pump(s) JPR-CT1800R, Caterpillar 3754703, Sherwood G2902X, G2902-01, G2906X
|
532.24 |
|