|
Jabsco Phenolic Pump W/Ss Shaft &Amp; Viton
FEATURES
Pump Body:
Phenolic Type Plastic
Port Size:
5/8" ID Hose Slip On
Flow:
5.8 GPM at 10 feet of Head, 1750 RPM
Pressure:
13 PSI Max
Impeller:
Neoprene, Nitrile or Viton
Shaft Seal:
Lip Type
Shaft:
Stainless Steel or Hastelloy
Bearing:
Filled Teflon - Replaceable
APPLICATIONS / CHARACTERISTICS
INDUSTRIAL: Designed for: Carboy and drum transfer, hazardous chemical transfer and recirculation, recirculation of descaling compounds through refrigeration and condenser coils, printed circuit etching, general laboratory transfer, photographic fixes and developers, barium transfer, transfer of ammonia on blueprint machines, silver recovery, demineralized and distilled water.
The only metallic parts in the 3010 series are the shaft and the drive pin
Jabsco Phenolic Pump W/SS Shaft & Viton Impeller
|
463.05 |
|
|
Jabsco Phenolic Pump Plas Ped 020 Hsg
FEATURES
Pump Body: Phenolic Type Plastic
Port Size: 5/8" ID Hose Slip On
Flow: 5.8 GPM at 10 feet of Head, 1750 RPM
Pressure: 13 PSI Max
Impeller: Neoprene, Nitrile or Viton
Shaft Seal: Lip Type
Shaft: Stainless Steel or Hastelloy
Bearing: Filled Teflon - Replaceable
INDUSTRIAL: Designed for: Carboy and drum transfer, hazardous chemical transfer and recirculation, recirculation of descaling compounds through refrigeration and condenser coils, printed circuit etching, general laboratory transfer, photographic fixes and developers, barium transfer, transfer of ammonia on blueprint machines, silver recovery, demineralized and distilled water.
The only metallic parts in the 3010 series are the shaft and the drive pin
Jabsco Phenolic Pump W/SS Shaft & Neoprene Impeller
|
382.82 |
|
|
Jabsco 50860-0012 Series SS Cyclone Circulation Pump
Pump Body:
Stainless Steel
Port Size:
3/4" pipe threads. Available with NPT or BPS threads.
Flow:
80 Litres/min (21.1 USgallons/min)
Pressure:
up to 1.3 bar (19psi)
Impeller:
Stainless Steel Anti-clog impeller design.
Shaft Seal:
Mechanical
Motor:
Max. 30 minutes duty (Min. 30 minutes off).
ISO 8846 MARINE and USCG Regulations for Ignition Protection • ISO 8849 MARINE Bilge Pump Standard.
APPLICATIONS
Silent running. Single tool servicing. 2m (6 foot) suction lift when wet.
A range of Stainless Steel General Purpose Centrifugal pumps designed specifically for the marine and industrial markets. Typical applications would be for circulation applications such as hot water systems, livewell or bait tank installations
Jabsco Cyclone SS Centrifugal Pump Hi-Pressure 12Volt 3/4"NPT 21GPM 19psi
|
495.54 |
|
|
Jabsco 18753-0192 Body - SS 30540 For Pump
|
2351.36 |
|
|
Jabsco 12290 Series Self Priming Pump Phenolic
Pump Body: Phenolic Plastic
Port Size: 5/8" OD for Hose Connections
Flow: 5.8 GPM at 10 feet of head
Pressure: Up to 13 PSI
Impeller: Neoprene, Nitrile or Viton
Shaft Seal: Lip Type
Shaft: Shaft of Motor (Stainless Steel)
Motor: 115 Vac, 1/6 hp, 1750 RPM, 60 Hz, relay start and thermal over-load protector
Three-prong ground plug
APPLICATIONS
A low cost pump for: transfers, circulation, spill returns, filtration and filling line use. Easily handles pure solutions, foaming liquids, emulsions, suspended solids and ferments with viscosities less than 500 SSU (120 cp). Because the plastic pump is resistant to corrosion and metallic contamination, it is widely used for pumping photo chemicals, plating compounds, lab solutions, pharmaceuticals, cosmetics, weak acids, alkalies, liquid fertilizers, insecticides, dyes, detergents, waxes and many more.
Jabsco Self Priming Pump 5/8" Hose Ports 115V Totally Enclosed Motor Phenolic Head, Neoprene Impeller
|
907.92 |
|
|
Jabsco 12290 Series Self Priming Pump Phenolic
Pump Body:
Phenolic Plastic
Port Size:
5/8" OD for Hose Connections
Flow:
5.8 GPM at 10 feet of head
Pressure:
Up to 13 PSI
Impeller:
Neoprene, Nitrile or Viton
Shaft Seal:
Lip Type
Shaft:
Shaft of Motor (Stainless Steel)
Motor:
115 Vac, 1/6 hp, 1750 RPM, 60 Hz, relay start and thermal over-load protector, Three-prong ground plug.
APPLICATIONS
Designed as a low cost pump for: transfers, circulation, spill returns, filtration and filling line use. Easily handles pure solutions, foaming liquids, emulsions, suspended solids and ferments with viscosities less than 500 SSU (120 cp). Because the plastic pump is resistant to corrosion and metallic contamination, it is widely used for pumping photo chemicals, plating compounds, lab solutions, pharmaceuticals, cosmetics, weak acids, alkalies, liquid fertilizers, insecticides, dyes, detergents, waxes and many more.
|
888.25 |
|
|
Jabsco 12310 Series Flexible Impeller Pump
FEATURES
Pump Body: Phenolic
Port Size: 3/4" External Thread Garden Hose and 3/8" Internal Pipe Thread
Flow: 4.0 GPM at 10ft
Pressure: 17.3 PSI Max
Impeller: Nitrile
Shaft Seal: Lip Type
Shaft: Stainless Steel (Supplied in Motor)
Motor: 115 VAC (Intermittent Duty)
APPLICATIONS
A low cost pump with improved chemical resistance for chemical feeding, transfer, circulation, filtration, metering, filling line use and similar applications. Handles pure solutions, foaming liquids, and thin emulsions. Because of the chemical, resistance of phenolic plastic and 316 stainless steel, these pumps are widely used to pump photo chemicals, plating solutions, lab solutions, pharmaceuticals, cosmetics, weak acids, alkalies, liquid fertilizers, insecticides, dyes, detergents, waxes and many more. Limit to liquids with viscosity less than 50 SSU.
Jabsco Flexible Impeller Pump 115V Phenolic Head Nitrile Impeller
|
493.84 |
|
|
Jabsco 12310 Series Flexible Impeller Pump
FEATURES
Pump Body: Phenolic
Port Size: 3/4" External Thread Garden Hose and 3/8" Internal Pipe Thread
Flow: 4.0 GPM at 10ft
Pressure: 17.3 PSI Max
Impeller: Neoprene or Nitrile
Shaft Seal: Lip Type
Shaft: Stainless Steel (Supplied in Motor)
Motor: 115 VAC (Intermittent Duty)
APPLICATIONS
A low cost pump with improved chemical resistance for chemical feeding, transfer, circulation, filtration, metering, filling line use and similar applications. Handles pure solutions, foaming liquids, and thin emulsions. Because of the chemical, resistance of phenolic plastic and 316 stainless steel, these pumps are widely used to pump photo chemicals, plating solutions, lab solutions, pharmaceuticals, cosmetics, weak acids, alkalies, liquid fertilizers, insecticides, dyes, detergents, waxes and many more. Limit to liquids with viscosity less than 50 SSU.
|
493.84 |
|
|
Jabsco Pump Mpu Ss 3/4 Vit
FEATURES
Pump Body:
316 Stainless Head with Bracket or Complete Motor Pump Unit
Port Size:
3/4" NPT Internal
Flow:
Nominal 10.1 USgallons/min at 1750rpm
Pressure:
Pressure up to 1.5 bar
Impeller:
Neoprene, Nitrile, Viton or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic, or Tungsten Carbide; Nitrile or Viton
Shaft:
316 Stainless Steel
Motor:
115 Vac, Single Phase, 60 Hz, 3/4 HP, 1750 RPM, TEFC, C-Face, 56C Frame, Overload Protected, Capacitor Start.
APPLICATIONS / CHARACTERISTICS
Easy to service and maintain. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Non pulsating flow. Self-priming from dry up to 2.4m (7.8ft).
INDUSTRIAL: Circulating and transferring,velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerine, brine, etc.
PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions. Filling line supply pump.
PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries.
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whiskey, wine, rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides.
Jabsco Motor Pump Unit 316SS 3/4" NPT Viton Impeller Carbon Seal 3/4HP 115V TEFC
|
3403.69 |
|
|
Jabsco Pump Mpu Ss 3/4 Vit Tc
FEATURES
Pump Body:
316 Stainless Head with Bracket or Complete Motor Pump Unit
Port Size:
3/4" NPT Internal
Flow:
Nominal 10.1 USgallons/min at 1750rpm
Pressure:
Pressure up to 1.5 bar
Impeller:
Neoprene, Nitrile, Viton or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic, or Tungsten Carbide; Nitrile or Viton
Shaft:
316 Stainless Steel
Motor:
115 Vac, Single Phase, 60 Hz, 3/4 HP, 1750 RPM, TEFC, C-Face, 56C Frame, Overload Protected, Capacitor Start.
APPLICATIONS / CHARACTERISTICS
Easy to service and maintain. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Non pulsating flow. Self-priming from dry up to 2.4m (7.8ft).
INDUSTRIAL: Circulating and transferring,velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerine, brine, etc.
PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions. Filling line supply pump.
PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries.
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whiskey, wine, rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides.
Jabsco Motor Pump Unit 316SS 3/4" NPT Viton Impeller Tungsten Carbide Seal 3/4HP 115V TEFC
|
4519.40 |
|
|
Jabsco Pump Peo Ped Ss 1" Vit
FEATURES
Pump Body:
316 Stainless Steel Pedestal Pump
Port Size:
1" NPT Internal
Flow:
Nominal 21.8 USgallons/min at 1750rpm
Pressure:
Pressure up to 1.5 bar
Impeller:
Neoprene, Nitrile, Viton or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic, or Tungsten Carbide; Nitrile or Viton
Shaft:
316 Stainless Steel
APPLICATIONS / CHARACTERISTICS
Easy to service and maintain. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Non pulsating flow. Self-priming from dry up to 2.4m (7.8ft).
INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerine, brine, etc.
PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions. Filling line supply pump.
PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries.
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whiskey, wine, rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides.
Jabsco Pedestal Pump 316SS 1" NPT Std Pressure Viton Impeller Carbon Seal
|
2844.76 |
|
|
Jabsco Pump Peo Ped Ss 1" Vit Tc
FEATURES
Pump Body:
316 Stainless Steel Pedestal Pump
Port Size:
1" NPT Internal
Flow:
Nominal 21.8 USgallons/min at 1750rpm
Pressure:
Pressure up to 1.5 bar
Impeller:
Neoprene, Nitrile, Viton or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic, or Tungsten Carbide; Nitrile or Viton
Shaft:
316 Stainless Steel
APPLICATIONS / CHARACTERISTICS
Easy to service and maintain. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Non pulsating flow. Self-priming from dry up to 2.4m (7.8ft).
INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerine, brine, etc.
PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions. Filling line supply pump.
PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries.
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whiskey, wine, rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides
Jabsco Pedestal Pump 316SS 1" NPT Std Pressure Viton Impeller Tungsten Carbide Seal
|
3840.66 |
|
|
Jabsco Pump Peo Ped Ss 1"
FEATURES
Pump Body:
316 Stainless Steel Pedestal Pump
Port Size:
1" NPT Internal
Flow:
Nominal 21.8 USgallons/min at 1750rpm
Pressure:
Pressure up to 1.5 bar
Impeller:
Neoprene, Nitrile, Viton or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic, or Tungsten Carbide; Nitrile or Viton
Shaft:
316 Stainless Steel
APPLICATIONS / CHARACTERISTICS
Easy to service and maintain. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Non pulsating flow. Self-priming from dry up to 2.4m (7.8ft).
INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerine, brine, etc.
PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions. Filling line supply pump.
PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries.
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whiskey, wine, rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides.
Jabsco Pedestal Pump 316SS 1" NPT High Pressure Viton Impeller Tungsten Carbide Seal
|
3761.10 |
|
|
Jabsco Pump Mpu Ss 1" Vit
FEATURES
Pump Body:
316 Stainless Head with Bracket or Complete Motor Pump Unit
Port Size:
1" NPT Internal
Flow:
Nominal 21.8 USgallons/min at 1750rpm
Pressure:
Pressure up to 1.5 bar
Impeller:
Neoprene, Nitrile, Viton or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic, or Tungsten Carbide; Nitrile or Viton
Shaft:
316 Stainless Steel
Motor:
115/230 Vac, Single Phase, 60Hz, 1-1/2 HP, 1740 RPM, TEFC, C-Face, H145TC Frame, Overload Protected, Capacitor Start.
APPLICATIONS / CHARACTERISTICS
Easy to service and maintain. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Non pulsating flow. Self-priming from dry up to 2.4m (7.8ft).
INDUSTRIAL: Circulating and transferring,velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerine, brine, etc.
PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions. Filling line supply pump.
PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries.
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whiskey, wine, rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides.
Jabsco Motor Pump Unit 316SS 1" NPT Viton Impeller Carbon Seal 1 1/2HP 115/230V TEFC
|
3330.06 |
|
|
Jabsco Pump Mpu 145Tc Ss Vit Tc
FEATURES
Pump Body:
316 Stainless Head with Bracket or Complete Motor Pump Unit
Port Size:
1" NPT Internal
Flow:
Nominal 21.8 USgallons/min at 1750rpm
Pressure:
Pressure up to 1.5 bar
Impeller:
Neoprene, Nitrile, Viton or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic, or Tungsten Carbide; Nitrile or Viton
Shaft:
316 Stainless Steel
Motor:
115/230 Vac, Single Phase, 60Hz, 1-1/2 HP, 1740 RPM, TEFC, C-Face, H145TC Frame, Overload Protected, Capacitor Start.
APPLICATIONS / CHARACTERISTICS
Easy to service and maintain. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Non pulsating flow. Self-priming from dry up to 2.4m (7.8ft).
INDUSTRIAL: Circulating and transferring,velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerine, brine, etc.
PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions. Filling line supply pump.
PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries.
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whiskey, wine, rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides.
Jabsco Motor Pump Unit 316SS 1" NPT Viton Impeller Tungsten Carbide Seal 1 1/2HP 115/230V TEFC
|
4709.99 |
|