|
Jabsco 18940-0010 Engine Cooling Pump 1 1/4" Ports
Pump Body: Bronze
Port Size: 1 1/4" ID Hose
Impeller: Neoprene
Shaft Seal: Carbon-Ceramic Face Type
Shaft: Stainless Steel
Pulley: 6 1/2" diameter "A" belt
This Jabsco alternator mounted engine driven water pump has been used on a wide range of engines including Chrysler, Lehman, and Powerhouse Marine. Engineered for marine applications and a long service life, the body is cast bronze and features a stainless steel shaft. Impeller access is available by removing the front portion of the pump body. Hose barbs are cast into the pump body so that tail pieces are not required for installation. Pump is driven by a 6 1/2" pulley that is compatible with type A belts.
Key Features
Flange mounted engine driven flexible impeller water pump
Self-priming at slow RPMs
Includes 6 1/2" pulley compatible with type A belts
Corrosion resistant bronze pump body
Stainless steel shaft for superior corrosion resistance
Compatible engines
Chrysler: replaces Sherwood model G5
LM 318
LM 340
LM 360
LM 383
LM 400
LM 440
Lehman 302, 351 cu. in.
Powerhouse Marine 302, 351 cu. in.
|
1103.84 |
|
|
Jabsco 1673-2001 Pump 1/2" Npt Neo W/Mech Sl
FEATURES
Pump Body: Bronze
Port Size: 1/2" NPT
Flow & Pressure: Varies by application. A half thickness cam is also available, (Where reduced capacity is required with a fixed speed.)
Impeller: Neoprene
Shaft Seal: Mechanical seal
Shaft: Stainless Steel
Bearings: Sealed Ball Bearings
APPLICATIONS
This pump offers all the benefits of a flexible impeller pumps in a compact size with moderate flow rate and horizontally oriented ports.
MARINE: Engine cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals,
Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
FARMING: Pumping water for stock, Pumping water from shallow wells and cisterns, Pumping liquid ballast into tractor tires.
PLUMBING AND HOME EMERGENCY USE: Pumping out flooded basements, Cesspools, Sumps, Water heaters and water closets, Drains and sinks, Draining fishponds and pools.
Jabsco Flexible Impeller Pedestal Pump 1/2"NPT Mechanical Seal Neoprene Impeller
|
543.35 |
|
|
JABSCO 30180-0003 Pump 1 1/2" Ports 23 GPM 115VAC
Body: Bronze
Impeller: Nitrile
Shaft: 316 Stainless Steel Impeller Sleeve Over Motor Shaft
Shaft Seal: Lip Type
Motor: 1/3 HP Capacitor type 115v with 8" cord
Built In Dry Running Capability (up to 30 minutes) After Initial Priming
MARINE: Bait Tank Circulation; Washdown, Utility Dockside Pump.
INDUSTRIAL: Industrial Filling Systems; Utility Shop Pump; Transfer Gum Arabic, Transfer Distilled Water; Recharge Water Softeners; Hydro-static Pressure Testing; Sump Pumping.
FOOD, BEVERAGE & DAIRY: Circulate Cooling Water; Defrost Refrigeration Coils; Fill Drums; Wash Down Equipment and Floors; Utility Pump.
HOME: Fill and Empty Tubs, Pools; Empty Basements and Cesspools; Water Systems; Water Lawns and Gardens; Remove Water from Low Areas; Recharge Water Softeners.
PLUMBING: Empty Clogged Drains, Empty Sumps, Sinks and Tubs; Pump Out Water Closets.
FARM: Fill Tractor Tires, Water Tanks; Pump out Silo Pits (liquid manure); Flush and Clean Animal Pens.
<
CONTRACTORS: Remove Water from Excavations; Supply Water to Mortar Boxes; Cement Mixing; Washdown Equipment.
|
512.38 |
|
|
Jabsco 3270-0001 Engine Cooling Pump 3/4" Ports Flange Mount
Perkins 4-107
Perkins 4-108
Fitting: 3/4 in. NPT
Size: 4 1/4 in. long x 4 1/8 in. wide x 3 7/8 in. high
Weight: 4 lb (1.8 kg)
Drive: Coupling
Mount: Engine
|
650.05 |
|
|
Jabsco 18330 Series Electric Clutch Pump
FEATURES
Pump Body:
Bronze
Port Size:
2" NPT
Flow:
83 GPM at 10 feet of Head, 1750 RPM
Impeller:
Nitrile
Shaft Seal:
Mechanical, Carbon-Ceramic
Shaft:
Brass
Pulley:
7" Diameter
APPLICATIONS
SELF PRIMING PEDESTAL MOUNT ELECTRIC CLUTCH PUMP
MARINE: Engine cooling, pumping bilges, washdowns, circulating water in bait tanks, utility dockside pump.
INDUSTRIAL: Circulating and transferring, velocity mixing, return spill, sump drainage, chemicals,pharmaceuticals, soap, liquors, ink, dyes, alcohol, tanning liquors, glycerine. brine. etc.
FARMING: Pumping water for stock, pumping water from shallow wells and cisterns.
PUBLIC UTILITIES AND MUNICIPALITIES: Under the hood mounting on service trucks for dewatering and draining meter boxes, manholes, excavations and emergency pumping.
18330-0001 is Jabsco Electric Clutch Pump 24V, 2" NPT Ports, Double "A" Groove Pulley
|
1590.14 |
|
|
Jabsco 6100-0000 Engine Cooling Pump
|
464.06 |
|
|
JABSCO 29460-10-1051 PUMP BRONZE FLANGE
Jabsco Engine Cooling Pump 29460-10-1051 has Bronze Flange Mount with a Splined Shaft.
Used with Beta, Kubota, Nanni, Vetus and Zeise with 20mm Hose Ports.
|
497.15 |
|
|
Yanmar 119773-42652 Raw Water Pump
Yanmar Bronze Engine Cooling Pump
Does Not Include Port Fitting, Port Gasket, Gear, Gear Hardware, or Mounting O-Ring.
For Yanmar: 6LP Series 6LPA-DTP 6LPA-STP 6LPA-DTZP 6LPA-STZP,
Replaces Yanmar: 119773-42650, 119773-42500, 119773-42501, 119773-42502, Johnson 10-24493 10-24493-01 10-24493-02 F6B-9
|
453.93 |
|
|
Jabsco 17540-0201 Engine Cooling Pump
Jabsco 17540-0201 is a Detroit Diesel marine engine cooling pump
Impeller: Neoprene
Shaft Seal: Carbon/Ceramic Mechanical Seal
Port Size: 3 Inch
This is the Marine Engine Cooling Pump for Detroit Diesel Series 60 Engines, Detroit Diesel pumps 23525200, 23522735, 23535447.
|
3971.18 |
|
|
Jabsco 17360-1001 Engine Cooling Pump
For Detroit Diesel, V-71-92, 23507475, 23507476, 23507477, 23507973
Caterpillar, D-336, D-343, D-353, 3N1888
Some Stewart & Stevenson Marinizations of Detroit Diesel Engines.
Pump Body: Bronze
Port Size: 2-1/2" Flange Type
Impeller: Neoprene use Jabsco 17370-0001-P Impeller
Cam: Wear Resistant Polyurethane Cam/Liner
Shaft Seal: Mechanical Face Seal
Shaft: 316 Stainless Steel
Constructed from marine quality bronze and stainless steel for ruggedness and reliability.
Easy to service and maintain.
Bronze flexible impeller engine cooling pump
Flow rate: Nominal 270 Litres/min (60 gallons/min) at 1500rpm
Self-priming from dry up to 2.4m (7.8ft)
Minor plumbing modifications may be required for certain applications.
Jabsco Engine Cooling Pump, 6 cover screws with double flat Impeller drive
|
3112.95 |
|
|
Jabsco Flexible Impeller Pedestal Pump 7.5 GPM
Pump Body: Bronze
Port Size: 3/8" NPT Internal
Flow: 7.5 GPM
Impeller: Viton, Neoprene or Nitrile
Shaft Seal: Nitrile or Viton Lip Type
Shaft: 316 Stainless Steel
Constructed from marine quality bronze and stainless steel for ruggedness and reliability. Easy to service and maintain. Inexpensive to buy and operate. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Can pump in either direction. Will not airlock.
MARINE: Engine Cooling, Pumping bilges, Washdowns, Circulating water in bait tanks, Utility dock side pump.
INDUSTRIAL: Circulating and transferring, Velocity-mixing, Pumping machine tool coolants, Return spill, Sump drainage, Chemicals, Pharmaceuticals, Soap, Liquors, Ink, Dyes, Alcohol, Various acids, Tanning liquors, Glycerine, Brine, etc.
|
694.43 |
|
|
Jabsco 18840 Series Engine Cooling Pump
Pump Body: Bronze
Port Size: 1" ID Hose
Impeller: Neoprene
Shaft Seal: Carbon-Ceramic Face Type
Shaft: Stainless Steel
Pulley: 6 1/2" diameter "A" belt
Jabsco Engine Cooling Pump High Pressure 1" Hose Ports With 6 1/2" "A" Belt Pulley
|
1135.10 |
|
|
Jabsco Pump 9700-01 for Perkins 6354 Full Cam
Engine Cooling Pump for Perkins 6354 engine 3 bolt mounting. 9700-01 is Perkins 248
Pump Body: Bronze
Port Size: Flanged
Impeller: Neoprene
|
823.30 |
|
|
Johnson 10-35157-1 Engine Cooling Pump
FEATURES
Pump Body:
Bronze
Ports:
Threaded or Hose
Cam:
Full or 1/2
Impeller:
Neoprene
Shaft Seal:
2 Lip Seals
Drive:
Flange Mounted to Engine.
APPLICATIONS / CHARACTERISTICS
Flexible Impeller Engine Cooling Pump.
Requires (2) Johnson 01-43238 Clamps to Mount.
Johnson- Engine Cooling Pump Slip-Fit Ports Full Cam F35B-9, Volvo 858065
|
364.85 |
|
|
Jabsco 18830-1020 Engine Cooling Pump
Pump Body: Bronze
Port Size: 1" ID Hose
Impeller: Neoprene
Shaft Seal: Carbon-Ceramic Face Type
Shaft: Stainless Steel
Jabsco 18830-1020 Engine Cooling Pump with High Pressure Impeller, 3/16" Pulley Key and No Pulley or Pulley Mounting Plate.
|
745.98 |
|