85A Remote Switching Continuous Duty Solenoid Can be used with Electro-Scan MSDs and other high-amp circuits with remote operation. Features: Continuous duty, 85A at 12V DC Intermittent rating 750A make/100A break, 10 seconds On, 30 minutes Off Insulated ground Steel housing, brass hardware UL listed and CE certified Same as Cole Hersee part number 24059 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

65A Remote Switching Continuous Duty Solenoid Remotely switch high amperage loads with a low amperage on-off switch. Features: Continuous duty 65A, Intermittent duty 100A (10 Sec.) Copper #10-32 thread ignition and ground terminals Copper 5/16"-24 thread contact terminals Plated steel case, copper contacts Hexnuts and washers included Bracket mounting holes 5/16" x 19/32", 2-13/64" on centers UL and CE approved Same as Cole Hersee part number 24059-08 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

65A PVC Coated Continuous Duty Solenoid Remotely switch high amperage loads with a low amperage on-off switch. Features: Continuous duty, 65A at 12V DC Intermittent rating 100A: 10 seconds Copper #10-32 thread signal terminals Copper 5/16”-24 thread contact terminals PVC coated steel case Bracket mounting holes 5/16” x 19/32”, 2-13/64” on centers UL and CE approved Same as Cole Hersee part number 24117-01 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Continuous Duty Solenoid - 200A - 12V Relays are commonly referred to as remote-acting switches and Littelfuse manufacturers a broad range of styles to meet your application. To ensure you are utilizing the proper remote-acting switches, review the attributes in the specifications tab below against your application requirements. Specifications: Current Rating (Continuous) in Amps: 200 Circuitry: SPST Normal Position: Normally Open Contact Material: Silver Housing: Plated Steel

Continuous Duty Solenoid 65 Amp 12V UL Listed Relays are commonly referred to as a remote-acting switches and Littelfuse manufacturers a broad range of styles to meet your application. To ensure you are utilizing the proper remote-acting switches, review the attributes in the specifications tab below against your application requirements. Features: 65 Amp 12V Copper Contact Stud Material Steel Coil Stud Material Normally Open Contacts

Continuous Duty Solenoid - 12V Minimizes arcing and contact oxidation, maintains highp erformance. Universal use with part numbers available to handle loads up to 200A. PVC Coated option available for a more environmentally sealed product. Coated solenoids withstand moisture and dust to IP66. Mechanical Specifications: SPST Normally open contacts Plated steel housing. Hexnuts and washers included Large (power circuit) battery studs; copper 5/16” -24 thread Small (control circuit) coil studs; steel 10-32 thread Bracket mounting holes 5/16 X 19/32” (7.9 X 15.1mm) on 2 13/64” centers (56.0mm) Available with PVC coated exterior or Potted Coil interiors for harsh environments or vibration resistance Caution: Never unscrew the inner hexnuts on the studs These keep the stud and inner wiring in place

Continuous Duty Solenoid (CDS) Raritan's Continuous Duty Solenoid is a toilet replacement part. Raritan manufactures equipment for pleasure boats throughout the world. Products include marine toilets, waste treatment systems, icemakers and water heaters. Committed to the environment and preserving sea life, Raritan designs products to help maintain an environmental balance and ensure the quality of marine waters. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Continuous Duty Solenoid - 12V - PVC Coated Features: Hex nuts and lock washers are included Steel housing mounting holes: 5/16 x 19/32,” 2 13/64” on centers (7.9 x 15.1, 56.0mm) Plated steel housing available with optional PVC coating available to protect critical components from environmental hazards 12 Volt PVC Coated 65 Amps Insulated Contact: Copper UL Listed

100A Engine Starting Intermittent Duty Solenoid Intermittent switching of high amperage loads with a low amperage on-off switch. Features: Rated at 750A make/100A break, this solenoid is for intermittent use only: 10 seconds ON, 20 minutes OFF (ideal for engine cranking) Signal voltage of 12V DC and contact voltage of 6-12V DC #10/32 thread signal terminals Copper 5/16”-24 thread contact terminals Bracket mounting holes 5/16” x 19/32”, 2-13/64” on center Same as Cole Hersee part number M-200 WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Wireless Remote Control Kit f/701-MD & 720 Size Battery Switches Wirelessly operate your BEP motorized battery switches from a distance of up to 250 feet (80 meters) away. Control up to 4 separate 5A circuits such as 701-MD/720-MDO battery switches, anchor light, navigation lights, and courtesy lights. No more lifting hatches to turn on battery switches - it is now all controlled from the remote key fob. Control battery switches easily (On/Off) from the dock Remote has a rolling code for security WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Vertical Battery Switch Cluster w/DVSR - 1 Engine/2 Batteries BEP Dual Battery Switches with Digital VSR and Emergency Parallel Dual Battery charging clusters For use on charging systems under 140Amps To be used in the following systems: Single outboard dual battery bank Single alternator inboard engine dual battery bank Dimensions: 276L X 69W x 75H mm (vertical) WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

DC 250 CFM Flexmount Continuous Duty 4" Blowers Features: Extended Life 5,000 Hour Motor Tough Reinforced Thermoset Plastic Housing Mounts To Any Flat Surface Slip-On Inlet Ducting Connection Efficient High Volume Air Flow Low-Current Draw Corrosion-Resistant Materials Throughout N.M.M.A. Type Accepted Meets USCG Electrical Regulations of Title 33 Chapter I, Part 183 Subpart I and IS0 8846 for Ignition Protection Complies with ISO 9097 Marine CE Conforms with EN 5008-1 for Supression of Electro-magnetic interference WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Remote Switch Inverter Control Panel (ICP) On/off control for the AC Master sine wave inverter with a clear on/off indicator which indicates when the inverter is active. In addition, the ICP makes it possible to turn the inverter on or off automatically by means of a 12-volt input, for example when switching on the onboard AC power or while starting an engine. The ICP remote control comes with 8 m (25 ft) cable. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Little Giant Remote Switch 599008 Little Giant RS-5 Remote Switch Converts any manual pump, up through 1/2 horsepower, to automatic Provides control of a pump in water and sump applications this design allows operation in applications with limited space Certified and UL listed 115 volts max 10 Amps 10-foot cord, piggyback plug

Deckhand 40 Remote Switch 25' cord allows you to operate the DeckHand 40 from anywhere on the boat WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.