|
Pontoon Rail Adapter Mount
Rail Mount Adapter is designed to adapt wrap around style rail mounts to square pontoon railing with full height paneling.
The adapter saddles the top rail and securely clamps in place with the included Allen key. It stays in place without any drilling or permanent installation damage. The Grill Mount Adapter is made of durable stainless steel and aluminum that resists rust and corrosion.
Features:
Use in addition to wrap-around style grill mount to mount grill on a pontoons' full height paneling
No need to drill holes into fence panel or railing
Easily adjusts from 1.4" to .75" with included Allen key
Stainless steel and aluminum construction is rust-resistant
Heavy-duty and durable
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
37.09 |
|
|
Universal Single Axis Mount
The Universal Single Axis Rail Mount solves many standard mounting problems. Allows you to mount your Kuuma grill either vertically or horizontally to any square or round railing.
This mount allows your grill to hang outside the rail to protect fiberglass from spills and splatters.
Compatible With:
Any Kuuma grill
Features:
Can be used on horizontal or vertical rails
Can be used on square or round rails
Hang your grill outside the rails to protect fiberglass from spills
All installation hardware included
*Sold as an Individual
WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
80.88 |
|
|
SUPRAX Replacement Square Pontoon Rail Clamp
One replacement SUPRAX clamp for pontoon boats. *This item is a tension mount installation and it only works on pontoon rails that are “completely” square. Please note: some of the newer pontoon boats do not have completely square railings. These rail claims WILL NOT fit those style rails.*
Fits up to 1-5/8" in width.
|
51.35 |
|
|
Pontoon Rail Fender Adjuster - 4-Pack
Finally, a fender adjuster designed specifically for the 1" square tube rails of Pontoon Boats. The mounting structure clamps securely to square tubing yet can be repositioned quickly and easily. Constructed from durable ABS plastic, this fender adjuster allows for simple height adjustment for lines up to 3/8".
|
22.88 |
|
|
Roller Pontoon Guide-On
Ideal for bunk style pontoon boat trailer with box, channel, or I-beam frames up to 3" wide x 4-1/4" tall. Minimum friction rolling action easily guide pontoon boat onto trailer. Height is 25" above trailer frame. Mount with roller bunks 2-3" from pontoons on a trailer fram cross member.
Features:
Fits frames up to 3" wide x 4-1/4" tall
U-bolt mounting brackets
Includes two rubber roller bunks
Galvanized steel construction
Zinc plated hardware
For larger trailer frames check out the Large Frame U-Bolt Kit (11416).
WARNING: This product can expose you to chemicals including ARSENIC ,CADMIUM which are known to the State of California to cause cancer or other reproductive harm, and BERYLLIUM,COBALT METAL POWDER,NICKEL (METALLIC) which are known to the State of California to cause cancer, and Chromium (hexavalent compounds),LEAD which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
103.82 |
|
|
Venta Pontoon Anchor Winch Mounting Plate
The Lewmar pontoon anchor winch mounting plate, crafted from durable aluminum, ensures a secure fit for your Venta pontoon winch system. With diverse hole patterns, it offers universal compatibility for effortless installation.
Elevate your pontoon boating experience with the Lewmar pontoon anchor winch mounting plate. Crafted from sturdy aluminum, this essential accessory guarantees a secure and reliable fit for your Venta pontoon winch system. Its versatile design, boasting diverse hole patterns, ensures effortless installation on various pontoon designs, offering unparalleled convenience and peace of mind on the water. Don't let cumbersome installations hold you back — make anchoring a breeze with Lewmar's premium mounting plate.
Features:
Durable aluminum construction prevents rust
Diverse hole patterns for universal mounting
Designed for use with the Venta pontoon anchor winch system
|
217.92 |
|
|
Shakespeare Style 4720 Economy Rail Antenna Mount
Shakespeare's Style 4720 Economy Rail Mount is designed for quick and easy installation on vertical or horizontal, straight or angled rails. Its simple design makes installation a snap. The vice section grips the rail, and the flat section supports the antenna. The flat section can also be bolted to a flat surface, instead of to the rail grip.
Standard 1" - 14 thread
Nylon adapters included for 7/8", 1", and 1-1/4" vertical or horizontal rails
Stainless steel construction
|
23.68 |
|
|
RAM STACK-N-STOW Bait Board w/Combination Bulkhead Rail Adapter Kit
The RAP-395-RMU consists of the RAM STACK-N-STOW Bait Board, 3" long spline post and bulkhead rail adapter kit. The bait board includes a magnetic surface for bait knife, hooks, lures or any ferrous metal item, never again scramble to find your essential tools while on the water. With various extension pole options for post and spline you can get creative with your install. Integrated features for hanging tools, lures, clippers, mounting a GoPro camera, cup holders and much more, this bait board is a feature rich option for the savvy angler. This mount joins two plates with the screws provided and turns the flate base into a rail base. The adapter is a U shape, so it can wrap around a tube mount and the clamp by joining to the flat base. The bait board will also accomodate pipes and extension poles with a diameter of 1".
Features:
Magnetic surface for tools
Customized mounting options
Accessorize with phone, camera, drink cup mounts
Mounting options for boat and kayak
High strength materials ensure product longevity
Integrated features for hanging tools
Easy removal and stowage
Made in U.S.A.
Lifetime warranty
Bait Board Dimensions:
Length: 10"
Width: 13"
Depth: 1.625"
Material:
High Strength Composite
Note:
The "U" in the part number reflects product packaged in poly bag.
|
45.07 |
|
|
Side Rail Flashlight Holder
Safely and easily secure a flashlight to your First Watch Water Helmet with this adapter. Works with the side rail plate of the helmet.
In the Box:
Side rail adapter mount
Flashlight holder - 25mm
Instruction manual
*Sold as an Individual
|
32.40 |
|
|
Picatinny Lite Holder with Adapter
Safely and easily secure a flashlight to your First Watch Water Helmet with this adapter. Works with the side rail plate of the helmet.
In the Box:
Side rail adapter mount
Flashlight holder - 25mm
Instruction manual
*Sold as an Individual
|
41.40 |
|
|
Quick Release Rail Mount
1.5" Universal Quick Release Track Rail Adapter
|
20.41 |
|
|
Quick Release Rail Mount
1" Universal Quick Release Track Rail Adapter
|
16.52 |
|
|
SnapIt! Marine BRK Pontoon Boat Universal Mounting Bracket
Universal Mounting Bracket. The use of additional mounting brackets allows the option of utilizing the removable accessories at different locations on the boat. Color: White.
|
4.50 |
|
|
Rail / Side Mount
Lets you secure your downrigger to the rail of your boat. No cutting or drilling necessary. Just clamp this aluminum mount to the rail and position your downrigger on the base. It can also be used to mount a downrigger to the side of your boat when gunwales won't accommodate deck plates or bases. Should be attached at the "T" joint of the rail.
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
68.99 |
|
|
Stainless Steel Stud Mount Flanged Hand Rail with Mounting Flange - 12"
These Stud Mounted Flanged Hand Rail features integral 5/16”-18 threaded studs and installs with two 5/16”-18 nuts (not included). Constructed of formed 304 stainless steel for corrosion resistance. Design features flanged ends to provide a larger mounting surface for greater durability. Functional and attractive, with no visible mounting hardware.
|
33.85 |
|