Dual Rod Holder/Front Mount Front-mount rod holder fits all 1 5/16" diameter Cannon booms, including telescopic boom. Also fits several other downrigger makes. Each holder has a separate angle adjustment. Comes with two rugged rod tubes with gimbal and drain hole, two aluminum tube clamps, and Lexan® dual-mounting bracked. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

2116 HP Electric Downrigger (36"-60") The number one choice in trolling performance for the charter captain. Equipped with heavy duty, adjustable dual rod holders and all the other great features of our heavy duty, High Performance Downriggers. PRODUCT OVERVIEW:  Unbeatable pulling power lifts 15 lb. weights at 295 ft./min. and 20 lb. weights with ease at 260 ft./min. Includes Illuminated, resettable, sealed and silent digital line counter 300 ft. of 180 lb. Test, HP Stainless Steel Downrigger Cable Dual adjustable and stainless steel jacketed Rocket Launcher Rod Holder (No. 447) Includes Scotty/Marinco™ Plug and Receptacle Includes 1148 Weight Storage Hook and marine grade stainless steel boom Includes 1023 Tilt-up Mounting Bracket which enables the unit to be tilted and locked in the upright position Multi-position auto-stop included (Use 1008 Stopper Beads to stop at any pre-set position) Includes Power Grip Plus Line Release 1/2″ Kevlar drive belt by Optibelt™ – The same belts used by superior European auto manufacturers Clutch brake with the largest braking surface in the industry Includes 1026 Swivel Pedestal Mount with 16 available positions Fully assembled and factory tested with complete saltwater protection Downrigger Boom Length: 36″ – 60″ telescoping stainless steel boom Downrigger Boom Diameter: 1 1/4″ Rod Holder Interior Diameter: 1.70″ WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

No. 1116 Propack Depthpower Downrigger (36"-60") The top choice of charter captains. This unit gives the versatility of a telescoping boom with the Dual Rod Holder option and Swivel Pedestal Mount. PRODUCT OVERVIEW:  Fully adjustable decent speed, lifts 7 lb. weights at 235 ft./min. and 15 lb. weights at 203 ft./min. Spray protected positive-drive depth counter and Kevlar drive belt by Optibelt™ 250 ft. of 150 lb. Test, Stainless Steel Downrigger Cable Includes 247 Dual Rod Holder – Two 10″ tube style rod holders Includes Scotty/Marinco™ Plug and Receptacle The lowest amperage draw of any downrigger made with less than 1/3 the battery draw than some of the competition Includes 1148 Weight Storage Hook and marine grade stainless steel boom Multi-position auto-stop included (Use 1008 Stopper Beads to stop at any pre-set position) Includes 2 Power Grip Plus Line Releases Includes 1023 Tilt-up Mounting Bracket which enables the unit to be tilted and locked in the upright position Includes 1026 Swivel Pedestal Mount with 16 available positions Fully assembled and factory tested with complete saltwater protection Downrigger Boom Length: 36″-60″ telescoping stainless steel boom Downrigger Boom Diameter: 1 1/4″ Rod Holder Interior Diameter:  2 1/8″ WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Rod Holder Gimbal Mount Fillet Table - 20"  Features: Solid one-piece construction for long life and easy maintenance Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage UV stabilized high-density polypropylene construction Medium, 20" wide by 12-5/8" deep, UV stabilized, high-density polypropylene Assembles in minutes, with all assembly hardware included Easily accessible knife and pliers holders Knives and pliers not included

Rod Holder Gimbal Mount Fillet Table - 30"  Features: Solid one-piece construction for long life and easy maintenance Easily adjustable, multi-position gimbaled rod holder mounting system folds flat for easy storage UV stabilized high-density polypropylene construction Large, 30" by 12-5/8" deep with towel bar. UV stabilized, high-density polypropylene Assembles in minutes, with all assembly hardware included Easily accessible knife and pliers holders, large has hose holder and towel bar Knives and pliers not included

Triple Rod Holders Scotty's multiple rod holder comes with a built-in lur and accessory rack, which give you quick access to your lures and tools No. 362 Triple rod holder permanent mount board only

Fillet Table Rod Holder Gimbal Mount  Gimbaled Rod Holder Mounting Accessory works on all of our fillet tables (326510-3, 326515-3, 326580-3, and 326585-3) and comes complete with hardware to mount to the table. Great for mounting a variety of accessories.

Drink Holder Drink holder with bulkhead/gunnel mount and rod holder post mount For cans, coffe mugs and insulated sleeves. Convenient accessory rack to hang lures and tools. Easily removable WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Clamp-On Rod Holder Horizontal Mount - Aluminum - 2.375" - 2-3/8" OD - Black Features: Clamp-On Horizontal Mount Aluminum 2.375" - 2-3/8" OD Black Fits Pipe Size #5

Dual Rod Holder 247 10" tube style rod holder. Gives you the ability to fish with 2 rods without mounting another rod holder. Designed for use with the No. 1026 Pedestal/Swivel Mount (Mounting hardware included). WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

60° Rod Holder Grill Mount  Kuuma's 60° Rod Holder Grill Mount enables you to turn your fishing rod holder into a grill mount.  The mount has a 60° angle and an adjustable height of up to 5".  It fits most 60° rod holders with cross pins.  The mounting plate is constructed of durable Stainless Steel and the extension rod is constructed of resilient Aluminum for strength. Compatible With: All Kuuma grills Features: Allows you to turn your fishing rod holder into a grill mount Adjustable Height Fits most 60° rod holders with cross pins Measurements: 13-inches (height) x 5-inches (width) x 5-inches (depth) Dimensions (H x W x D) - 13" x 5" x 5" Includes all necessary hardware for easy mounting *Sold as an Individual  WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

290 R-5 Universal Rod Holder w/Mount The R-5 Rod Holder has been designed to securely hold your spincaster, spinning, bait caster, level wind and/or fly rod with up to 15lb test.   The 1/4" Stainless Steel lock bar pivots open to allow a quick effortless release of your rod. Features: Easy adjustable lock bar tension Designed and built to withstand all conditions and backed by the Scotty name In the Box: 290 R-5 rod holder 241 Side deck mount *Sold as an Individual

DUAL AXIS ADJUSTABLE ROD HOLDERS DOWNRIGGER MOUNT Mount our dual axis rod holders between the mounting base and swivel base of your Cannon downrigger for unparalleled rod positioning. A pistol grip release allows for quick, one-handed angle changes, and the innovative ratcheting adjustment system allows you to easily pull the holder to a vertical position. Full 360 degree rotation makes it the ultimate fishing accessory. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Allows rod holder to mount into the gunnel of the boat. Alignment key allows for 360 degree pivot while holding rod holder securely in place. Includes water-tight cap.

Baitcaster/Spinning Rod Holder without Mount Holds a bait caster reel in a cushioned cradle. A slot in the front of the rod holder allows for a spinning reel to be securely held in position. The rod holder design has a side-mounted flange, which leaves the bottom open. This allows for the rod holder to accommodate trigger grips. Pistol grip rod butts easily clear the sides of the rod holder for quick rod retrieval. Rod can be secured in a holder with a soft latching strap that snaps over the top. *Comes with no mount, enabling you to choose whichever mount suits your needs separately.