MP Pump 35098 Cent Pump SS 24V

MP Pumps 34296 CENT PUMP SS 24V

MP Pumps 34293 MOTOR 24VDC 3000RPM 316SS MP Pumps FRX 75 SUCTION AND DISCHARGE 3/4" NPT x 3/4" NPT APPLICATION Agricultural, Commercial, Industrial, Marine, OEM, Transportation MATERIALS OF CONSTRUCTION 316 stainless steel FLOW Up to 28 GPM HEAD FEET Up to 32' IMPELLER 316 Stainless steel, Semi-Open (Sintered PM) DRIVE Close coupled 24V DC SEAL Standard seal is carbon

MP Pump 28399 Flomax 8 Pump SS: Ped 5.0 MP Pumps Flomax 8, 2" 140 GPM Stainless Steel Pedestal Mount Self Priming Pump 28399 MP Pumps Flomax 8, 2" NPT self priming centrifugal pumps # 28399. Up to 140 GPM, up to 40 PSI (92'), 3450 RPM, all stainless steel construction. Removable flanges and replaceable wear plates protect the housing and eliminate wear. All fasteners are Stainless Steel. Standard mechanical seal have Viton elastomers. Specifications Rated Capacity 140 GPM Maximum Discharge Head: 92 feet (40 PSI) Suction & Discharge Connections: 2" X 2" FNPT Construction: Stainless Steel housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve with 304 ss, weight 49 lbs.; 304 stainless steel stub shaft; viton mechanical seal. Motor: None Pump Capacity - MP Pumps Flomax 8 Self Priming Pumps At 0 Suction Lift, 3600 RPM HPImp.Capacity At Total Dynamic Head In FeetShut Off 20'30'40'50'60'70'80'90' Gallons Per Minute (GPM) 1-1/24.10"105856020----54' 24.62"12711090704515--74' 35.0"1501401201008060401596'  

March 809 BR HS Mag-Drive Centrifugal Pump Bronze 24V Pump The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated. • Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries. • Maximum liquid temperature for the 809 and 815 series is 250 F. • Port configurations include in-line and center inlet with side discharge. • Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic. • There are many motor options available Including AC, DC and High Speed versions for added flow.     March Pump Mag-Drive Centrifugal Pump Bronze 24VDC High Speed 7.5GPM 1/2"MPT Ports  

MP Pumps FloMax FMX 100 1" x 1" Close Coupled 3/4HP Motor Single Phase 39529 The patented 1” x 1” FMX100 self-priming centrifugal pump is constructed of 316 SS for superior corrosion resistance and compatibility with most fluid types. A type 6A carbon / ceramic / viton mechanical seal is standard. With a maximum flow of over 55 GPM and pressure capabilities of nearly 60 feet, this rugged self-priming pump is capable of 17 feet suction lift when operating at 3450 RPM.   The FMX 100 has numerous applications in industries such as: construction, petroleum, diesel exhaust fluid, marine and marine air conditioning, agriculture for biocides and liquid fertilizers, and numerous industrial applications such as brine and calcium chloride.     Discharge 1" Suction 1" Materials of Construction 316 stainless steel Flow Up to 55 GPM Head Feet 60' Impeller 4.0" Drive Options Close Coupled 1 HP TEFC IEC80B34 Motor Close coupled 3/4HP TEFC IEC80B34 Motor Engine Mount for 3/4" Shaft Pedestal Mount 3/4" Shaft Seal Type 6A carbon/ceramic/viton

Oberdorfer 830B-N24Vdc Cent Pump Brz 1Hp 24Vdc  

  MP Pumps 21380 Flomax 15 NPT Self Priming Centrifugal Pump Pedestal Drive Bronze, 6.0" Impeller, 3" x 3"   MP Pumps Flomax 15, 3" NPT Flomax self priming centrifugal pumps. Up to 300 GPM, up to 125' head (54 PSI), 3450 RPM. Available in all bronze construction.    Removable flanges and replaceable wear plates protect the housing and eliminate wear. All fasteners are Stainless Steel. Standard mechanical seal have Viton elastomers.   Specifications Rated Capacity 300 GPM Maximum Discharge Pressure: 125 feet (54 PSI) Suction & Discharge Connections: 3" X 3" FNPT Construction: Cast iron housing, impeller, removable suction & discharge flanges and wear plate; rubber check valve, 304 stainless steel stub shaft; viton mechanical seal.    This item is 'build to order'.  

MP Pump 21381 FLOMAX 15 Self Priming Centrifugal Pump MP Pumps Flomax 15 Self Priming Centrifugal Pumps for Water & Fertilizer w/ Pedestal Mount FLOMAX self priming centrifugal pumps are capable of creating vacuum sufficient to lift liquids from heights up to 25 feet above the source. Once primed, the pump's built in flapper valve will maintain a full column of liquid in the suction line.   A FLOMAX Pump is a fully assembled and run tested pump end that can be easily coupled to a number of drivers such as hydraulic motors, 56C and 145TC frame motors and gas engines. A bearing pedestal is also available for T-frame motor or belt drive. Standard features include stainless steel drive sleeve, stainless steel fasteners, renewable wear plate, and a semi-open dynamically balanced impeller. Options include double grease-lubricated seals, stainless steel impeller and seals for all types of abrasive and / or corrosive services.   The FLOMAX® series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators & Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   Model: Flomax 15 Part #: MP21381 Size: 3 in. NPT Flow-Rate: 320 GPM Head Feet: 145   Features Material of Construction: Cast Iron Renewable wear plate Stainless steel drive sleeve Stainless steel fasteners Up to a 25' suction lift   Applications Agricultural Industrial Marine OEM  

March 809 BRC HS 24VDC Mag-Drive Centrifugal Pumps Bronze 24VDC High Speed 5.5GPM   The March MAGNE-BOOST Hydronic hot water booster pumps are a non-self priming unit built to handle liquid transfer in heating and cooling operations. Typical applications include home heating systems, solar heating systems, heat recovery systems and recirculating water in domestic and commercial hot water tanks. These pumps are not food rated. • Brewery pump - the March 809 and 815 series of pumps are commonly used by Home Brewers and Breweries. • Maximum liquid temperature for the 809 and 815 series is 250 F. • Port configurations include in-line and center inlet with side discharge. • Construction materials: Bronze, Stainless Steel, Ryton/Polysulfil Plastic. Impellers are Teflon plastic. • There are many motor options available Including AC, DC and High Speed versions for added flow.   March Pump Mag-Drive Centrifugal Pump Bronze Center Inlet 24VDC High Speed 5.5GPM 3/4"MPT Inlet, 1/2"MPT Outlet  

MP Pumps 35643, Petroleum 8 Self Priming Centrifugal Pump 2" x 2" Capable of creating vacuum sufficient to lift liquids up to 25 feet.   PO8PMP C: 3-3 56C FA 5.0 T-21 NRS   Ships via Truck Only. Please use the Contact Us page for a shipping quote.

MP Pumps 36085, HHLF High Head Low Flow Self Priming Centrifugal Pump End Only,   Self priming high head centrifugal pump, for close coupled to an electric motor supplied seperately. Auxiliary Fire Control 46 CFR, Compliant US Coast Guard.   High Pressure USCG Secifications Auxilary Fire Control   HHLF1.5PPK C: CCMTR 1.12 6.5 HR

MP Pumps 21383 FM 15 BRONZE PUMP MP Pumps 21383, FLOMAX 15 Self Priming Centrifugal Pump, Wet End Only FLOMAX series of pumps are commonly used in Industrial, OEM, Agricultural and Marine applications, such as: Bilge Pumps, Auxiliary Fire Pumps, Ballast Transfer Pumps, Washdown Pumps, Fertilizer and Pesticide Pumps, Applicators and Sprayers, Blending Pumps, Nurse Tanks, Bulk Transfer Pumps and much more.   3" X 3" NPT Ports Capacity up to 320 GPM Total Head up to 145 feet Bronze construction 5.75 inch diameter impeller

Series 110 MP Pump 23250 Cast Iron Pump with Pedestal Mount Cast Iron MP Pump 1-1/2" x 1-1/4" End Suction Centrifugal Pump   The SERIES 110 high volume centrifugal pumps are close-coupled to standard NEMA "C" face motors. Open adaptor protects motor. All models are available in cast iron or bronze construction to suit a wide variety of liquids.   All fasteners are stainless steel to reduce corrosion. Impellers are balanced to improve efficiency and bearing life. Standard carbon / ceramic / Viton mechanical seal is self-adjusting and corrosion resistant to handle almost any liquid.   Suction And Discharge 1-1/2" x 1-1/4" NPT Materials Of Construction Cast Iron Pump and Pedestal Flow Up to 130 GPM Head Feet Up to 60' Impeller 4" semi-open Motor Up to 2 HP, Motor not included Drive Options Close coupled 56C, Close coupled 145TC, Max Solid Size .32"   APPLICATIONS: Agricultural, Commercial, Industrial, OEM

MP Pump 24832 Cast Iron Pump MP Pumps 24832, FLOMAX 10 Self Priming Centrifugal Pump End Only, 2" x 2" NPT Ports, Capacity up to 225 GPM, Total Head up to 145 feet. FM10PPK C: CCMTR 1.13 6.0     SUCTION AND DISCHARGE3" x 3" NPT APPLICATIONAgricultural, Industrial, Marine, OEM MATERIALS OF CONSTRUCTION316 stainless steel, Bronze, Cast iron FLOWUp to 320 GPM HEAD FEETUp to 145' IMPELLER6.0" max. diameter, semi-open   MOTORUp to 7.5 HP