|
Portable, simple-to-use interface works on Microsoft PC laptops, Windows tablets or Microsoft Surface tablet running Windows 10. Recommended requirements are Windows 10/Intel I5 Dual Core processor @2.5 Ghz or greater. Recommended I7 Quad Core at 2.5 Ghz or greater/USB 2.0 or USB 3.0 Port/10 GByte of free hard disc space, Recommended 50 GBytes or greater/2 GBytes RAM, Recommended 6 GBytes or greater. Tablets running Windows 10 with a USB port (*Note: Windows 8 RT will not work with M.E.D.S). Processor must be I5 Dual Core at 2.5 Ghz or better/Screen resolution 1360x768 or higher. No need to hassle with entering in the make, model or even the serial number of the engine you're working on. Simply plug in the cable and let M.E.D.S. do the work for you. Bundle includes M.E.D.S. system cable(s), diagnostic port adapter cables, three installations of the M.E.D.S. software on flash drive, and carrying case. DROP SHIPPED DIRECT FROM FACTORY, FREIGHT NOT ALLOWED.
|
4214.08 |
|
|
Mercury Tank Fitting - 1/4" NPT Thread
Connect your tank and fuel lines with confidence; solid machined brass construction holds up to lead, unleaded, and alcohol-based fuels. Specifically designed for Mercury/Mariner Brand engines and tanks.
Features:
Solid machined brass for dependable performance, peace of mind
Quick-connect ¼-inch male thread makes installation easy
Extremely Versatile: Designed for leaded, unleaded, and alcohol-blended fuel
1/4" NPT (National Pipe Thread)
Specifically designed for Mercury/Mariner Brand engines and tanks
*Specifically mates to Attwood part number: 8890LP6
|
7.96 |
|
|
March 893-10-1/4" 24V Pump W/ 1286-0002-0100
|
351.00 |
|
|
Bosworth 75-1 1/4 Foot/Check Vlv 1 1/4 Female
Bosworth- Foot Valve / Check Valve Sea-Lect Gray Delrin, Buna Flapper Valve, 1 1/4” Female Threaded Ports
|
20.36 |
|
|
BURKS 310G5-1 1/4, BURKS CIRCULATION G5 PUMP 230-440V 1HP 3PH
Centrifugal Pump and Motor unit. Bronze Fitted Cast Iron Construction. Close Coupled to a 1 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor. Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.25 Inches.
|
1605.60 |
|
|
BURKS 315G5-1 1/4, Centrifugal Pump 3PH 1 1/2HP 230/460v
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1-1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.75 Inches.
|
1863.90 |
|
|
BURKS 315GA5-1 1/4, Centrifugal Pump 230/460v 3PH 1 1/2HP BF
All BRONZE Construction.
Close Coupled to a 1-1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.56 Inches.
|
1788.30 |
|
|
BURKS 320G6-1 1/4, CENTRIFUGAL PUMP 230/460v 3PH 2HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.13 Inches
|
2059.20 |
|
|
BURKS 320GA5-1 1/4, Bronze Fitted Cast Iron Centrifugal Pump 230/460v
Bronze Fitted Cast Iron Construction. Close Coupled to a 2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 4.88 Inches.
Burks end suction, three phase, close-coupled, bronze fitted, centrifugal pump with mechanical seal. They are ideal for booster service, recirculation, general water supply, and washer lines.
Construction: Casing and bracket are close grain cast iron. Enclosed 4-7/8" bronze impeller, 302 stainless steel motor shaft, single mechanical seal, carbon faces, buna elastomers, 304 stainless steel metal parts.
Connections: 1-1/2" X 1-1/4" female NPT suction and discharge Motor: 2 HP, 3450 RPM, Open drip proof, three phase, 208/230/460 volts, 60 Hz, ball bearings front and back, built-in overload protection.
Clockwise rotation, when facing back of motor. Maximum working pressure: 200 PSI Maximum inlet pressure: 70 PSI Maximum working temperature: 180 degrees Fahrenheit Carton dimension: 14" high, 12" wide, 24" long.
Please Contact us for shipping quote at http://www.clrmarine.com/Contact_Us
|
1794.60 |
|
|
BURKS 330GA6-1 1/4, Centrifugal Pump 230/460v 3PH 3HP
Bronze Fitted Cast Iron Construction. Close Coupled to a 3 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet. Impeller Diameter is 5.5 Inches.
|
2183.40 |
|
|
BURKS 35G5-1 1/4, Centrifugal Pump 3PH 1/2HP 230/460v
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 3.63 Inches.
UNSPSC Code: 40150000
|
1565.10 |
|
|
BURKS 35GA5-1 1/4, CENT PUMP 3PH 1/2HP 230/460v
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 3.44 Inches.
UNSPSC Code: 40150000
|
1431.00 |
|
|
BURKS 37G5-1 1/4, Centrifugal Pump 230/460v 3PH 3/4HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 4 Inches.
UNSPSC Code: 40150000
|
1591.20 |
|
|
BURKS 37GA5-1 1/4, Centrifugal Pump 230/460v 3PH 3/4HP
Centrifugal Pump and Motor unit.
Bronze Fitted Cast Iron Construction.
Close Coupled to a 3/4 Horsepower, 3450 RPM, 230/460 Volts, 3 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 3.81 Inches.
UNSPSC Code: 40150000
|
1460.70 |
|
|
BURKS 5G5-1 1/4, Centrifugal Pump 115/230v 1PH 1/2HP
Bronze Fitted Cast Iron Construction.
Close Coupled to a 1/2 Horsepower, 3450 RPM, 115/230 Volts, 1 Phase Motor.
Ports are 1-1/2 Inches NPT Inlet, 1-1/4 Inches NPT Outlet.
Impeller Diameter is 3.63 Inches.
UNSPSC Code: 40150000
|
1375.20 |
|