20 amp stators for 4 cylinder engines.

Optical sensor replaces OMC 584265, 5849147, 586343.

Digital optical power packs for 4 and 6 cylinder engines.

Includes digital optical power pack, sensor, spark plug wire set.

Oberdorfer 104M-06-10F36BJ-50/60 Low Profile AC Pump Pump Body: Bronze Ports: Inlet: 3/4" NPT Female Outlet: 1/2" NPT Female and 3/4" NPT Male Flow: Up To 24 GPM Maximum Pressure: Up To 23 PSI, 53 feet of head Impeller: Bronze Centrifugal Shaft Seal: Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Water Seal. Buna is Standard, Viton and Teflon available. Shaft: 416 Stainless Steel is Standard, 316 Stainless Steel is an Upgrade, Monel is the Highest Grade of Stainless Steel and is Recommended for Salt Water Marine Use Motor: 1/2 Horsepower, 3450 RPM, 115/230 Volts, Single Phase, ODP (Open Drip Proof). This pump has the Oberdorfer 7881 motor     APPLICATIONS BRONZE CLOSE COUPLED CENTRIFUGAL PUMP This close-coupled pump uses a standard NEMA J-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures. Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.

Sierra hgh performance ignition coils for inboard and inboard/outdrive engines. Oil filled for better cooling and long life. Produces higher voltage needed to run larger spark plug gaps for added power and better fuel economy. Compatible with capacitive discharge systems.

Oberdorfer 104M-06-10F36BJ Centrifugal Pump FEATURES Pump Body: Bronze Ports: Inlet: 3/4" NPT Outlet: 1/2" NPT Flow: 24 GPM Max Pressure: to 23 PSI, 53 feet of head Impeller: Centrifugal Shaft Seal: Teflon Barrier Seal to Protect Motor Bearings. Carbon Face Mechanical Pump Seals. Buna Std., Viton and Teflon available. Shaft: 416 Stainless Steel is standard, Monel Shaft available for Marine Use Motor Drive: Pump heads mount to standard footed NEMA 56J jet pump motors. A wide variety of motors are available and we can assemble for you. This pump has the 10F36BJ-50/60-316SS motor.   APPLICATIONS BRONZE CLOSE COUPLED CENTRIFUGAL PUMP This close-coupled pump uses a standard NEMA C-Flange Jet Pump Motor with weld-on base and threaded shaft end to accept the pump impeller. The pump uses a mechanical type shaft seal with a Buna rubber element. It is suitable for water, oils, and some mild solvents and it is limited to 212 F. Viton® seals and Teflon seals (Chemlon) are available for severe solvents, difficult chemicals, and elevated temperatures.   Will Handle Contaminated Liquids. Extremely Quiet. A Standard in the Marine Air Conditioning Industry.   Oberdorfer Centrifugal Pump, 1/3HP ODP 115/230V Motor 50/60 Hz, with 316SS Shaft    

SHURflo 94-391-06, Valve Assembly EPDM, with 45 PSI Bypass

Fits: OMC 50-60 HP 2-cylinder. Replaces: OMC. 384163, 387684, 389275, 585063, 586280. 9-tooth drive gear. Uses DV371* replacement drive gear, DVK71* 2-piece drive kit (fits current-model starters), SR371 repair kit. *NOTE: New OMC outboard starters use a 2-piece drive assembly while older OMC outboard starters use a 1-piece drive assembly. When ordering starter drives make certain you choose the correct drive because the new and old style OMC drive assemblies are not interchangeable!

Sierra o-rings for Johnson, Evinrude and BRP outboards and OMC Sterndrive and Cobra engines.

Ignition coils for Johnson and Evinrude outboards

Digital optical power packs for 4 and 6 cylinder engines.

Includes digital optical power pack, sensor, spark plug wire set.

Resettable circuit breaker for internal electrical/ignition system.

35 amp stators for 4, 6 and 8 cylinder engines.