|
Jabsco 6980-0011 Pump for Cat 4L5788
|
2134.88 |
|
|
Jabsco 17810-1300 Engine Pump For Cat 3304 3306
|
1642.69 |
|
|
Jabsco 17970-0100 Engine Pump For Cat 3406
|
2353.84 |
|
|
Jabsco Pump Parmax 115V
FEATURES
Pump Body:
Glass Filled Polypropylene, Four Piston, Diaphragm Pump
Port Size:
1/2" (13 mm) Hose Barb, Viton O-ring 1/2" Male Quest, EPDM O-ring
Flow:
Flow to 3 GPM/12 LPM
Pressure:
Continuous 25 psi (1.7 Bar) at 75°F (24°C) Ambient Duty Rating.
Cut-In 25 PSI, Cut-Out 40 PSI.
Elastomers:
Diaphragm: Santoprene
Valves: Viton or EPDM
Motor:
AC Capacitor Start Induction Motor Fan Cooled, Sealed Ball Bearing Thermally Protected, 115VAC, 60Hz, 1phase 1.8 Amp, CSA, UL listed. Conforms to Electromagnetic Compatibility 89/336/EEC and Machinery Directive 89/392/EEC, EN50081-1.
APPLICATIONS / CHARACTERISTICS
This pump provides excellent service where 115VAC 60hz single-phase power is required for operation. The AC capacitor start induction motor dramatically extends motor service life in applications where permanent magnet DC motors would require regular maintenance to replace worn motor brushes. This pump is the clear choice for continuous duty bulk transfer and recirculation applications. Recommended for use with mild acids and bases compatible with the materials of construction. Typical applications include chemical feed, chemical transfer, coolant re-circulation, condensate removal, tank agitation, thermal mixing, filling, flushing, and washdown applications. Pump will self-prime and can be mounted up to 9 feet above the liquid supply level. Pump can run dry without damage. Built-in pressure switch automatically turns pump off when discharge valve is closed. Snap-in ports for easy installation and maintenance.
NOTE: Viton equipped models are not suitable for potable water applications.
Jabsco Industrial Diaphragm Pump 115V Viton Valves, Santoprene Diaphragm
|
628.75 |
|
|
Jabsco Pump 5320-0011 which replaces Westerbeke 11830
This pump offers all the benefits of flexible impeller pumps in a compact size with moderate flow rate and has vertically oriented ports 5.8 gpm (22 lpm) at 10 ft. (3m) total head at 1750 rpm Self-priming to 10 ft. (3m) vertical lift
Fitting: 3/8 in. NTP
Size: 5 15/16 long x 3 1/2 wide x 3 5/18 in. high
Weight: 1 1/2 lbs. (0.7 kg)
Pump with neoprene impeller, full cam, and lip seal
Replaces Westerbeke 11830
FEATURES
Pump Body: Bronze pedestal
Port Size: 3/8" NPT vertical
Flow: 7.3 GPM at 10 feet of head, 2100 RPM
Pressure: Max 17.3 PSI at 40 feet of head, 2100 RPM
Impeller: Neoprene
Shaft Seal: Lip Type
Shaft: Steel
MARINE Pumping bilges, washdowns. Circulating water in bait tanks. Utility dockside pump. Circulating engine raw water.
INDUSTRIAL Circulating and transferring liquids. Velocity-mixing. Pumping coolants on machine tools. Returning spilled liquids to process. Pumping waste water to sewer. Cellar, yards and sump drainage. Chemical manufacturers and pharmaceutical houses- to pump soap, liquors, ink, dyes, medicines, alcohol, various acids, tanning liquors, glycerine, lotions, brine, etc.
|
780.47 |
|
|
Jabsco 6980-3100 Engine Cooling Pump
FEATURES
Pump Body:
Bronze
Port Size:
Flanged Ports
Impeller:
Neoprene
Shaft Seal:
Mechanical
Shaft:
Stainless Steel
APPLICATIONS / CHARACTERISTICS
Engine Cooling Pump.
Jabsco Engine Cooling Pump, 5 cover screws with 3 1/2 inch Impeller depth
Detroit Diesel 671TI 871 1271 23507972 5122599 8924265 23501769
|
2083.42 |
|
|
Jabsco Pump 11870-0011 with 12V Clutch
This electrically activated clutch pump offers all the benefits of flexible impeller pumps with a substantial flow rate and horizontally oriented ports. The electric clutch offers convenient remote activation. This version is specific to those great ice resurfacing machines seen at all hockey games.
Electric: 12V
Ports: 1 1/4"
Impeller: Nitrile
Shaft Seal: Mechanical Carbon-Ceramic, Face Type
Shaft: Stainless Steel
Bearings: Shielded Ball Bearings
|
2202.68 |
|
|
Jabsco 30510-0011 Pedestal Pump Stainless Steel Neoprene Imp. Wet End
Pump Body: 316 Stainless Steel Pedestal Pump
Port Size: 3/4" NPT Internal
Flow: Nominal 8.2 US gallons/min at 1750rpm
Pressure: Pressure up to 1.5 bar
Impeller: Neoprene
Shaft Seal: Carbon
Shaft: 316 Stainless Steel
Port Size: 3/4 Inch NPT Internal
Easy to service and maintain. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Non pulsating flow. Self-priming from dry up to 2.4m (7.8ft).
INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerin, brine, etc.
PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions. Filling line supply pump.
PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries.
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whiskey, wine, rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides.
|
2361.62 |
|
|
Jabsco Pump Peo Ped Ss 1" Hp Neo
FEATURES
Pump Body:
316 Stainless Steel Pedestal Pump
Port Size:
1" NPT Internal
Flow:
Nominal 21.8 USgallons/min at 1750rpm
Pressure:
Pressure up to 1.5 bar
Impeller:
Neoprene, Nitrile, Viton or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic, or Tungsten Carbide; Nitrile or Viton
Shaft:
316 Stainless Steel
APPLICATIONS / CHARACTERISTICS
Easy to service and maintain. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Non pulsating flow. Self-priming from dry up to 2.4m (7.8ft).
INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerine, brine, etc.
PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions. Filling line supply pump.
PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries.
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whiskey, wine, rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides.
Jabsco Pedestal Pump 316SS 1" NPT High Pressure Neoprene Impeller Carbon Seal
|
2308.14 |
|
|
Jabsco Pump Peo Ss Ped 1 1/2"
FEATURES
Pump Body:
316 Stainless Steel Pedestal Pump
Port Size:
1 1/2" NPT Internal
Flow:
Nominal 54 USgallons/min at 1750rpm
Pressure:
Pressure up to 1.5 bar
Impeller:
Neoprene, Nitrile, Viton or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic, or Tungsten Carbide; Nitrile or Viton
Shaft:
316 Stainless Steel
APPLICATIONS / CHARACTERISTICS
Easy to service and maintain. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Non pulsating flow. Self-priming from dry up to 2.4m (7.8ft).
INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerine, brine, etc.
PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions. Filling line supply pump.
PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries.
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whiskey, wine, rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides.
Jabsco Pedestal Pump 316SS 1 1/2" NPT High Pressure Neoprene Impeller Carbon Seal
|
3667.99 |
|
|
Jabsco Pump Peo Ss 2" Ped Hp Neo
FEATURES
Pump Body:
316 Stainless Steel Pedestal Pump
Port Size:
2" NPT Internal
Flow:
Nominal 105 USgallons/min at 1750rpm
Pressure:
Pressure up to 1.5 bar
Impeller:
Neoprene, Nitrile, Viton or EPDM
Shaft Seal:
Mechanical; Carbon-on-Ceramic, or Tungsten Carbide; Nitrile or Viton
Shaft:
316 Stainless Steel
APPLICATIONS / CHARACTERISTICS
Easy to service and maintain. Will tolerate abrasive wear. Handles hard and soft solids without clogging. Non pulsating flow. Self-priming from dry up to 2.4m (7.8ft).
INDUSTRIAL: Circulating and transferring, velocity-mixing, pumping machine tool coolants, spill return, sump drainage, chemicals, pharmaceuticals, soap, liquors, ink, dyes, alcohol, dilute acids, tanning liquors, glycerine, brine, etc.
PHARMACEUTICAL: Processing medicines, lotions and preparations. Filtering pharmaceutical solutions. Filling line supply pump.
PAPER PROCESSING: Transferring and applying starches, sizes, etc. Circulating and processing wood pulp slurries.
FOOD, BEVERAGE & DAIRY: Transfer brines, vinegar, syrups during processing, liquids containing solids in suspension such as chopped tomatoes, nuts, etc. Removal of distillery wort and brewery slop. Processing viscous materials such as peanut butter, mayonnaise, ketchup, honey, etc. (low speed). Pumping whiskey, wine, rums, juices and ciders.
AGRICULTURAL: Transferring liquid fertilizers, herbicides and pesticides
Jabsco Pedestal Pump 316SS 2" NPT High Pressure Neoprene Impeller Carbon Seal
|
5234.11 |
|
|
Major Rebuild Kit for Jabsco 6980-0011
This kit contains the following items
DD 5112143
2
GASKET AFTERMARKET
DD 519BRG
1
DETROIT BEARING
JA 12062-0000
1
ENDCOVER BRASS
JA 17936-0001-B
1
IMPELLER KIT NEO BULK EACH
JA 18718-0000
1
RETAINING RING
JA 2574-0000
1
WEARPLATE
JA 3181-0000
1
SLINGER (1 PER BAG)
JA 4009-0000
1
GASKET
JA 6408-0000
1
SEAL
JA 6988-0000
1
CAM
JA 816-0000
1
GASKET 0.020 THICK VEG FIBR
JA 817-0000
1
LIP SEAL
JA 91005-0040
6
SCREW SLT HEAD (1 PER BAG)
JA 91402-0230
1
WOODRUFF KEY
This kit is put together at time of order.
|
592.93 |
|
|
Minor Repair Kit for Jabsco 6980-0011
This kit contains the following items
JA 17936-0001-B
1
IMPELLER KIT NEO BULK EACH
JA 6408-0000
1
SEAL
JA 816-0000
1
GASKET 0.020 THICK VEG FIBR
This kit is put together at time of order.
|
187.92 |
|
|
Jabsco 33760-0000 Hand Bilge Pump
FEATURES
Pump Body:
Brass
Port Size:
Inlet: 3/4" Garden Hose, 1/2" Hose or 1" Hose
Flow:
7 Strokes/Gallon to 40 Strokes/Gallon
Elastomers:
Neoprene
APPLICATIONS / CHARACTERISTICS
Jabsco hand pumps. Pump more liquid with less effort! They never need coaxing or priming and give full suction on the first stroke. Pumps can be used In any position. Uses include bilge pumping, oil draining, diesel fuel transfer, and many other liquid transfer applications. NOTE: Oil temperature should not exceed 140° F. Long life brass cylinders, high-quality oil resistant plungers, intake and discharge caps are used. Some models include hose(s) or adjustable mounting brackets. Available in two sizes with 1-3/4" and 1-1/4" diameter cylinders.
Jabsco Hand Bilge Pump 1-1/4" Diameter x 17" Long, Intake: Open Ended Pump Body, Discharge: 1/2" Hose Barb, 15 Strokes Per Gallon, with 5' of 1/2" Discharge Hose, No Intake Hose Adapter
|
99.83 |
|
|
|
7.34 |
|