|
Iwaki MD0502 Rear Casing for Iwaki WMD-30LZT-115
|
26.39 |
|
|
IWAKI MD0064, CASING REAR 30/40 R, RX
|
24.10 |
|
|
IWAKI MD0368 CASING REAR 2MD-6/10
|
17.21 |
|
|
IWAKI MDH0832 CASING REAR MDH-400 CV-D
|
70.72 |
|
|
IWAKI MDH0851 CASING REAR W/ SPINDLE
|
167.96 |
|
|
IWAKI MD0246 CASING FRONT MD-6 10
|
17.21 |
|
|
IWAKI MD0317 CASING FRONT 30RT 40RT NPT
|
26.39 |
|
|
IWAKI MX-F403CFVX 2 X 1.5 MX-F PUMP LESS MOTOR
The MX Series pumps of magnetic drive pumps represent the latest state of the art design in non-metallic magnetic drive pumps.
Self-radiating structure – When fitted with a carbon bearing, the MX will allow for brief periods of dry running. The new “self radiating structure” (patented), in addition to the existing proven non-contact principle with front and rear supported spindle, greatly improves the ability to withstand cavitation and running against a closed discharge valve.
Split volute casing – The MX Series is the first resin magnet pump that uses a split volute pump casing that forms a vortex chamber. The volute limits the liquid flow from the impeller and returns it to the pump, which is efficiently guided to the discharge port to enhance overall efficiency.
MX Series pumps are highly recommended for use in various production processes such as filtering, spraying, washing, plating, chemical transfer/blending, and etching in surface treatment applications.
Suction Port: 2"
Discharge Port: 1.5"
Max GPM: 130
Used for
Chemical Blending
Water Treatment
Plating
Sodium Hypochlorite Generators
Bio-Fuels
Desalination
Fume Scrubbers
|
2863.96 |
|
|
IWAKI MD-0763 FRONT CASING 15R HOSE
|
20.66 |
|
|
Iwaki WMD-30RLT, 3/4 inch MPT input and outlet 480gph 115v
Iwaki WMD 30RLT Water Pump
Magnetically driven seal-less water pumps for use on fresh or saltwater aquariums.
Iwaki Walchem magnetic drive pumps will run longer, quieter and cooler than any traditional mag drive. Extraordinarily high efficiencies make WMD & MD the clear choice in almost every process, recirculation or transfer application.
The unique internal cooling circuit creates a positive, forced cooling path, lubricating bearing surfaces and actively purging gases & heat. The unique double bearing system allows cooling circuit liquid to continually "wash" front and rear radial bearings, extending bearing life.
Substantially reduced hydraulic noise is a major feature of all WMD/MD impellers. Great pains are taken in the molding/finishing process to eliminate tangential misalignment.
High lubricity fluoropolymer bearings minimize mechanical losses typical of conventional mag drive pumps. High purity SiC radial bearings handle the most aggressive ultrapure chemistries. PTFE front thrust surface aids hydraulic balance and minimizes flashing. Large rear thrust surface guards against axial forces caused by cavitation or gas entrapment.
Dynamically balanced barium ferrite drive magnets provide best magnet torque. Die cast magnet carrier creates a flywheel effect, which adds to the magnet safety factor.
American motor pressure rated water pump.
3/4 inch MPT inlet and outlet.
1/16 HP Motor output.
3150 RPM motor speed.
120 volt
1.00 amps.
Max flow 10.0 GPM.
480 GPH at 6 feet of head.
Max head 17.7 ft.
Max system pressure 11.60 psi.
WMD pumps have American Made Motors
MD pumps have Japanese Made Motors
RLT pumps are for pressure applications
RZT pumps are for very high pressure applications
RLXT pumps are for circulation and wet or dry return
|
339.04 |
|
|
IWAKI 2KBA-3ZBU1, PUMP DOUBLE BELLOWS 100V
Blow-molded polypropylene bellows ensuring even wall thickness for long life
Easy output adjustment, Simple liquid end construction assuring trouble-free pumping
Anti-syphon spring (Hastelloy C) available
Sure-seating elastomeric poppet valves provide positive backflow protection
Optional duckbill valves for slurries
Thermoplastic motor housing, Stainless steel or non-metallic frame
DC motor options available
Addressing the specific requirements of equipment manufacturers, Iwaki America has developed a full line of economical, versatile, OEM and Multiplex pumps featuring rugged gear-motor drives and flexible designs. Proven performers, Iwaki America bellows pumps are extensively used in the photographic, plating and electronics industries.
|
377.52 |
|
|
IWAKI 2KBA-3ZBU2, PUMP DUPLEX BELLOWS
Blow-molded polypropylene bellows ensuring even wall thickness for long life
Easy output adjustment, Simple liquid end construction assuring trouble-free pumping
Anti-syphon spring (Hastelloy C) available
Sure-seating elastomeric poppet valves provide positive backflow protection
Optional duckbill valves for slurries
Thermoplastic motor housing, Stainless steel or non-metallic frame
DC motor options available
Addressing the specific requirements of equipment manufacturers, Iwaki America has developed a full line of economical, versatile, OEM and Multiplex pumps featuring rugged gear-motor drives and flexible designs. Proven performers, Iwaki America bellows pumps are extensively used in the photographic, plating and electronics industries.
|
377.52 |
|
|
IWAKI KBA-3ZBU2, PUMP SINGLE BELLOWS 115V
Addressing the specific requirements of equipment manufacturers, Iwaki America has developed a full line of economical, versatile, OEM and Multiplex pumps featuring rugged gear-motor drives and flexible designs. Proven performers, Iwaki America bellows pumps are extensively used in the photographic, plating and electronics industries.
Blow-molded polypropylene bellows ensuring even wall thickness for long life
Easy output adjustment, Simple liquid end construction assuring trouble-free pumping
Anti-syphon spring (Hastelloy C) available
Sure-seating elastomeric poppet valves provide positive backflow protection
Optional duckbill valves for slurries
Thermoplastic motor housing, Stainless steel or non-metallic frame
DC motor options available
|
245.44 |
|
|
IWAKI MD0309 FRNT CASING 15R NPT
|
21.80 |
|
|
Iwaki MD0313 Front Casing MD-20RZT, 30RZT
|
24.10 |
|