|
Calpeda MXHM404A Horizontal Multi-Stage Pump 230/50/1 1Hp
Calpeda’s MXH series are horizontal multi-stage close coupled pumps in chrome-nickel stainless steel. They have a compact and robust construction, without protruding flange and with single-piece lantern bracket and base. They come complete with a single-piece barrel casing, with front suction port above pumps axis and radial delivery at top. The filling and draining plugs are on the middle of the pump, accessible from any side.
Part Number: 1041000
Family: MXH Series
Power Source: Electric
Fluid Inlet: 1 1/4"
Fluid Outlet: 1"
Porting: BSP
Material: 304 Stainless Steel
Motor Details: 230/400/1/50
kW : 0.75
HP : 1
Pump Orientation: Horizontal
Number Of Poles: 2
Mechanical Seal: Ceramic alumina - carbon - EPDM
For water supply.
For clean liquids, without abrasives, which are non-aggressive for stainless steel (with suitable seal materials, on request).
Universal pump, for civil and industrial applications, for garden use and irrigation.
|
1260.00 |
|
|
Calpeda BCM22/A Motor and Pump
Calpeda's BC-series monobloc centrifugal pumps are complete with open impeller. Available in either cast iron or bronze, single-phase or three-phase.
Close-coupled centrifugal electric pumps with open impeller.
Backward (vortex) impeller for type C 16/1E.
C: version with cast iron pump body and fitting.
B-C: version with bronze pump body and fitting.
Bronze pumps are supplied fully painted.
For liquids moderately charged with impure emulsions.
For industry and agriculture.
For Marine AC Water Pump
Liquid temperature from -10 °C to +90 °C.
Ambient temperature up to 40 C.
Total suction lift up to 8 m.
Maximum permissible working pressure: 6 bar.
Maximum size of solids: 4 mm.
Continuous duty.
|
1057.20 |
|
|
Calpeda NM2/A 07H36S Centrifugal Pump 3Ph 3/4Hp
The motor of the Calpeda NM2/A 07H36S centrifugal pump has a power rating of three-quarters horsepower.
Calpeda Model number is NM 2/A-60
Three-phase 230/460 V
Insulation class F
Protection IP 44
Pump casing: Cast iron
Lantern bracket: GJL 200 EN 1561
Impeller: Brass CW510L (lead-free public LAW 111-380)
Shaft: Cr steel AISI 430
Cr Ni steel AISI 302 for 1 - 1.5 - 2.5 - 3 HP
Mechanical seal: Carbon- Ceramic- NBR
Liquid temperature from 14 F to 194 F
Ambient temperature up to 104 F
Total suction lift up to 23 ft
Maximum permissible working pressure up to 145 psi
(232 psi for pumps NMD)
Continuous duty
For clean liquids without abrasives, which are, non-aggressive
For the pump materials ( solids content up to 0.2%)
For water supply
For heating, air-conditioning, cooling, and circulation plants
For civil and industrial applications
For irrigation
|
790.02 |
|
|
Calpeda CM22/A Motor and Pump
Close-coupled Centrifugal Pump with open impeller
Single Phase 230v with Thermal Proctector.
Capacitor is inside the terminal box
|
783.60 |
|
|
Sta-Rite MSE-7 Vertical Multi-Stage Jet Pump 1HP
Sta-Rite- Vertical Multi-Stage Jet Pump, Convertible, Cast Iron Construction, 1HP 115/230V Motor, 1-1/4" Suction and Drive Ports, 1" Discharge Port, 40/60psi Pressure Switch, For Shallow or Deep Wells
|
1532.88 |
|
|
March 815 PL C Beer Pump
March Pump’s industrial 815-PL-C is an American seal-less centrifugal magnetic drive pump ideal for applications such as home brewing and hot water systems. It is capable of generating a maximum flow of 8 gallons per minute at 3 feet, and its maximum head is 18.6 Feet (8PSI).
At 60Hz
SystemUS Metric
Max Flow8 GPM 30.3 LPM
Max Head18.6 FT 5.7 M
Power0.04 HP 0.029 KW
At 50Hz
USMetric
7.9 GPM30 LPM
13.5 FT4.1 M
0.04 HP0.029 KW
Electrical: 115V 50/60Hz or 230V 50/60Hz
Inlet: 3/8"FPT & 3/4"MPT
Outlet: 1/2"MPT
Wet End: Polysulfone (Front Housing), Stainless Steel (Rear Housing and Shaft), Teflon (Thrust Washer), Silicone (O-Ring), Ryton/Teflon/Glass (Impeller)
Max Internal Pressure: 50 PSI / 3.4 bar
Max Liquid Temperature: 250 °F / 121 °C
Applications for the 815-PL-C Magnetic Drive Pump include home brewing, hot water systems, solar heating, and fryers.
The 815-PL-C has pumped Cutting Oils, Ethylene Glycol, Hot Water, Hot Wort and Salt Water.
|
332.48 |
|
|
Tuthill 2C2F-C Pump 9Gpm Direct Mount
Cast Iron Rotary Gear Pump
Pump End Only
8 GPM C Series
Cast Iron Construction
Flange mount
Clockwise rotation only (from shaft end view)
Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT
|
652.38 |
|
|
Tuthill 1LEK-C-7 Pump 3.2Gpm with Outer Bearing
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction NO motor
Outboard Ball Bearing on Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
732.36 |
|
|
Tuthill 1LEV-C-A-7 Pump 3.2Gpm Tang Shaft
Cast Iron Rotary Gear Pump
Pump End Only
L Series Pump
Cast Iron Construction
NO motor
Has Internal Relief Valve. Relief valve is set at 55 PSI (can be adjusted in field)
Clockwise rotation only (from shaft end view)
Tang Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
724.80 |
|
|
Tuthill 1LEV-C-7 Pump 3.2 Gpm
Cast Iron Rotary Gear Pump
Pump End Only
Tuthill L Series Pump
Cast Iron Construction
Has Internal Relief Valve
Relief valve is set at 55 PSI (can be adjusted in field).
Clockwise rotation only (from shaft end view)
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
724.80 |
|
|
Tuthill 2LEK-C-7 Pump 6.2Gpm 1/2"Ports
Cast Iron Rotary Gear Pump. Pump End Only.
L Series Pump
Cast Iron Construction
Clockwise rotation only (from shaft end view).
Outboard Ball Bearing on Shaft
Inlet Port is 1/2 inch NPT
Discharge Port is 1/2 inch NPT
Positive Displacement, Internal Rotary Gear Design
Open Flow at 1800 RPM : 5.6 GPM at 1800 RPM
Standard Discharge Pressure: up to 500 PSI
Inlet Pressure: up to 280 PSI
Maximum Differential Pressure: 300 PSI
Temperature: up to 375 F
Typical Viscosity Range: 40 to 1000 SSU
|
728.88 |
|
|
Tuthill 2C2B-C-7 Mechanically Sealed Pump
Tuthill 2C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 8 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1 inch NPT, Discharge Port is 1 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Mechanical Seal Viton
Port Size:Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT.
|
845.58 |
|
|
Tuthill 2C2EN-C-7 Pump 9Gpm W/Outer Bearing
Cast Iron Rotary Gear Pump
Pump End Only
8 GPM
C Series Pump
Cast Iron Construction
NO motor
Ball Bearing on Shaft
Clockwise rotation only (from shaft end view)
Inlet Port is 1 inch NPT
Discharge Port is 1 inch NPT
|
830.28 |
|
|
Tuthill 3C2EN-C-7 Pump 18Gpm 1 1/4 W/Outr Brg
Cast Iron Rotary Gear Pump
Pump End Only, 17 GPM
C Series Pump
Cast Iron Construction
Ball Bearing on Shaft
Clockwise rotation only (from shaft end view)
Inlet Port is 1-1/4 inch NPT
Discharge Port is 1-1/4 inch NPT
|
1359.66 |
|
|
Tuthill 4C2B-C-7 Pump 36 Gpm 1 1/2Ports
Tuthill 4C2B-C-7, Cast Iron Rotary Gear Pump. Pump End Only. 36 GPM C Series. Cast Iron Construction NO motor. Flange mount. Clockwise rotation only (from shaft end view). Inlet Port is 1-1/2 inch NPT, Discharge Port is 1-1/2 inch NPT.
Features :
Pump Body:Cast Iron
Shaft Seal:Mechanical Seal Viton
Port Size:Inlet Port is 1-1/2 inch NPT
Discharge Port is 1-1/2 inch NPT.
|
1174.02 |
|