|
Cat Pump O'Ring Valve Plug Buna
|
2.28 |
|
|
|
1.76 |
|
|
|
2.28 |
|
|
|
2.73 |
|
|
|
4.25 |
|
|
Cat Pump 2SFQ25SEEL Direct Drive Plunger Pump with 8110 Motor.
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 2.5 gpm / 9.5 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
Lead time about one week, this is a Special Order Item
|
1920.48 |
|
|
Cat Pump Valve Check W/Nbr O'Ring
|
13.38 |
|
|
Cat Pumps 7537 Unloader Valve
This Pressure Sensitive Regulating Unloader is designed for single or multiple pump, weep or multi-nozzle systems. This unloader maintains set system pressure and goes into by-pass with the release of the trigger or an obstruction downstream. Pressure is held in the line during by-pass with full pressure when the gun is opened or the obstruction cleared and minimal pressure fluctuation with the alternating use of multiple guns. 5-10% by-pass is necessary for optimum performance (white spring).
Technical Specifications
Max Flow: 21
Min Pressure: 230
Max Pressure: 2600
Inlet Port Size: 1/2"NPT(F)
Discharge Port Size: 1/2"NPT(F)
Type of Accessory: Unloader
Material: Brass (BB)
|
232.38 |
|
|
Cat Pump 2SF10ES Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with brass manifolds, 304 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
2SF Series pumps are hollow-shafted and designed to bolt directly to either a C-face electric motor or gas engine, depending on the model, providing an easy, compact installation.
Technical Specifications
Max Flow: 1 gpm / 3.8 lpm
Max Pressure: 2000
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(M)
RPM: 3450
Drive Type(s): Direct
Material: Brass
|
606.00 |
|
|
Cat Pump 2SFQ25SEEL Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 2.5 gpm / 9.5 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
|
1335.36 |
|
|
Cat Pump 2SFQ29SEEL Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 2.85 gpm / 10.8 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
|
1335.36 |
|
|
Cat Pump 2SFQ35SEEL Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Cat Pumps “Q” pump models reduce sound levels by -6 dBa (decibels). With “Q” model pumps and other noise reduction measures, equipment builders can supply quiet, pleasing equipment to their customers.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 3.5 gpm / 13.2 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
|
1335.36 |
|
|
Cat Pump 7595 Relief Valve
The CAT Pump 7595 is a high flow pressure relief valve constructed with brass. Mounts directly into the discharge line. Provides protection to the pump and system against deadhead and excessive pressure. Ability to set the system pressure for single and multiple gun and pump systems.
Specifications:
Max Flow: 53 GPM
Min Flow: 1 GPM
Max Pressure: 2600 PSI
Maximum Relief Setting: 2860 PSI
Inlet Port Size: 3/4" NPT(F)
Discharge Port Size: 1/2" NPT(F)
Accessory Type: Relief Valves
Material: Brass
By-Pass Port: 1/2" NPT(F)
Dimensions: 6.25 x 2.05 x 1.46
Features:
Provides system pressure setting and protection for single or multiple gun and pump systems.
Heavy duty, high flow design quickly and conveniently mounts directly into discharge line.
Functions as a secondary pressure relief to assure system and pump protection from deadhead or excessive pressure.
NBR O-rings
|
279.70 |
|
|
Cat Pump 2SF22ELS DIRECT DRIVE PLUNGER PUMP
This is a Cat Pump triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of a Brass manifolds, 304SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o'rings. This is a hollow-shafted pump designed to bolt directly to a c-face electric motor, providing easy, compact installation.
Technical Specifications
Max Flow: 2.2
Min Pressure: 100
Max Pressure: 2000
Inlet Port Size: 3/8"NPT(F)
Discharge Port Size: 3/8"NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: Brass (BB)
|
615.75 |
|
|
Cat Pump 2SF05SEEL Direct Drive Plunger Pump
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.
Stainless steel 2SF Series pumps are hollow-shafted and designed to bolt directly to a 56C-face electric motor, providing an easy, compact installation.
Technical Specifications
Max Flow: 0.5 gpm / 1.9 lpm
Max Pressure: 1200
Inlet Port Size: 3/8" NPT(F)
Discharge Port Size: 3/8" NPT(F)
RPM: 1725
Drive Type(s): Direct
Material: 316 Stainless Steel
|
1335.36 |
|