|
Cal MS-1200-6B Pump 1200Gph 115V with Base and Cord
Centrifugal Pump Stainless and Bronze Body
1200GPH No Flow Control
115V 60Hz with 6 Foot Power Cord
3/4" Male NPT Inlet and 1/2" Male NPT Outlet
Viton Seal
Can Run in Open Air or Submersed
For Fresh or Salt Water up to 110F
Can Be Used With Marine AC Units up to 60,000BTU
Approved for: UL, CE, ABYC and USCG
Includes 2 Nylon Mounting Brackets
|
456.00 |
|
|
Cal MS-900-6B Pump 900Gph 115V W/Base
Cal Pump Centrifugal Pump, Stainless and Bronze Body, 900GPH No Flow Control, 115V 60Hz with 6 Foot Power Cord, 3/4" Male NPT Inlet and 1/2" Male NPT Outlet, Viton Seal, Can Run in Open Air or Submersed, For Fresh or Salt Water up to 110F, Can Be Used With Marine AC Units up to 36,000BTU, Approved for: UL, CE, ABYC and USCG. Includes 2 Nylon Mounting Brackets
|
453.96 |
|
|
Cal Pump MS-580-20 Pump 580Gph 115/120V 20'Cord
Cal Marine Pumps are certified to the following standards: UL, CE, ABYC and U.S. Coast Guard
Premium stainless steel and bronze construction for longevity
115 Volts - 20ft power cord - 3 wire; black, white, green ( NO PLUG ON END )
Suitable for fresh, salt or chlorinated water applications (max of 3-5 ppm)
Can be used in hot water applications up to 110°F
Extremely quiet operation
Use submerged or in open air (below water level)
Viton seals suitable for harsh marine applications
3/4" MPT Intake and 1/2" MPT Discharge
Approximate dimensions: 4-1/2" x 6-1/4"
|
416.52 |
|
|
Cal MS-580-20-2B Pump 580Gph 230V 50/60
Cal Pump Centrifugal Pump, Stainless and Bronze Body, 580GPH No Flow Control, 230V 50/60Hz with 20 Foot Power Cord, 3/4" Male NPT Inlet and 1/2" Male NPT Outlet, Viton Seal, Can Run in Open Air or Submersed, For Fresh or Salt Water up to 110F, Can Be Used With Marine AC Units up to 24,000BTU, Approved for: UL, CE, ABYC and USCG. Includes 2 Nylon Mounting Brackets
|
444.60 |
|
|
Cal Pump MS320P-6B SS/Bronze Pump 375Gpm 115V
Cal Marine are certified to the following standards: UL, CE, ABYC and U.S. Coast Guard
Premium stainless steel and bronze construction for longevity
115 Volts - 6ft power cord - 3 wire; black, white, green
Suitable for fresh, salt or chlorinated water applications (max of 3-5 ppm)
Can be used in hot water applications up to 110°F
Extremely quiet operation
Use submerged or in open air (below water level)
Viton seals suitable for harsh marine applications
1/2" MPT Intake and 1/4" MPT Discharge
Approximate dimensions: 3-3/4" x 4-1/2"
One year warranty
Pump Applications:
Ideal for harsh marine applications
|
304.98 |
|
|
Cal MS-900-6-2B Pump 900 Gph 220V W/Base
Cal Pump Centrifugal Pump, Stainless and Bronze Body, 900GPH No Flow Control, 230V 50/60Hz with 6 Foot Power Cord, 3/4" Male NPT Inlet and 1/2" Male NPT Outlet, Viton Seal, Can Run in Open Air or Submersed, For Fresh or Salt Water up to 110F, Can Be Used With Marine AC Units up to 36,000BTU, Approved for: UL, CE, ABYC and USCG. Includes 2 Nylon Mounting Brackets
|
436.02 |
|
|
Cal Pump MSUBM Nylon Bracket Fits All But 225 320
Nylon Mounting Brackets for 580, 900 and 1200 Pumps. Includes One Pair of Brackets.
|
57.46 |
|
|
Cal Msr-12 Repair Kit For 1200
Cal Pump Repair Kit for MS-1200 MS1200 Pumps, includes: Impeller, Volute, O-Ring, Hardware. No Flow Control Valve
|
53.89 |
|
|
Primetime 115volt Pump
The Primetime Pump is a high performance self-priming 316 stainless steel centrifugal pump. The pump is ideal for marine, industrial, agricultural or commercial applications where suction lift is required.
Primetime features all 316 stainless steel components for superior corrosion resistance when pumping sea water or chemical compounds. A carbon / ceramic / Viton mechanical shaft seal is standard. Ports are 3/4” NPT with a 1/8” NPT fill port. The Primetime model is capable of 12 foot suction lift (3450 rpm). Marine ignition protected motors (ISO 8846).
Applications
Marine Pump used as a Fresh water pump, Air Conditioning pump, Refrigeration pump, RO pre pump, Gyroscope stabilization cooling, Agricultural pump, and Industrial pump.
SPECIFICATIONS:
Flow………………………Up to 21 GPM
Head Feet…………….Up to 23’
Housing……………….316 Stainless Steel (Investment Cast)
Cover……………………316 Stainless Steel
Impeller……………….316 Stainless Steel Semi-Open
Wearplate……………316 Stainless Steel
Mechanical Seal… Carbon / Ceramic / Viton Bellows
O-ring/Flapper…….Viton
Weight…………………18 lbs
|
748.95 |
|
|
Cal Msub SS Mounting Bracket
Cal Pump SS Mounting Bracket for MS225 and MS320 Pumps.
Stainless steel construction
All metal
|
58.57 |
|
|
Little Giant Mag-Drive Pump 566716
Little Giant PES-130-PW Magnetic Drive Statuary Fountain Pump
Motor 120 Volt 60 Hz Epoxy Encapsulated Motor, 130 GPH at 1 Foot Head, Shutoff Head 5.5 Feet, Inlet: Screened, Outlet: 3/8" or 1/2" Hose Barb, Adjustable Flow Control, 6 Foot Power Cord
566716 Mag-drive pumps utilize an epoxy-encapsulated motor and plastic housing. A permanent magnet is attached to the impeller and acts as the rotor would in a conventional motor. The water being pumped surrounds the rotor. They are seal-less and oil-less
|
53.82 |
|
|
Little Giant Submersible Pump 518020
Little Giant 1-EAYS Submersible Partswasher Pump
Motor 115 Volt 60Hz 1/125 HP Epoxy Encapsulated Motor, 170 GPH at 1 Foot Head, Shutoff Head 7 Feet, Inlet: Screened, Outlet: 1/4" MNPT, Nylon Body, Viton Seal, Fluid Temperature Up to 100F (38C), UL Listed, 6 Foot Power Cord
518020 Epoxy encapsulated, centrifugal pump is designed to be used in submerged parts washer applications only. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point no lower than 100 degrees F
|
180.96 |
|
|
Little Giant Submersible Pump 502020
Little Giant 2E-NYS Submersible Pump
Motor 115 Volt 60 Hz 1/40 HP Permanently Lubricated Oil Filled Motor, 300 GPH at 1 Foot Head, Shutoff Head 11.8 Feet, Inlet: Hooded or Screened, Outlet: 1/4" MNPT and 1/2" Tubing, Aluminum Housing, Nylon Body, Viton Seal, Fluid Temperature Up to 100F (38C), UR Listed, 6 Foot Power Cord
502020 Designed for submerged use only, this pump is intended for use in UL-listed parts cleaners. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F.
|
241.80 |
|
|
Little Giant Submersible Pump with 6' Cord
Little Giant 3E-12NR Submersible or In-Line Pump
115 Volt 60Hz 1/15 HP Permanently Lubricated Oil Filled Motor,
670 GPH at 1 Foot Head, Shutoff Head 22.6 Feet,
Inlet: 1/2" FNPT or Screened,
Outlet: 1/2" MNPT and 3/4" Tubing,
Epoxy Coated Aluminum Housing, Nylon Body, Viton Seal,
Fluid Temperature Up to 120F (49C), UL Listed, 6 Foot Power Cord
Item #
Model
Volts
Cord
Protection
503203
3E-12NR
115
6 ft.
Thermal overload
503203 Dual purpose oil-filled pump that may be used totally submersed or in-line (fed with pipe or hose). For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated.
It is not recommended to use the 3E series in aquariums, swimming pools and fuel oil transfer applications.
|
372.06 |
|
|
Little Giant Submersible Pump 505025
Little Giant 5-MSP w/25' Cord Submersible Pump
Motor 115 Volt 60 Hz 1/6 HP Permanently Lubricated Oil Filled Continuous Duty Motor, 1200 GPH at 1 Foot Head, Shutoff Head 26.3 Feet, Inlet: Screened, Outlet: 1" MNPT with Garden Hose Adaptor, Epoxy Coated Aluminum Housing, Nylon Body, Viton Seal, Manual Operation, Fluid Temperature Up to 120F (49C), 25 Foot Power Cord
505025 For commercial, industrial and home applications including statuary fountains, water displays, air conditioners, machine tool coolants, and many other applications where liquid must be transferred or recirculated
|
243.36 |
|