Cal Pump 305626012 Large Bracket S/MS580/900/1

Groco C-60 12V Deck Wash Pump, 12Volt  Groco- Deck Wash Vane Pump System 6.5GPM 20-40psi 12VDC   More Info: C60

Groco C-60 24V Deck Wash Pump, 24Volt  Groco- Deck Wash Vane Pump System 6.5GPM 20-40psi 24VDC   More Info: C60

Cal Pump 305626005 Repair Kit for MS320P

Cal Msr-12 Repair Kit For 1200  Cal Pump Repair Kit for MS-1200 MS1200 Pumps, includes: Impeller, Volute, O-Ring, Hardware. No Flow Control Valve

Cal Pump 305626011 Small Bracket For S/MS320

  The Rule-Mate Series of Bulge Pumps feature a solid state water sensing technology that eliminates the need for a seperate float switch.  When water enters the bilge and reaches a certain height (2-3/4") a sensor turns the pump on.  After the water is pumped out, another sensor shuts the pump off.  The sensor's unique “field effect” technology will only recognize water. If a 100% concentration of oil is detected the pump will not activate. This is not a zero discharge prevention system. The result is the most technically advanced bilge pump available in the marketplace.     Now you can experience all the comforts of home at sea with Jabsco range of Deluxe Flush Marine Toilets.  Jabsco is proud to announce the launch of the complete range of Deluxe Flush luxury marine toilets, with the addition of the new 14" toilet. Designed for the discerning owner looking for luxury and comfort, the Deluxe Flush Range features space saving stylish design with minimal water usage and virtually silent operation.         Specials    Closeouts   Remanufactured    Rebates

Cal Msub SS Mounting Bracket Cal Pump SS Mounting Bracket for MS225 and MS320 Pumps. Stainless steel construction All metal

Cal Pump MSUBM Nylon Bracket Fits All But 225 320 Nylon Mounting Brackets for 580, 900 and 1200 Pumps. Includes One Pair of Brackets.

Tuthill 1LEV-C-7 Pump 3.2 Gpm Cast Iron Rotary Gear Pump Pump End Only Tuthill L Series Pump Cast Iron Construction Has Internal Relief Valve Relief valve is set at 55 PSI (can be adjusted in field). Clockwise rotation only (from shaft end view) Inlet Port is 1/2 inch NPT Discharge Port is 1/2 inch NPT Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 3.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Groco Bp-20-S-Base Casting Pump Base  

Ampco Ac216Md14T-S, Viton Pump End Only with Max Impeller

Tuthill 00LE-C-7 Pump 1Gpm 1 1/2" Ports Pump Body: Cast Iron Shaft Seal: Mechanical Seal Viton Port Size:Inlet Port is 1/2 inch NPT, Discharge Port is 1/2 inch NPT. Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 1.0 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Tuthill 000LEV-C-7 Pump 0.5Gpm 3/8 Ports Pump Body: Cast Iron  Relief Valve: Relief valve is factory set to 55 PSI with adjustment between 55-120 PSI Shaft Seal: Mechanical Seal Viton Port Size: Inlet Port is 3/8 inch NPT, Discharge Port is 3/8 inch NPT Product Specs : Positive Displacement, Internal Rotary Gear Design Open Flow at 1800 RPM : 0.5 GPM at 1800 RPM Standard Discharge Pressure: up to 500 PSI Inlet Pressure: up to 280 PSI Maximum Differential Pressure: 300 PSI Temperature: up to 375 F Typical Viscosity Range: 40 to 1000 SSU

Cal MS-580-20-2B Pump 580Gph 230V 50/60 Cal Pump Centrifugal Pump, Stainless and Bronze Body, 580GPH No Flow Control, 230V 50/60Hz with 20 Foot Power Cord, 3/4" Male NPT Inlet and 1/2" Male NPT Outlet, Viton Seal, Can Run in Open Air or Submersed, For Fresh or Salt Water up to 110F, Can Be Used With Marine AC Units up to 24,000BTU, Approved for: UL, CE, ABYC and USCG. Includes 2 Nylon Mounting Brackets