435 Black Streak Remover - Pint (16oz) On deck all in one, easy-to-use No. 435 Black Streak Remover + Protector safely and effectively eliminates black streaks, tough stains, and freshwater spots from fiberglass surfaces. Quickly restores finish while leaving behind fast-bonding polymer surface protection. Safe for use on fiberglass, metal, and painted surfaces. Applications: Removes black streaks Removes tough stains Removes fresh water spots Provides protection as it cleans Designed for fiberglass, metal, and painted surfaces Tip: Always test the product first in a small, inconspicuous area to ensure the desired result.

Black Streak Remover - 32oz 303® Black Streak Remover will keep the siding of your RV looking like new by removing unsightly black streaks with ease. These black streaks occur naturally when dirt and rubber material from an RV’s roof come off after miles of traveling at high speeds. The powerful formula in 303® Black Streak Remover pulls this material and dirt from the surface and allows it to be wiped away, leaving a clean, streak-free finish. Features: Removes hard-to-clean black streaks and dirt Leaves a clean, streak-free finish Biodegradable and marine safe Great for use on RVs, Campers, Pop-Ups, Motorhomes, and Boats Safe on fiberglass, vinyl, metal, and painted surfaces Directions: Shake well before use. Use only on dry surfaces. Spray the product directly on the black streaks. Allow the product to remain on the surface for 2-3 minutes. Gently scrub and then wipe off with a wet towel, microfiber, or sponge. For stubborn stains, repeat as needed.

Eco Spray All & Black Steak Remover - 32oz Spray Eco Spray All and Black Streak Remover is a highly effective all purpose cleaner that is safer for use and safer for the environment.  It whisks away Black Streaks, grime, stains, oxidation, rust and oil.

920 Fiberglass Marine Cleaner - 16oz The ideal pre-wax item, No.920 cuts fast and finishes the smooth-removing film, mild-moderate UV oxidation/chalkiness, discoloration, and tough stains from fiberglass. Easy-to-use compound restores original color and gloss to facilitate the easy application of Collinite’s last-step waxes; improving wax bond, spread/coverage, and durability.  Features: Removes mild-moderate oxidation Removes black streaks Removes tough stains a wash will not Leaves a clean and smooth surface for follow-up wax Applications: For hand, dual action and rotary use Average spread/coverage: 250-500 sq. ft. Application By Hand: Place a nickel-sized amount of product on an applicator pad Rub in well over a section no bigger than a 2×2 ft. Use firm pressure and rub until just before the product starts to dry. Buff off with a microfiber towel to reveal a crisper, darker, and more reflective finish Application by machine: Place 5 small pea size dots onto the buffing pad. Do not over-saturate the pad. Only a small amount of product is needed Place pad on panel and turn on buffer to 5800 opm (orbits per minute). Make 2-3 section passes with firm pressure no larger than a 2×2 ft section. Lower machine speed to 4800 opm and make an additional 2-3 passes with less pressure. Buff until just before product dries and never dry buff Wipe off product residue from panel to reveal a clean, glossy, and beautiful finish *Sold as an individual

920 Fiberglass Marine Cleaner - 64oz The ideal pre-wax item, No.920 cuts fast and finishes the smooth-removing film, mild-moderate UV oxidation/chalkiness, discoloration, and tough stains from fiberglass. Easy-to-use compound restores original color and gloss to facilitate the easy application of Collinite’s last-step waxes; improving wax bond, spread/coverage, and durability.  Features: Removes mild-moderate oxidation Removes black streaks Removes tough stains a wash will not Leaves a clean and smooth surface for follow-up wax Applications: For hand, dual action and rotary use Average spread/coverage: 250-500 sq. ft. (for the 16oz version)  Application By Hand: Place a nickel-sized amount of product on an applicator pad Rub in well over a section no bigger than a 2×2 ft. Use firm pressure and rub until just before the product starts to dry. Buff off with a microfiber towel to reveal a crisper, darker, and more reflective finish Application by machine: Place 5 small pea size dots onto the buffing pad. Do not over-saturate the pad. Only a small amount of product is needed Place pad on panel and turn on buffer to 5800 opm (orbits per minute). Make 2-3 section passes with firm pressure no larger than a 2×2 ft section. Lower machine speed to 4800 opm and make an additional 2-3 passes with less pressure. Buff until just before product dries and never dry buff Wipe off product residue from panel to reveal a clean, glossy, and beautiful finish *Sold as an individual

Fiberglass Stain Lifter - Pint (16oz) Non abrasive, stain lifting gel, ideal for fiberglass. Chemically lifts waterline, rust, growth and tough exhaust stains. Especially well suited for new boats.

C-Cleat Cam Cleat - Small - Black w/Black Base 2-8mm(3/32" - 5/16") Rope Diameter Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive. Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications: Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating Materials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring

C-Cleat Cam Cleat - Medium - Black w/Black Base 3-12mm(1/8" - 1/2") Rope Diameter Intensive development efforts have produced this range of cleats that provide unbeatable holding power, yet are designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, light and corrosion free. The unique tooth profile and cam geometry are designed to grip without damaging the rope. A multi-coil spring recessed in the upper part of the cam generates near constant torque. This constant torque ensures secure cleating of even the smallest lines with minimal abrasion or rope wear and low line entry and exit efforts. The lightweight ultra rigid carbon fiber composite cams of the c-cleat are corrosion free, suffer virtually no tooth wear and are non rope abrasive. Features: Design, materials selection and advanced manufacturing methods combine to deliver superior strength and holding power, light weight and corrosion resistance Cam profile and multi-coil spring minimise line entry and release effort Carbon fiber compoasite cam material provides maximum resistance to heat and abrasion Unique self-cleaning, self-lubricating slotted bearings ensure consistent high performance even when subjected to high static loads Applications: Range of cleats for all requirements including control lines, jib sheet and mainsheet cleating Materials: Carbon fiber composite cams Long strand glass fiber reinforced polymer base PTFE impregnated Acetal slotted bearing Stainless steel multi-coil spring

415 Color-Up Auto Cleaner - 16oz Removes film, mild oxidation/discoloration, brake dust, oil, grease, tar, bugs, stains, and more from clear coat/single stage paint, painted/non-painted metal & fiberglass. Also, brightens surface clarity and deepens shine while preparing the finish for follow-up a wax-improving bond, spread, and protective durability.  Features:  Contains no waxes or silicones Can act as a wax remover Economical, light-duty paint-cleansing compound  Applications: Not for glass, rubber, or trim  For both hand & dual-action polisher use Clear coat safe, for use on all colors *Sold as an individual

390 Pre-Wax Auto Polish - 16oz All new clear-coat safe, machine polish uses micro abrasives to safely eliminate minor paint defects like fine scratches/swirls, water spots, mild oxidation, and wash marks from the surface; finishing down to impart a smooth, high gloss shine and facilitating the easy application and improving the bond-of any of Collinite’s last step durable wax coatings; 845, 476 or 915. Features: Imparts a smooth, high gloss shine Facilitates the easy application and improves the bond of any of Collinite’s durable wax coatings Perfects finish for follow-up wax protection Handcrafted and poured in the USA Applications: Not for use on rubber or black trim Clear coat safe, machine-friendly Best results found by dual action polisher *Sold as an individual

925 Fiberglass Marine Wax - 16oz For those in search of glistening fiberglass and lasting protection without the elbow grease of paste wax. Easy on, easy off last step wax provides both long-lasting protection to fiberglass while leaving behind a high gloss shine and durable protective coating that shields all season against weathering; UV, salt spray, and more. Ideal for wax-ready large surface area jobs where radiant shine, protective longevity, and timely job completion are all paramount. Features: Provides long-lasting weather protection Most machine-friendly last-step marine wax Clear coat safe Can be layered Wax coating is more durable than Collinite 870 but less durable than Collinite 885 Provides easier removal, but less buffing than 885 paste wax 925’s user-friendly formula is an excellent alternative for a shorter boating season, and it also suitable to be layered over the 885 Fleetwax Applications: For hand or machine use For use on contaminant-free gel coat, fiberglass For exterior marine detailing use Average Spread/Coverage: 1,200-2,000 sq. ft. *Sold as an individual

Screw-Out Deck Plate The Beckson Screw-Out Plate was designed to provide access without the use of tools, with a single start non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A back-up sealing wall leaves the plate watertight, even if the gasket is removed. Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the center. Deck plates are used for access to shut-off valves or back-fastenings, inspection, and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure due to temperature or oil canning can occur. Center: Clear Color: Black

Jabsco 54351-0000 O'Ring Conv Kit For Lh34  

Jabsco 54352-0000 O'Ring Housing Lh3  

Jabsco 54353-0000 Sleeve O'Ring