Classic LED Lantern - 500 Lumens - Red  Light the campsite through the night with the Coleman Classic 500 Lumens LED Lantern.  With high-performing LEDs, an impact-resistant design, and an upgraded bail handle for easy carrying and hanging, this lantern is ideal for any adventure.  Its modern, metal-inspired texture comes from our original fuel-burning lanterns, and its overall features have been updated for easy use.  It also pulls double-duty: set it on the table for a late-night card game, or hang it in your tent as an overhead light. Features: Battery operated Easy to carry - large bail handle with built-in carabiner for hanging  Impact resistant with durable plastic design Technical Specifications: Battery - 4 D Batteries (sold separately)  Lumens - (high) 500 lumens, (medium) 250 lumens and (low) 100 lumens  Runtime - (high) 20 hours, (medium) 50 hours, (low) 200 hours and (flashing) 200 hours Beam Distance  - (high) 13 meters, (medium) 9 meters and (low)  Waterproof Rating - IPX4 Dimensions (Width x Height) - 11.5" x 6" *Sold as an Individual

Classic LED Lantern - 300 Lumens - Red  Light the campsite through the night with the Coleman Classic 300 Lumens LED Lantern.  With high-performing LEDs, an impact-resistant design, and an upgraded bail handle for easy carrying and hanging, this lantern is ideal for any adventure.  Its modern, metal-inspired texture comes from our original fuel-burning lanterns, and its overall features have been updated for easy use.  It also pulls double-duty: set it on the table for a late-night card game, or hang it in your tent as an overhead light. Features: Battery operated Easy to carry - large bail handle with built-in carabiner for hanging  Impact resistant with durable plastic design Technical Specifications: Battery - 4 AA Batteries (sold separately)  Lumens - (high) 300 lumens and (low) 50 lumens  Runtime - (high) 4.5 hours and (low) 35 hours  Beam Distance  - (high) 10 meters and (low) 4 meters Waterproof Rating - IPX4 Dimensions (Width x Height) - 6" x 4.6" *Sold as an Individual

Mini LED Lantern with BatteryGuard™ - 200 Lumens - Black  The Coleman 200 Lumens Mini LED Lantern with BatteryGuard™ stops battery drain, so you’ll have power when you need it most.  Switching off the lantern automatically disengages batteries from the circuit to extend battery life by up to 25%. No matter the situation, from power outages to evenings by the lake, your lantern will be ready for anything, even when you’re not.  Features: BatteryGuard™ technology automatically disconnects batteries from the circuit when turned off to stop battery drain Up to 25% longer battery life than traditional lanterns Reduces corrosion so batteries can be stored in the lantern for years (up to their inherent shelf life) Impact resistant with durable plastic design   Lifetime LEDs never need replacing Technical Specifications: Battery - 4 AA Batteries (sold separately)  Lumens - Up to 200 lumens Runtime - Up to 15 hours Beam Distance  - Up to 7 meters Waterproof Rating - IPX4 Dimensions (Width x Height) - 5.25" x 3" *Sold as an Individual

NorthStar® Propane Lantern - 1500 Lumens - Green  After the sun sets, illuminate your night under the stars with the NorthStar® 1500 Lumens 1-Mantle Propane Lantern.  The PerfectFlow™ pressure regulator helps the lantern perform consistently even in extreme conditions so you can light the night in all types of weather.  Light your lantern by hitting the Instastart™ push-button ignition—no need to pack matches. A porcelain-coated 2-tier ventilator helps resist corrosion and rust and the glass globe can tolerate high temperatures to prevent cracking while a metal guard adds protection from impacts.  When you're ready to head home, the feet on the base collapse for compact storage until your next outdoor adventure. Features:  Folding design for compact storage and transportation PerfectFlow™ pressure regulator for consistent performance, even in extreme conditions Instastart™ push-button ignition for matchless lighting Porcelain-coated 2-tier ventilator helps resist corrosion and rust The glass globe has high-temperature tolerance to prevent cracking from heat Metal globe guard for added protection from impacts Collapsible footed base for increased stability and compact storage Insta-Clip® #95 mantle included Technical Specifications: Fuel - 16.4 oz. propane cylinder (sold separately) Lumens - 1,500 lumens  Runtime - (high) 4 hours and (low) 9 hours  Beam Distance  - Up to 26 meters Dimensions (Width x Height) - 6.1" x 12.05" *Sold as an Individual

Torrent LED - Neon Yellow Power meets versatility in the Torrent LED.  It’s small enough to be a backup light, but with a 500 Lumen Maxbright LED, Torrent is more than powerful enough to be a main source.  Dive lights are not just for night diving, and the Torrent LED is our favorite dive light for looking into caves/crevices, restoring lost colors at depth, and daytime wreck diving.  For those who need a great backup, an efficient main source, or just all around great dive light, the Torrent LED is all of the above.  Features: Powerful Single Maxbright LED Locking Switch Specifications: Power - 500 Lumens Lamp - 1 Maxbright LED  Burn Time - 1.5 Hours Batteries - 8 AA Alkaline (Included) Weight - 12.8 oz or 365 g Water Resistant - IPX8 Modes - Spot High Warranty - Lifetime *Sold as an Individual WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Torrent LED - Black Power meets versatility in the Torrent LED.  It’s small enough to be a backup light, but with a 500 Lumen Maxbright LED, Torrent is more than powerful enough to be a main source.  Dive lights are not just for night diving, and the Torrent LED is our favorite dive light for looking into caves/crevices, restoring lost colors at depth, and daytime wreck diving.  For those who need a great backup, an efficient main source, or just all around great dive light, the Torrent LED is all of the above.  Features: Powerful Single Maxbright LED Locking Switch Specifications: Power - 500 Lumens Lamp - 1 Maxbright LED  Burn Time - 1.5 Hours Batteries - 8 AA Alkaline (Included) Weight - 12.8 oz or 365 g Water Resistant - IPX8 Modes - Spot High Warranty - Lifetime *Sold as an Individual WARNING: This product can expose you to chemicals including BISPHENOL A (BPA) which is known to the State of California to cause birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Quad® Pro 800L LED Panel Lantern Get the convenience of multiple lights in one when you have the Coleman® Quad® Pro 800L LED Lantern. When you need to take some light with you without taking the whole lantern, simply pop one of the take-along light panels off the base to use as a personal light. Each panel also has a built-in flashlight providing the options of directional or area lighting whenever you leave the main area. The magnetic attachment system on each panel lets you stick them to toolboxes, car hoods, the steel frame of your shelter, or other metal surfaces for hands-free light. Or, you can flip out the fold down panel handle and use it as a stand to prop the panel up on a table. When you return the panels back to the base, the batteries will automatically recharge. If every panel needs to be removed, a light on the base will stay lit to help you find your way back to the main campsite. Plus, with the mobile charging output, you can keep your phone and other mobile devices charged if you're not around a power source or if the power is out. When everything is together the lantern shines up to 800 lumens on high for up to 20 hours or 100 lumens on low for up to 400 hours, so you can enjoy good times with your friends and family long into the night. Features: 4 take-along light panels recharge on base Perfect for when you need light in more than one place Built-in flashlight on each panel provides directional light when you need it Fold-down panel handles double as stands Magnetic panels provide hands-free light when attached to toolboxes, car hoods, steel-framed shelters and more USB charging port to charge your mobile devices Base light stays lit when panels are removed Fold-down lantern handle for easy carrying in a space-saving design Individual controls on base and each panel 3 modes (lantern): high, medium, low 3 modes (panel): high, low, flashlight Lumens (lantern): 800 (high), 200 (medium), 100 (low) Lumens (panel): 100 (high), 25 (low), 100 (flashlight) Runtime (lantern 8D): 20 hours (high), 120 hours (medium), 400 hours (low) Runtime (lantern 4D): 13 hours (high), 70 hours (medium), 200 hours (low) Runtime (panel): 3 hours (high), 14 hours (low), 3 hours (flashlight) Beam distance (lantern): 18 m (high), 11 m (medium), 7 m (low) Beam distance (panel): 13 m (high), 6 m (low), 40 m (flashlight) IPX4 water-resistant design Base powered by 4 or 8 D batteries to conserve battery usage or maximize performance (sold separately) Each panel powered by 3 AAA NiMH batteries (included) Lifetime LEDs never need replacing 3-year limited warranty

Classic Recharge LED Lantern - 800 Lumens - Black  Keep your campsite lit through the night with the Coleman Classic Recharge 800 Lumens LED Lantern.   With a rechargeable lithium-ion battery and a durable material, this lantern is built for adventure.  Its modern, impact-resistant design is inspired by our original fuel-burning lanterns, and its updated bail handle makes it easy to carry and hang.  Place it on the table for a late-night card game, or hang it by its handle in your tent for an overhead light.  Features: Rechargeable battery State of the art battery includes battery level indicators and includes a USB to USB-C cord that nests in the lantern base  Integrated charging station - charge personal devices even when the lantern is in use  Easy to carry - large bail handle with built-in carabiner for hanging  Impact resistant with durable plastic design Technical Specifications: Battery - Rechargeable - 4800 mAh built-in lithium-ion Lumens - (high) 800 lumens, (medium) 300 lumens and (low) 100 lumens  Runtime - (high) 5 hours, (medium) 15 hours, (low) 45 hours and (flashing) 45 hours Beam Distance  - (high) 18 meters, (medium) 11 meters and (low) 7 meters Waterproof Rating - IPX4 Dimensions (Width x Height) - 13" x 6" *Sold as an Individual

LED Lantern with BatteryGuard™ - 1,000 Lumens - Black  The Coleman® 1,000 Lumens LED Lantern with BatteryGuard™ stops battery drain, so you’ll have power when you need it most.  Switching off the lantern automatically disengages batteries from the circuit to extend battery life by up to 25%. No matter the situation, from power outages to evenings by the lake, your lantern will be ready for anything, even when you’re not.  Features: BatteryGuard™ technology automatically disconnects batteries from the circuit when turned off to stop battery drain Up to 25% longer battery life than traditional lanterns Reduces corrosion so batteries can be stored in the lantern for years (up to their inherent shelf life) Impact resistant with durable plastic design   Lifetime LEDs never need replacing Technical Specifications: Battery - 4 D Batteries (sold separately)  Lumens - Up to 1,000 lumens Runtime -(high) Up to 14 hours Beam Distance  - Up to 16 meters Waterproof Rating - IPX4 Dimensions (Width x Height) - 8" x 4.375" *Sold as an Individual

600 Lumens LED Lantern with BatteryGuard™ - Green The Coleman 600 Lumens LED Lantern with BatteryGuard stops battery drain so you'll have power when you need it most. Traditional battery-operated lanterns experience residual power drain as long as batteries are connected to the circuit, even when the device is turned off. With BatteryGuard, the batteries are automatically disengaged from the course when the lantern is switched off to extend their life by as much as 25%. This technology also reduces the chance of damaging corrosion so batteries can be stored in the device for years (up to their inherent shelf life). Additional features include a single button to turn the lantern on and off, up to 30 hours runtime on high using 3D batteries (sold separately), water resistance, impact resistance up to 2 meters (on dirt), and lifetime LED bulbs that never need replacing. Whether from power outages to roadside emergencies, this BatteryGuard lantern with a 12-meter beam gives you Power When You Need It. Features: BatteryGuard technology stops battery drain to preserve battery life and reduce corrosion Allows batteries to be stored in the lantern for years (up to their inherent shelf life) 2 modes: high, and low; lasts up to 30 hours on high and uses 3D batteries (sold separately) Brightness: up to 600 lumens; beam distance: up to 12 meters IPX4 water-resistant design; impact-resistant up to 2 meters (on dirt) Lifetime LEDs never need replacing; 3-year limited warranty Specifications: Color: Green Weight (lbs): 1.220 Max Run Time (hours): 30 Lighting Water Rating: IPX4 Battery Type: Alkaline Fuel Type: Battery

X-Series X16 - Colors LEDs The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends. The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose either a single color version from either Midnight Blue or Ultra White or pick our Colors option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 5,800 Lumens / 4,500 Fixture Lumens: Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd. 60° Beam Angle A wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to Clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours of scrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Mounting Recommendations Boat size: up to 65' (20M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 150 Metal Halide Fixture Lumens* (total light output from a finished fixture): 4,500 Lumens: 5,800 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC Approx. light penetration (avg. water quality): 40' (12M) Approx. Light penetration (perfect water quality): 100' (30M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 9.84" (250mm) x 4.29" (109mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.50kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 16 Certification: EMC Approved CE Approved: Yes Specifications: Warranty: 2 years

X-Series X16 - Midnight Blue LEDs The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends. The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 5,800 Lumens / 4,500 Fixture Lumens: Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd. 60° Beam Angle A wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to Clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Mounting Recommendations Boat size: up to 65' (20M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 150 Metal Halide Fixture Lumens* (total light output from a finished fixture): 4,500 Lumens: 5,800 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC Approx. light penetration (avg. water quality): 40' (12M) Approx. Light penetration (perfect water quality): 100' (30M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 9.84" (250mm) x 4.29" (109mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.50kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 16 Certification: EMC Approved CE Approved: Yes Specifications: Warranty: 2 years

X-Series X16 - White LEDs The OceanLED X-Series X16 combines brightness with affordability. Whether cruising or fishing, the X16 gives stunning performance allowing you to enjoy more time on the water with family and friends. The X16 packs a mighty 5,800 Fixture Lumens into its low profile design and utilizes focused optics to produce a 60° circular beam from each LED providing great water penetration, illuminating a large area. Choose either a single color version from either Midnight Blue or Ultra White or pick our Colours option where you can select any color you want from the RGBW spectrum. You can toggle between the colors or with our DMX controller and smartphone app, your choice is virtually limitless. Looking to catch more fish? Switch on the Fish-Strobe mode and the light emits a random strobe pattern that is proven to attract extra bait fish and help catch more fish. The low profile, simple design is easy to install even for the weekend DIYer. A small 12.5mm hole is all that's needed to run the cable through the hull. Fix 4 screws and that's the hard work done! Simply attach to 12V and you are ready to light up your world. Maintenance is virtually zero. Simply wipe the lens with a cloth to remove any marine growth thanks to the special Tritonium coating. Features: 5,800 Lumens / 4,500 Fixture Lumens: Outstanding performance from this small, bright light makes it the obvious choice for those who want tostand out from the crowd. 60° Beam Angle A wide-angled, focused beam lights up a large area of the water. Compact and simple design Made from a chemically resistant optical polymer with a built in driver, there is a lot packed into this compact light. Installation needs only a small, 12.5mm hole in the hull to feed the cable through and 3 screws in place. No bonding required. Easy to Clean Thanks to its Tritonium coating, a simple wipe of the lens removes any underwater growth saving hours ofscrubbing each time you use it. Fish-Strobe Mode Exceptionally bright, randomized strobing of the light is proven to attract more fish and catch more bait. Mounting Recommendations Boat size: up to 65' (20M) Transom / Hull spacing: 2-4' (0.5-1.2M) Transom quantity: 2-6 Hull quantity: 4-8" (10-20cm) Maximum hull thickness: N/A Installation depth (to top of fixture): 300mm below water line In water fitting: No Technical Light output equivalent to: 150 Metal Halide Fixture Lumens* (total light output from a finished fixture): 4,500 Lumens: 5,800 Beam angle: 60° circular Typical LED life expectancy: 40,000 hours Minimum-Maximum operating voltage DC: 9 - 32 V DC Minimum-Maximum operating voltage AC (AC/optional) Current / Amp draw (DC): 3.2A @ 12V DC - 1.5A @ 24V DC Approx. light penetration (avg. water quality): 40' (12M) Approx. Light penetration (perfect water quality): 100' (30M) Driver type: Internal Driver size (L x W x H): N/A Color options: Ultra White - Midnight Blue or Colors Correlated Color Temp: 6500 K - 450 nm IP Rating: IP68 Fish strobe: YES Anti fouling properties: Tritonium coated lens LED Manufacturer: CREE Physical Size: 9.84" (250mm) x 4.29" (109mm) Depth: 0.86" (22mm) Total weight including electrical driver: 0.50kg Extension cable length (standard-hard wired to light): 9-7/64' (3M) Hole cut-out for cable entry: 1/2" (12.5mm) Material: Chemically Resistant Optical Polymer Lens material: Pilkington Optiwhite Body construction: Machined (First Release) Bezel material: Plastic Bezel thickness: N/A Bezel options: Stainless Steel Bezel Optional Bezel color: White Drag factor: N/A Optics: Collimator No of LEDs: 16 Certification: EMC Approved CE Approved: Yes Specifications: Warranty: 2 years 

Surface Strip Light w/Switch - White/Red LEDs - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE

Surface Strip Light w/Switch - Warm White/Red LEDs - 12V The Surface Mount Strip lamps from Hella marine feature an innovative waterproof switch for reliable operation. Completely sealed, UV and corrosion resistant and an ultra-low profile these install lamps are easy to install and ideal for interior or exterior applications. Offering exceptional light output and an ultra-low power consumption of <3W, these lamps are an ideal replacement for bulky fluorescent lighting. Producing 250 lumens (White) and offering a leading CRI rating of 85 these LEDs will enhance the appearance of your vessel and provide bright and accurate illumination. The sealed switch system prevents moisture and other contaminants from effecting electronics, while the low profile design offers an effortless surface mount installation almost anywhere on board. Fastenings at each end of the lamp body are covered by snap-on end caps for a clean and modern appearance. Purpose designed for the harsh marine environment, surface mount strip lamps are salt water durable and thoroughly tested to withstand high levels of vibration, impact, and shock loads. The housings are precision manufactured from advanced UV resistant acrylic and are completely sealed, therefore ideal for interior and exterior, wet or dry applications. These lamps are an excellent for chart lamps, above bench tops, bulk head lamps and around bait boards to name only a few applications. Hella marine surface mount LED strip lamps offer class leading energy efficiency and unmatched durability and are supported with a 5 year warranty for a total ‘fit and forget’ solution and complete peace of mind. Specifications: Lens Material: UV resistant enhanced impact acrylic Color Temperature: 5000K (White) 2700K (Warm White) Power Consumption: < 3.0W ( < 0.25A @ 12V / < 0.16A @ 24V ) Operating Voltage: 12V DC or 24V DC Dimming: Hella marine Dimmer 5XA 998 572-001 Cable: Pre-wired with 500mm of twin core cable Degree of Protection: Completely Sealed IP 67 Installation: Surface Mount Weight: 75g (including cable) Approvals: CE