Boat Cover Adjustable Support Pole with Boat Vent II Replace a conventional support pole with one that provides an air vent to reduce moisture, heat and mildew under the cover. Includes an adjustable (22″ to 70″) anodized aluminum pole, boat vent and simple installation instructions. These lightweight telescoping poles are designed to support your cover so that water does not pool.

Boat Cover Adjustable Support Pole with Snap & Vinyl End Prevent dry rot and mildew. Available in two styles. Each style is constructed of anodized aluminum tubing that can be adjusted to desired height from 22″ to 70″. Packaged 1 per box. These lightweight telescoping poles are designed to support your cover so that water does not pool.

4' T-Shade T-Top Shade Extension - White Add valuable shade and rain protection to your T-Top and extend your day on the water. Our T-Shade™ mounts easily to the T-Top with adjustable straps. Suction cups are also provided to easily mount the T-Shade™ to Hard Tops. The T-Shade™ is supported by two fully adjustable 7/8″ anodized aluminum poles that mount in the aft rod holders. Stretchable WeatherMax®3D canvas creates a secure, customized fit and is available in three sizes to accommodate the desired amount of coverage. To determine size, measure from aft of the T-Top frame to aft of the seat(seats) you wish to cover. T-Shade™ T-Top Shade Extensions Features: Shade Extension Fabric with quick release buckles, straps & stainless steel snap hooks. Aluminum Adjustable Support Poles w/ High Grade Black Nylon Fittings Anti-scratch foam pole grips, mounting straps and storage bag. Four suction cups (for use with hard tops) Sizes – Available in 4′, 5′ and 6′ lengths when fully extended. Stretch to 5 feet wide. Simple to install and store when not in use. 5 year limited warranty. * Note: Do not exceed 35 mph when in use.

Boat Cover Snap Patch Use this adhesive snap patch on the underside of a boat cover to reinforce and provide a location to attach a snap-in style support pole.

Pontoon Boat Cover Support System Extend the life of your pontoon boat cover by preventing water from pocketing. This easily installed system includes two adjustable support poles (bright dip anodized-snap ends). Poles adjust from 27" to 50" maximum height. 60ft of 1" polypropylene webbing, quick release adjuster buckles and four injection molded hooks to secure to decking. 

Boat Cover Rope Ratchet The rope ratchet allows you to tighten your cover to proper tension then releases with a convenient thumb lever. Accommodates 1/4″ rope which is standard of all Carver Custom Covers and many Specialty Boat Covers.

Aluminum Support Pole with Snap-On End 24" to 45-1/2" Features: Telescoping boat cover pole with cam-lock design Helps prevent water stains and damage to boat Available in two telescoping ranges: 24 to 45-1/2 inches and 30 to 57-1/2 inches Finish: Satin Anodized Telescoping Range: 24 to 45-1/2 inches 5-year limited warranty

Boat Cover Tie Down Kit Constructed of heavy-duty 1″ black polypropylene webbing and convenient quick-release buckles. Unlike bungee cords, these durable tie-downs don’t stretch, so they won’t tear your cover or damage your boat. Each kit contains twelve 8-foot straps.

As the Fall months creep into our calendars, boat owners in cooler climates acknowledge, with sadness, that it’s time to put the boat away. Outside Storage? It’s a thought and an option but consider that you may be threatened by snow build up, tornadoes or hurricanes. The success of storing your boat outside depends on how well your boat is protected from the conditions outdoors.                          Rinse/Flush Rinsing the outside of your boat and trailer thoroughly with fresh water will remove excess salt. Pay particular attention to your trailer’s leaf springs, wheel hubs and brakes that are constantly submerged during launching and retrieval of your boat. Flush your engine's cooling system with fresh water in line with your engine manufacturer’s salt removal recommendations. This will minimize corrosion and overheating issues come spring. Drain your boat of all water – bilge, head, sink lines, water tanks, sea-cocks, and pipes. If you are in an area with extended periods of freezing, put antifreeze in the low parts if there is still some water present. Salt Watch out for salt. Buy a good salt remover to minimize corrosion. Add fuel stabilizer to top off your fuel tanks. Here is one recommended by CLR Marine. Diesel Formula Fuel Stabilizer & Performance Improver - 32oz *Case of 4* STA-BIL Diesel Formula Fuel Stabilizer is a diesel additive that keeps fuel fresh for quick, easy starts and maximized for engine performance. Designed for use with all diesel engines, and all diesel fuels, Sta-Bil Fuel Stabilizer Diesel formula prevents sludge and sediment formation, cleans and lubricates fuel injectors to improve performance and helps remove water. It is safe to use and recommended for use at every fill up, with the 32 ounce bottle treating up to 320 gallons of fuel. Batteries Remove the batteries from your boat and store in your garage or basement. Batteries should be connected to a battery charger that will give them a good charge and one that w automatically switches to a float/trickle charge to keep your batteries topped up. Match your charger to the type of battery you are charging. Using a charger manufactured for lead acid batteries to charge an AGM (absorbent glass mat) battery will cause damage to the battery. If you choose to keep your batteries in the boat, connect a solar trickle charger. These chargers will keep your batteries topped off without the hassle of removing heavy batteries from your boat. Cleaning Clean the exterior with the proper fiber glass or wood cleaner needed for your boat. Bright work can be cleaned by removing the wood or cleaning it as it is - installed. Be careful to not get the wood cleaner onto the deck surfaces. The exterior should be dried with a chamois cloth. Vinyl seat cushions and backs should be cleaned with vinyl cleaner. Hard surfaces inside the vessel can be wiped with all purpose cleaners. End your cleaning with a coat of wax to the exterior and polish. Don’t forget the bottom paint. Before you store, spend the time to give your boat a thorough cleaning. CLR Marine has many products by trusted brands such as Powerhouse, Davis Instruments, Jabsco, Shurhold, and Swobbit, to help winterize and clean. You will be grateful in the spring during launch time that your boat is already clean as the new boating season begins. Cover Up If you store outside in your yard, driveway, or a boat yard, a boat cover is a must to prevent damage from winter conditions. Leaving your boat in the water is not recommended. The boat is exposed to rough weather, and has a greater possibility of sinking if you aren’t monitoring it often. https://www.clrmarine.com/462m4/boat-outfitting/winter-covers.html and https://www.clrmarine.com/462m4/winterizing.html Circle May 21, 2022, on your calendar. The date is almost ten days before Memorial Day, next year when most harbors open for the season. Start your prep work, tune-ups, sanding, and painting to get out on the water and a great boating season. In the meantime, during the cold winter months, cozy up to the fire and read your boating manuals, new safety regulations and weather information. Fair winds and smooth sailing.   To obtain more information about the products and services mentioned in this article, please get in touch with CLR Marine https://www.clrmarine.com/. _________________________________________________________________________ Award-winning author Cheryl Kuba has been at the helm for more than 30 years sailing the Great Lakes, with side trips to the British Virgin Islands and St. Maarten. She has served as past- Commodore of Great Lakes Fleet 21 -Chicago region. 3happycampers.com ©Copyright Cheryl Kuba, 3happycampers.com, 2021.  

    Boat Covers   Carver boat covers are available in several categories to give the boat owner a balance between perfect fit and perfect price. Each boat cover category is available in a selection of carefully engineered fabrics to provide you with choices that are right for you and best for your boat.     Carver Quality in Personal Watercraft Covers   High Performance protection in Custom Fit and Styled-to-Fit covers in a wide variety of patterns for the serious Personal Watercraft/Jet Ski owner! Carver takes pride in what they build so you can have the highest level of confidence when choosing a cover to protect your investment for years to come!     Kayak/Canoe Covers   Carver's Styled-To-Fit and Specialty Kayak and Canoe Covers will keep your units clean and protected. Available in high-quality materials.     Specials    Closeouts    Remanufactured    Rebates

    Boat Covers Carver boat covers are available in several categories to give the boat owner a balance between perfect fit and perfect price. Each boat cover category is available in a selection of carefully engineered fabrics to provide you with choices that are right for you and best for your boat.     Carver Quality in Personal Watercraft Covers High Performance protection in Custom Fit and Styled-to-Fit covers in a wide variety of patterns for the serious Personal Watercraft/Jet Ski owner! Carver takes pride in what they build so you can have the highest level of confidence when choosing a cover to protect your investment for years to come!     Kayak/Canoe Covers Carver's Styled-To-Fit and Specialty Kayak and Canoe Covers will keep your units clean and protected. Available in high-quality materials.   Specials    Closeouts    Remanufactured    Rebates  

Carver Boat Vent II Protect your investment with this fast and easy-to-install Boat Vent II. The Boat Vent II can be added to any custom or styled-to-fit boat cover. Made with UV inhibited polymers to withstand the elements. Prolongs the life of the boat’s upholstery by venting the enclosed space of the warm, moist air. Boat Vent II helps prevents mold, mildew, and bacteria from growing under the boat cover and causing irreversible damage to the boat’s interior. Can be used alone or with most standard ¾” support poles.

Straps Support System with Support Pole Eliminates virtually all possible areas that could collect water and allow it to pool, causing damage to the cover. This system is designed for simplicity with two pre-installed, adjustable 20-foot straps that snap quickly to the rear tow hooks and one 40-foot adjustable strap to cradle the bow.  System fits up to 28-foot boats.  For pontoon boats, two systems are required and can easily be joined to create a perfect “frame” for the pontoon cover.  Each system comes with one adjustable (40″ to 70″) support pole, system center, strap set and simple installation instructions.

5' T-Shade T-Top Shade Extension - White Add valuable shade and rain protection to your T-Top and extend your day on the water. Our T-Shade™ mounts easily to the T-Top with adjustable straps. Suction cups are also provided to easily mount the T-Shade™ to Hard Tops. The T-Shade™ is supported by two fully adjustable 7/8″ anodized aluminum poles that mount in the aft rod holders. Stretchable WeatherMax®3D canvas creates a secure, customized fit and is available in three sizes to accommodate the desired amount of coverage. To determine size, measure from aft of the T-Top frame to aft of the seat(seats) you wish to cover. T-Shade™ T-Top Shade Extensions Feature: Shade Extension Fabric with quick release buckles, straps & stainless steel snap hooks. Aluminum Adjustable Support Poles with High Grade Black Nylon Fittings Anti-scratch foam pole grips, mounting straps and storage bag. Four suction cups (for use with hard tops) Sizes – Available in 4′, 5′ and 6′ lengths when fully extended. Stretch to 5 feet wide. Simple to install and store when not in use. 5 year limited warranty. * Note: Do not exceed 35 mph when in use.

Adjustable Boat Cover Support Kit The Boat Cover Support is an easy to use telescoping support system that keeps your boat cover from sagging and allowing water to pool. When rain doesn't pool and go stagnant in your boat cover, it helps extend the life of the material. The Boat Cover Support is self-standing with support plates on the top and bottom, the bottom support plate also has a foam pad to prevent sliding and protect the boat. The Boat Cover Support adjusts heights easily from 30" to 50" in 2.5" increments to accommodate different styles of boats. The nylon strap assembly is 50' long and fits most boats up to 22' in length. It is easy to install and stores compactly when not in use. Camco also makes a full line of attachments that can be purchased and used with the telescoping support pole. Features: Helps prevent water from pooling in low places on boat cover Helps maintain the quality of your boat cover Height adjusts 30" to 50" to fit different boat styles Fits most boats up to 22' long Easy to install WARNING: This product can expose you to chemicals including LEAD which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.