Shroud Cleat Features: All stainless steel construction, compatible with you stainless steel rigging Will not corrode Easily attached to 5/32" thru 3/8" diameter wire or rod Ideal for flag, radar reflector and steaming shape halyards with an eye for attaching a snap shackle Low profile, projects only 1/2" from shroud

Spreader Flag Halyard Kit Includes 40ft. of polyester line, block with bail and shroud cleat.

Shroud Cleat with Eye Barton Marine's Shroud Plain Cleat with Eye is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage. Features: Wide eye opening for stowage of shackles Clamps onto shroud wire without causing damage Simple and convenient to install Durable marine grade nylon construction Specifications: Color - Black Material - Nylon Length - 100mm (4") Weight - 26 grams In the Box: Shroud cleat w/eye Mounting hardware

Shroud Cleat Barton Marine's Shroud Plain Cleat is a multipurpose cleat that conveniently clamps onto shroud wire (maximum diameter - 8mm (5/16") securely and without causing damage. Features: Clamps onto shroud wire without causing damage Simple and convenient to install Durable marine grade nylon construction Specifications: Color - Black Material - Nylon Length - 100mm (4") Weight - 26 grams In the Box: Shroud cleat Mounting hardware

Splice Line Small Boat Kit for Boats up to 30' C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended. These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits.  Specifications: 2 x LS-3600 Toggle Jaw w/ Splice Eye 2 x LS-2900 Tubular Turnbuckle w/ Splice Eye 70' Grey 1/4" (6mm) Dyneema Splicing and Install Instructions Fid/Needle/Twine

Splice Line Large Boat Kit for Boats up to 40' C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended. These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits.  Specifications: 2 x LS-3600 Toggle Jaw w/ Splice Eye 2 x LS-2900 Tubular Turnbuckle w/ Splice Eye 90' Grey 1/4" (6mm) Dyneema Splicing and Install Instructions Fid/Needle/Twine

Splice Line Gate Kit - Midship for One Side C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended. These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits.  Specifications: 1 x LS-3100 Over Center Gate Hook w/ Splice Eye 1 x LS-3200 Splice Eye to Splice Eye Fitting 1 x LS-3300 Gate Eye to Splice Eye Fitting 1 x LS-3400 Adjuster w/ Splice Eye 6' Dyneema

Splice Line Gate Kit - Aft for One Side C. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the line. Both US Sailing and ISAF now allow Dyneema/ Spectra life lines for offshore racing and Dyneema/ Spectra is also a great product for the cruising sailor that wants to replace their stainless steel life line cables. Professional splicing recommended. These kits include everything needed to install upper Dyneema life lines without gates. For double life lines, buy 2 kits. For adding a gate, use the C. Sherman Johnson Gate Kits.  Specifications: 1 x LS-3100 Over Center Gate Hook w/ Splice Eye 1 x LS-3300 Gate Eye to Splice Eye Fitting 6' Dyneema

Lever Arm Crimper Tool C. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which apply to Johnson hand crimp fittings and instructions only .The use of other tools or crimping fittings other than Johnson hand crimp fittings with Johnson tools can result in failure of the terminal, personal injury or loss of life.  This specific tool is built to handle the stress of crimping stainless fittings. "Nicropress" tools were designed to crimp soft copper and aluminum oval and stop sleeves only.  Specifications: Two cavities for 1/8" and 3/16" hand crimp fittings Good production tool for the dealer

Cable Cutter to 1/4" - Felco C. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which apply to Johnson hand crimp fittings and instructions only .The use of other tools or crimping fittings other than Johnson hand crimp fittings with Johnson tools can result in failure of the terminal, personal injury or loss of life.  This specific tool will give you a clean, crisp cut through 1/4" sized cables. Swiss made.

C-12 Cutter to 3/8" - Felco C. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which apply to Johnson hand crimp fittings and instructions only .The use of other tools or crimping fittings other than Johnson hand crimp fittings with Johnson tools can result in failure of the terminal, personal injury or loss of life.  This specific tool will give you a clean, crisp cut through 3/8" sized cables.

C. SHERMAN JOHNSON   Johnson offers cable and wire fittings in 16th" to 3/8" sizes in type 316 stainless steel for machine swage, Hand Crimp, mechanical termination and splice termination. You can find cable railing hardware and Terminal Tuner, Classic, Decko, Smooth Line, Terminator and Threaded Terminal Turnbuckles to accent the look of any cable system.

Cooler Tie-Down Kit C. Sherman Johnson has designed this ergonomic hook to hook turnbuckle to be used to tie down coolers, chairs, dinghies, casting platforms or any other items that need to be secured. The body of the turnbuckle has a cushioned grip which allows adjustment without tools. Knurled nuts lock the turnbuckles in place. The hooks have a 1" opening. These tie down turnbuckles are constructed of 316 Stainless Steel and the hooks are threaded into bronze inserts to prevent galling. Approximate dimensions are 11-3/4" closed and 15" open. Maximum working load is 1,000 pounds.  Kit Includes: 2 turnbuckles and 2 (48-570) pad eyes

Hinged Pad Eye- 1/4" C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free.  Specifications: T-316 Stainless Steel construction Supplied with backing plate

Hinged Pad Eye- 5/16" C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free.  Specifications: T-316 Stainless Steel construction Supplied with backing plate