|
C-12 Cutter to 3/8" - Felco
C. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which apply to Johnson hand crimp fittings and instructions only .The use of other tools or crimping fittings other than Johnson hand crimp fittings with Johnson tools can result in failure of the terminal, personal injury or loss of life.
This specific tool will give you a clean, crisp cut through 3/8" sized cables.
|
563.69 |
|
|
Cable Cutter to 1/4" - Felco
C. Sherman Johnson Hand Crimp Fittings have proven themselves over the years, however the overall integrity of the system depends on the proper tools for the job. The tools are designed with special width and relief patterns which apply to Johnson hand crimp fittings and instructions only .The use of other tools or crimping fittings other than Johnson hand crimp fittings with Johnson tools can result in failure of the terminal, personal injury or loss of life.
This specific tool will give you a clean, crisp cut through 1/4" sized cables. Swiss made.
|
330.47 |
|
|
Hinged Pad Eye- 3/8"
C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle free.
Specifications:
T-316 Stainless Steel construction
Supplied with backing plate
|
49.51 |
|
|
Quick Release Pin - 3/8" x 13/16"
Specifications:
Diameter: 3/8"
Grip Length: 13/16"
Use with: O2 Series
|
17.94 |
|
|
Danfoss 180Z0029 Adapter 12/24 Unc-3/8" Npt
|
28.85 |
|
|
Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-3/8 Part # 0115-0064-0300 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-3/8 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
2.3 GPM
8.7 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/8"OD
Outlet
3/8"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
Part # 0115-0064-0300
|
227.18 |
|
|
Applications for the March AC-1A-MD-3/8 Magnetic Drive Pump include photographic processing equipment, refrigeration systems, and water displays.
The AC-1A-MD-3/8 has pumped Acetone, Ammonium Chloride, Ammonium Chloride, Ammonium Hydroxide, Citric Acid, Ethylene Glycol, Magnesium Nitrate, Potassium Carbonate, Sodium Borate, Fresh Water, Salt Water, and many more chemicals. The AC-1A-MD-3/8 may have been modified to handle these chemicals.
March Pump's industrial AC-1A-MD-3/8 is an American seal-less centrifugal magnetic drive pump ideal for applications such as chemical recirculation and chemical transfer. It is capable of generating a maximum flow of 2.3 gallons per minute at 0.25 feet, and its maximum head is 4.6 Feet (or around 2PSI). The standard wet end (the materials that come into contact with the solution) is composed of Polypropylene, Buna N, Nylon, Carbon/Teflon, Stainless Steel, and Ceramic Magnet. The inlet connection is 0.375 inch smooth, and the outlet is 0.375 inch smooth. The standard motor is a 1 Phase 115V or 230V 0.05 Horsepower motor, which can be run on 60 hertz on 115V or 50 and 60 hertz on 230V (there are performance differences between the hertz options). The maximum internal pressure the pump can tolerate is 50PSI, and the maximum liquid temperature is 190 Fahrenheit or 87 Celsius. The March AC-1A-MD-3/8 centrifugal magnetic drive pump is capable of handling mildly or highly corrosive chemicals, acids, and solvents.
Unit System 60Hz 50Hz Max Flow
2.3 GPM
8.7 LPM
Max Head
4.6 FT
1 M
Power
.005 HP
.003 KW
Electrical
115V 60HZ 230V 50/60HZ
Type
Centrifugal Mag Drive
Inlet
3/8"OD
Outlet
3/8"OD
Wet End
Polypropylene (Front and Rear Housing), Buna N (O-Ring), Nylon (Impeller), Carbon/Teflon (Thrust Washer), 316 Stainless Steel (Shaft), Ceramic Magnet
|
205.73 |
|
|
45° Adjustable Fitting for Back of UP Series Helms
Typical Application:
Fitting for the back of the UP series helms
Specifications:
ORB, Size #6 to 3/8 COMP FITTING
Helm Side = 9/16 - 18 UNF 2A
Hose Side = 9/16 - 24 UNEF 2A
|
36.20 |
|
|
90° Adjustable Fitting for Back of UP Series Helms
Typical Application:
Fitting for the back of the UP series helms
Specifications:
ORB, Size #6 to 3/8 COMP FITTING
Helm Side = 9/16 - 18 UNF 2A
Hose Side = 9/16 - 24 UNEF 2A
|
17.38 |
|
|
Boss Style T-Fitting - Nickel
Typical Application:
Fitting for back of helm in a dual station installation
Specifications:
ORB, Size #6 to 3/8 COMP FITTING
Cylinder/Helm Side = 9/16 - 18 UNF 2A
Hose Side = 9/16 - 24 UNEF 2A
|
16.48 |
|
|
Orb Brass Tee Fitting - ORB 5 to 3/8" Compression
Features:
Brass
Orb Tee Fitting
|
16.98 |
|
|
Orb Brass Straight Connector - ORB 5 to 3/8" Compression
Features:
Brass
Orb Straight Connector
|
7.54 |
|
|
Orb Brass 90° Elbow - ORB 5 to 3/8" Compression
Features:
Brass
90° Elbow
|
15.06 |
|
|
1/4 NPT to 3/8 T-Fitting
Typical Application:
Fitting used in the back of the previous version of the UP series helms before the boss fitting
Specifications:
1/4 NPT to 3/8 COMP FITTING
Helm Side = 1/4 NPT
Hose Side = 9/16 - 24 UNEF 2A
|
16.64 |
|
|
12-10 Gauge - 3/8" Heat Shrink Ring Terminal - 100-Pack
Gauge Size: 12-10
Screw Size: 3/8"
Quantity: 100
Product Features:
Cross Linked polyolefin tubing is much stronger than PVC tubing and will not burn like PVC
Heat activated adhesive lining provides impervious seal to salt water, oil, acids, and sunlight as well as providing strain relief
Nylon insulator, preferred by experts, for Marine Grade™ resistance to sunlight, water, oil, chemicals, vibration and cut-through damage
UL Listed and CSA Recognized
Highest shrink ratio - shrinks to 1/3 original size
Shrinks at 257° F/125° C
Operating temperature range 40° C to 110° C
ANCOR heat shrink connectors offer heat activated adhesive built into the sleeve of the heat shrink tubing
Shrinks to form a water tight seal and the ultimate vibration and strain relief
Tinned for corrosion resistance
Pure copper for maximum current flow
Brazed seam for maximum strength
WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.
|
45.94 |
|